W dniu 12.11.2015 o 22:44, Gene Heskett pisze:
> On Thursday 12 November 2015 12:02:27 Gene Heskett wrote:
>
>> Greetings, I hope Peter is about;
>>
>> I have smashed up the brass plate I use for tool length sensing, twice
>> today, because the 5i25.0.gpio.003_in is not seeing a probe contact.
What is the error message in terminal?
Are there any errors in dmesg?
Michal
W dniu 21.07.2015 o 12:14, Curtis Dutton pisze:
I have a 5i25 running with 2 7i85s cards. I also have a 7i64 for my io
needs. Today I shut down linuxcnc and restarted. The 7i64 is no longer
recognized. Are there any
Use --write instead of --program
--write is for writing flash (like in 7i80) and --program is to directly write
FPGA (like in 5i20)
Michael
Dnia 19-03-2015 o godz. 8:22 Marius Liebenberg napisał(a):
Hi
I am trying to program my 7i80hd_25 but when I run mesaflash prohrag I
get an error that
What mesaflash version?
Dnia 15-03-2015 o godz. 11:21 Marius Liebenberg napisał(a):
I am trying to change the ip of my 7i80 but I get unrecognised option
--set. My string is ./mesaflash --device 7i80 --set ip=10.10.10.10 as
per the manual.
Any thoughts please.
today. I cannot see any version information.
-- Original Message --
From: Michał Geszkiewicz mic...@wp.pl
To: Enhanced Machine Controller emc-users@lists.sourceforge.net
Cc: Enhanced Machine Controller emc-users@lists.sourceforge.net
Sent: 2015-03-15 12:53:02
Subject: [Emc-users
Dnia 26-11-2014 o godz. 19:18 Niemand Sonst napisał(a):
David,
I am not sure if Jog While Paused is allready implemented in machinekit.
There is sim config in mk for jwp: configs/sim/axis/jog-while-pause9.ini
Michael
Norbert
Am 26.11.2014 um 19:06 schrieb David Armstrong:
ok am i
Dnia 25-11-2014 o godz. 23:36 Pete Matos napisał(a):
That is a bit confusing I agree. If the outputs are showing the movements
then I guess you can assume the machine is moving. I wonder how difficult
it would be to get the display to show what he is doing. Also I am sure
this is a
Hi Alex,
I've done few retrofits of simillar machines, video below.
Originally spindle speed was fully synced with xy velocity but was
disabled due to mechanical problems (it won't saw on lower speeds).
http://www.youtube.com/watch?v=aopjsU7Q5V8
regards,
Michael
W dniu 27.08.2014 19:44, alex
to control the motor drives ?
Thank you for any detail you can share.
Regards
Alex
On Wed, Aug 27, 2014 at 8:23 PM, Michał Geszkiewicz mic...@wp.pl wrote:
Hi Alex,
I've done few retrofits of simillar machines, video below.
Originally spindle speed was fully synced with xy velocity
Multiple instances are possible in MachineKit but I don't know details.
They also fully supports mesa hardware.
W dniu 25.08.2014 00:28, andy pugh pisze:
On 24 August 2014 16:32, Axel Zöllich fa...@zoellich.de wrote:
As I've got a lathe awaking to be controlled by linuxcnc I'me thinking about
Hi,
hm2_7i90 driver which is in 2.6 and master don't use epp driver atm. You
can remove it from hal file.
W dniu 09.06.2014 09:34, Marius Alksnys pisze:
On 06/07/2014 11:42 AM, Michał Geszkiewicz wrote:
W dniu 07.06.2014 09:49, Marius Alksnys pisze:
I compiled mesaflash from given git link
W dniu 07.06.2014 09:49, Marius Alksnys pisze:
I compiled mesaflash from given git link. It does find and work
with 5i24, but can't find 7i90hd.
Use
sudo ./mesaflash --device 7i90 --addr 0x378 --write path/to/bitfile
change address to proper for your setup
I want to use one 7i33 and gpio,
W dniu 03.04.2014 22:26, Philipp Burch pisze:
I understand, 7i80 support requires realtime ethernet, which requires
rt-preempt or xenomai.
I'm optimistic that the LinuxCNC developer community will continue to
work on adding support for these realtime systems, and that when it's
ready we
Hi Seb,
Few questions:
Who made decision about not including ubc and when?
Where are the emails that invite developers to irc meeting to vote this?
Why voting about need to integrate ubc before 2.6 from irc meeting
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Meeting201306 was ignored?
Why you
Hi,
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=commit;h=39db4d1f16be2a3715d95c72eec8fa180bc91233
regards,
Michael
W dniu 26.02.2014 00:22, Jeff pisze:
Hi Peter,
Not being a LinuxCNC developer, I know little about branches etc. I
went to git.linuxcnc.org where I figured stuff might
Hi,
take a look at this commit and generally at this branch:
https://github.com/araisrobo/linuxcnc/commit/bc839716b2cc6cb905cab55f6fe98be87fdd74b8
Michael
W dniu 16.12.2013 17:47, Charles Steinkuehler pisze:
Hmm...I dug into this a bit, and it turns out the Arduino Marlin
firmware doesn't
try without modbus
./configure --enable-run-in-place --without-libmodbus
W dniu 15.10.2013 09:57, Tomaz T. pisze:
$ ./configure --enable-run-in-place
ends with:
configure: error: libmodbus3 not found!
install with sudo apt-get install libmodbus-dev or disable with
I'm trying to install
Compile it directly with these instructions
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC#Building_LinuxCNC_realtime
W dniu 14.10.2013 10:44, Tomaz T. pisze:
Trying to compile but $ make returns me:
~/linuxcnc-fda6359/src$ make
Makefile:55: Makefile.inc: No such file or
Tomaz,
- get current source code of joints_axes3 here:
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=snapshot;h=fda6359085a401fa7ff8af290a4c6a33715d10f3;sf=tgz
- open file src/emc/motion/control.c
- comment line 1279(axis-teleop_tp.max_vel = axis-vel_limit)
- compile it with these
In case that you get sources from git and don't have any source code
changes:
$ git branch --track joints_axes3 origin/joints_axes3
$ git checkout joints_axes3
$ cd src
$ make clean
$ autogen.sh
$ ./configure
$ make
W dniu 10.10.2013 13:40, Tomaz T. pisze:
Now i'm running my machine with
in joints_axes3 branch take a look at axis/sim_mm config.
changes are:
required [KINS]JOINTS setting
separate [AXIS_X] [AXIS_Y] sections and [JOINT_n] sections
in hal file all axis.n. pins changed to joint.n
W dniu 10.10.2013 14:29, Tomaz T. pisze:
Ok, before I do this I should ask if after
200-500k lines in 3d milling.
Michael
W dniu 18.07.2013 17:19, Gene Heskett pisze:
On Thursday 18 July 2013 10:44:58 Michael Haberler did opine:
I'd be interested in what was your biggest-sized G-code program ever
good enough: file size, number of lines - just a rough indication is
fine
Hi,
Dnia Wtorek, 16 Lipca 2013 16:23 propcoder marius.alks...@gmail.com
napisał(a)
Retrofit-plus does not respond, duzi.cz does not have 7i77 in stock,
Lascar page is under construction.. I didn't make a call..
Try email them at supp...@lascar.com
I turns that I will wait for
Hi
See NO_FORCE_HOMING
http://www.linuxcnc.org/docs/html/config/ini_config.html#sub:TRAJ-section
regards,
Michael
W dniu 02.06.2013 21:13, Bruce Klawiter pisze:
As well as running EMC2 I can us my mill manually. When using the mill
manually I use the DRO in EMC2, how do I set each axis to
W dniu 30.05.2013 01:12, Florian Rist pisze:
Hello,
I'm in some trouble as it looks like I'll not be able to get some needed
MESA components fast enough for a project with a very tight deadline
(some thing like 10 days from now).
I would need these cards and controllers, one of each:
branch.)
This is the guide to pull and build it:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ArtekBranch
Thanks Yishin!
It says 12.04, I'm still on 10.04. Does it matter?
Also, what about S-curves? They might be very useful for a fast delta-robot.
2013/4/23 Michał Geszkiewicz mic...@wp.pl
I
W dniu 23.04.2013 12:42, Andrew pisze:
2013/4/23 andy pugh bodge...@gmail.com
On 23 April 2013 10:56, Andrew parallel.kinemat...@gmail.com wrote:
hm2/hm2_7i43.0: Encoder 0: quadrature count error
Though nothing seems to happen, I'm afraid that the encoder might lose
impulses or smth.
Hello,
I've finally got it working, instructions how to install:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Mesa7i80_Driver_For_Linuxcnc_On_Xenomai
it's rather dirty due to many problems under RTAI, clean git repository
in progress.
Many thanks for:
Michael Haberler, John Morris and others for
W dniu 07.04.2012 11:27, Lars Andersson pisze:
Hi Dewey,
thanks for your your addition to .axisrc! I have picked up some gems before
that went into that same file. Makes me wonder what secret language is this,
where can I learn more?
It's 'python' language with 'tkinter' libraries used.
Try use make without sudo
W dniu 17.03.2012 18:33, Viesturs Lācis pisze:
2012/3/17 Michał Geszkiewiczmic...@wp.pl:
sudo apt-get install libboost-python-dev
Thanks, that worked!
./configure completed successfully
sudo make completedsuccessfully
sudo make setuid terminates with error
If you execute 'git clean -x -d -f' in top of linuxcnc source directory,
it will reset to state after clone
regards
Michael
W dniu 17.03.2012 19:13, Viesturs Lācis pisze:
2012/3/17 Michał Geszkiewiczmic...@wp.pl:
Try use make without sudo
Thanks, You are right, there is no sudo in wiki page
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC#Running_emc2
running script is in ../scripts directory
W dniu 17.03.2012 19:51, Viesturs Lācis pisze:
2012/3/17 Michał Geszkiewiczmic...@wp.pl:
If you execute 'git clean -x -d -f' in top of linuxcnc source directory,
it will reset
W dniu 07.06.2011 21:20, Viesturs Lācis pisze:
2011/6/7 Claude Froidevauxmen...@bluewin.ch:
Le 07.06.2011 07:54, Viesturs Lācis a écrit :
Hello, gentlemen!
It seems to me that I am making another trivial mistake, I just do not
understand, where and how.
The thing is that on the robot max
W dniu 16.05.2011 20:01, Viesturs Lācis pisze:
Hello!
I would appreciate, if any knowledgeable person could help me clarify
2 questions:
1) what is current situation with joint vs world limits?
2) and more importantly - how many joints are allowed?
Hello
still up to 9 joints.
Current state
Try disabling ati binary drivers.
Use only software emulation and see what happens.
regards,
Michael
W dniu 05.10.2010 20:22, Dennis pisze:
I've run into a problem that's driving me right over the edge!! I
upgraded my desktop system to Ubuntu 10.04 (from 8.04). This is the
system I use to
Hi,
when you run emc it will close cleanly when you close gui program.
do you have some errors to must close emc in that way (kill, ctrl-z)?
regards
Michael
Sasa Vilic pisze:
If I run from console emc and press Ctrl-Z, it will shut down emc in a
nice way.
But sending SIGINT with kill does
Hi
first select left mouse button line from which you want to start, then
right click.
regards
Michael
For Sale Sticker pisze:
I understand that is how it should work. I just do not get anything when I
right-click. Anyone else have this problem? Am I missing something simple?
---
Hi
That patch was machine specific so it wasn't included in 2.4.x branch.
And I think there could be a problem to apply this patch to v2.4 branch
becouse of toolchanger changes.
I don't have any machine with that toolchanger available to upgrade and
test it to be compatible with 2.4.x.
Hi
Can you attach zipped configs files (hal and ini)? It will be much
easier to check what's wrong.
regards,
Michael
John Dunn pisze:
Hi there, I have installed EMC2 from the live disk on to 2 computers.
Computer No1 has:
Athlon 1GHz processor, 384 Mb memory and 4GB hard drive and works
John Dunn pisze:
Hi Michael, how can I make a zipped folder? I do not use evolution email, I
use a version of Google, Files are in ordinary folder will that do? (I told
you I was not very good with Linux ;-))
in your config dir go up one level, right click on config directory and
'create
hi,
follow these instructions:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Building_emc2_realtime
regards,
Michael
Viesturs Lācis pisze:
Hello!
I have 2 questions about EMC2, I hope that somebody can point me into
some useful direction.
1) Is there a way to update from
You can run make only when configure will run wthout any errors
And you must 'sudo apt-get install libgtk2.0-dev' to fix gtk problem you
have.
regards
Michael
Viesturs Lācis pisze:
Thank You, Jeff and Michal for the suggestions!
They helped me to get to point, when I run
$ ./configure
And
deb http://www.linuxcnc.org/hardy hardy base emc2.4
deb-src http://www.linuxcnc.org/hardy hardy base emc2.4
regards,
Michael
Frank Tkalcevic pisze:
What are the full paths that I need in my Synaptic Package Manager settings
to be able to install emc2 through the package manager? All
forget color pisze:
Let's say you've issued an MDI command via emcrsh such as:
SET MDI G1 X10 Y10 F10
and it's currently in progress. Is there any way to abort that
command while in progress and do something else instead? SET PAUSE
will pause it's progress in the middle, but resume (not
alan battersby pisze:
Having previously made the 2.4.0 pre version on my Opensuse system I
thought I would download the latest 2.4.0 release and make that. I used
git to download the files, ran autogen and configure and make. This time
I got an error see output below. Could anyone explain why
Andy Pugh pisze:
On 12 May 2010 19:19, Slavko Kocjancic esla...@gmail.com wrote:
I still prefer to have complete program (or split part) inside travel's.
Just in case if somebody ring in the door and that take little more time
that I think.
Well, perhaps the Run Anyway? should be
Dave pisze:
On 5/12/2010 4:16 PM, Michał Geszkiewicz wrote:
Andy Pugh pisze:
On 12 May 2010 19:19, Slavko Kocjancicesla...@gmail.com wrote:
I still prefer to have complete program (or split part) inside travel's.
Just in case if somebody ring in the door
You should use VOLATILE_HOME ini file option to make it work.
http://www.linuxcnc.org/docview/devel/html//config_ini_config.html ,
section 2.2.9.1
Regards,
Michael
Alex Joni pisze:
Hi,
this has been just fixed in git for 2.4~pre
http://git.linuxcnc.org/?p=emc2.git;a=commitdiff;h=67944f4
Hi,
This bug was also yesterday fixed in 2.4~pre branch
http://git.linuxcnc.org/gitweb?p=emc2.git;a=commitdiff;h=06b93f6f
thanks for reporting this bug!
regards,
Michael
--
Download Intel#174; Parallel Studio Eval
Use 2.4.0~pre, there are all bugfixed there now, and it has unhome pins
in halui.
Only copy stepgen.c from master to use custom steps.
regards,
Michael
Slavko Kocjancic pisze:
Michał Geszkiewicz pravi:
You should use VOLATILE_HOME ini file option to make it work.
http
Slavko Kocjancic pisze:
Hello...
Now I'm totaly lost. What version to use? Is there safe version?
I'm sorry I was not clear..
How to use git: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Git
Let say you have clean 'git clone' source.
Latest stable release is 2.3.5 and it's officaly
Just more digging.. If I cut program (to have just 50 lines) I can't
replicate the error. Short program work's ok.
Paste your whole config (ini and hal files)
regards,
Michael
--
Download Intel#174; Parallel
Slavko Kocjancic pisze:
Here are HAL and INI.
... seems that this is problem with AXIS handling longer files.
Hi Slavko
I've reproduced this issue in latest development branch.
Stay tuned for bugfix and until fixing it I would recommend using
emc2.3.5 version.
regards,
Michael
Slavko Kocjancic pisze:
Here are HAL and INI.
... seems that this is problem with AXIS handling longer files.
Hi Slavko
I've reproduced this issue in latest development branch.
Stay tuned for bugfix and until fixing it I would recommend using
emc2.3.5 version.
regards,
Michael
Slavko Kocjancic pisze:
2010/4/14 Michał Geszkiewicz mic...@wp.pl
Slavko Kocjancic pisze:
Here are HAL and INI.
... seems that this is problem with AXIS handling longer files.
Hi Slavko
I've reproduced this issue in latest development branch.
Stay tuned for bugfix
Pablo Pais pisze:
I have a 4 axis cilindrical robot.
Axis0 Z height
Axis1 Ro radius
Axis2 Fi angle
Axis3 Omega orientation
Is there any kintmatics module to my robot?
If not, were can i found a manual to compile the module. I have no problems
with te maths of the module,
Gene Heskett pisze:
Hi guys;
I finally had to give up last night turn off the lights monitor and quit
for the day. The computer got so sluggish I couldn't get anything done
although the emc background would keep running for a minute or so after I
stood on the esc key.
My program is
Check attributes of your python file.
Should be executable.
regards,
Michael
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune
Leonardo Marsaglia pisze:
Hello everybody,
I've got a really strange problem with a simple userspace component that
i've already used before. But this time in a new machine i can't make it
work.
Everytime i try to load the component i get a FAILED message.
The python lines are the
Ian W. Wright pisze:
Hi, I'm trying to install a simulator version of EMC2 on a
new laptop on which I have Ubuntu 9.10 Karmic. I've
installed the 'prerequisites' listed in the docs and
downloaded the source with Git. However, when I run
./autogen.sh I get an error saying 'line6: autoconf:
Hi,
Another thing you must do to run your config on master after merge:
If you have local copy of emc.nml file in your config directories you
must copy it's new version from configs/common directory.
More info about it will be at
Erik Christiansen pisze:
On Wed, Jan 06, 2010 at 04:06:25PM +0200, Alex Joni wrote:
What you want for tlo_all_axes is:
git branch --track tlo_all_axes origin/tlo_all_axes
git checkout tlo_all_axes
Thanks again for that. Sadly, the simple table-reading code in
initool.cc on that
Chris Epicier pisze:
Hi all
Got myself a industrial pc, pIII 800MHz, will get 512 MB ram or more. It has
VIA chipset. The machine works well under Damnsmallinux (Kernel 2.4.31) and
Knoppix 5.01. Whenever I try to get it to boot from emc2 live cd, I do not
get further than initram.
I
许军 pisze:
emc2 always appear joint 0 following error
You must provide more info to help you.
regards,
Michael
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify
vh5...@libero.it pisze:
Hello,
I would like to perform some halui commands while the program is running
but I get some errors.
For instance I put a M100 program at the beginning of
my g-code just to make some checks before starting with the production.
Here
there is the code of my M100
Евгений Александрович pisze:
Hello guys,
I try to create pyVCP panel, which show X,Y and Z positions
So I created xml file with lines
number
halpinXdisplay/halpin
format+004.4f/format
/number
create hal file, add PYVCP and POSTGUI_HALFILE in ini file
start Emc with Axis ... I can
Евгений Александрович pisze:
-Original Message-
From: Micha? Geszkiewicz mic...@wp.pl
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Fri, 09 Oct 2009 10:14:17 +0200
Subject: Re: [Emc-users] pyVCP Actual position variable
Евгений Александрович pisze:
This is surely bug and will be fixed in emc 2.3.3
Thanks for bug report,
Michael
Frank Tkalcevic pisze:
If I put in an invalid G76 threading command in some gcode, such as...
G76 P1.6 Z0 I-1.6 J0 K1.6 R2 H0 E0 L0
Where J, the initial depth of cut, is 0, axis gets stuck in an infinite
It seems that EMC doesn't close properly.
Go to config directory and change file name *.var.bak to *.var
for example: machine.var.bak = machine.var
and try run it again
regards Michael
On Sat, 21 Feb 2009 06:12:40 +0100, Donnie Timmons dtimm...@etex.net
wrote:
It was running fine monday
On Sun, 01 Feb 2009 00:54:08 +0100, BRIAN GLACKIN
glackin.br...@gmail.com wrote:
The description for doing the compile on the page is nice. It would be
usefull to have a link to the EMC-dev install wiki page - searching for
that
now.
you open terminal and type:
sudo apt-get install
These are only warning, compiling finished succesfully.
You can go on and test it
regards
Michael
On Sun, 01 Feb 2009 18:03:06 +0100, BRIAN GLACKIN
glackin.br...@gmail.com wrote:
I reinstalled 8.04 (fixing a video issue with my 815 intel video) and
then
reinstalled EMC2-DEV. Added
Hello,
here
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?ContributedComponents#millkins_trivial_kinematics_extended_by_XY_skew_correction
are kinematics module with skew compenastion and on top of that page are
instructions how to install it to EMC2.
regards
Michael
On Sat, 31 Jan 2009
Read this:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Install_To_CompactFlash
regards
Michael
On Mon, 19 Jan 2009 09:07:55 +0100, Renewables Not Reactors
shoot.the@gmail.com wrote:
Can EMC be used from a USB boot stick?
Hello
Attachment is a hal module for converting float to binary output
Regards
Michal
conv_float_8bit.comp
Description: Binary data
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the
From Poland there are at least two people.
We have experience in retrofitting and building new machines.
Dnia 6-08-2008 o godz. 8:08 Dirk napisał(a):
blockquote style=PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex;
BORDER-LEFT: #ccc 1px soliddiv dir=ltrI would like to attend. I
don#39;t know if I
Hello,
Recently I mentioned that my AXIS is skipping some vectors
when I'm resuming program many times. I have heavy modified AXIS and You
mentioned that I must show this error in oryginal one. And here it is:
this is the file: http://www.pastebin.us/?show=m33d4637c
EMC 2.1.6/2.1.7
after start
Hello,
We are working with tool length probing and from gcode program
everything works very nice.
But when we do the same in manual mode to make sth like tool measuring
between programs, after G38.2 code EMC2 shows error message: queue is
not empty after probing. Is this correct behaviour ?
Hello,
I have question about G64 mode.
This is G-code: http://pastecode.com/?show=m9a27296
When I run this in G61 mode and stop at first vector,
emc.stat.motion_line number indicate current vector which is 5.
When I run this in G64 P0.01 mode and stop at first vector,
emc.stat.motion_line
In INI file there are 3 CYCLE_TIME parameters in section DISPLAY, TRAJ
and EMCIO.
For what they are used for and how their values influence on EMC
performance?
Thanks
Michael.
RESIDENT EVIL: ZAGŁADA - kontynuacja filmowych
przebojów z
Hello,
Can You shorty explain me what kind of incorrect path problem was solved
in this release
Michael
Sport, show i sexappeal czyli Mistrzostwa Polski
w siatkówce plażowej mężczyzn - zobacz gdzie grają! - Kliknij:
One thing
Sorry, HALUI command was commented after copying emc_debug error lines to
mail :P
Michal
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to
Hello,
Sometimes I' having joint following error.
When I run program, stop it during arc and want to continue from actual
line (arc), joint following error show up and on screen appeared yellow
line to begin of actual arc.
Where is a problem ?
Michal
Hello
Recently I was having problem with emc turning off while running g-code
files.
Everything was checked but only difference between hanging or not
hanging emc2 I think was double lines in g-code.
But this also happened when g-code has not having double lines.
Fixing up parameters in ini
Hello
Is there any way to add own g-code to emc2 ?
I want g-code with parameter for example M200Pnn.n
witch nn.n is parameter
Michal
Kelnerka, asystentka, księgowa, informatyk
Sprawdź może to właśnie Ciebie poszukują pracodawcy! Kliknij:
Hello,
I have strange problem: after third or fourth execution of g-code file, in half
of file emc turn off with segmentation fault. this behavior was not frequently
but also not regular. Any ideas on what I have pay greather attention?
Michal
Hello,
In axis code current running line is pointed by vars.running_line, but emc
sometimes buffering big part of the g-code and vars.running_line form this
moment is pointing to end of buffer (in fact hundrets of lines ahead). This
happened from time to time-not always. Do you know the way
I have noticed that problem for sure on emc 2.0.1 2.0.5 and 2.1.1 .
I'm using emc2 for binary and heavly modified axis. But for 99% that problem
appeared on not modified interface. I'm afraid that this is problem in emc code
becouse
for sure it happens when g-code file has double lines. I'm
I'm using converters DXF-NGC and if in the project are for exmple two
lines:
(0,0)-(100,100) and (100,100)-(0,0) then in g-code are two moves from
0,0 to 100,100 and reverse.
coords of the both lines are exactly the same to (0.0001) precision.
Michal
I know that sound strange but double lines are the only difference that I
saw between properly executed g-code and that who hang up the emc
Michal
-
Take Surveys. Earn Cash. Influence the Future of IT
Join
Hello everyone,
I have question about saving variables in *.var file after command.abort()
If I abort program in a loop within variables are updated they are writen to
file with values that they have after ending the loop. f.e. loop executed 10
times, abort() in 5 interaction, index variable
Hello
I often use variables in emc2. Problem is than they are zeroing after stop
button click.
Is there any way to avoid this or to extract variables from emc2 while it is in
auto mode before
is executed command emc.command.abort() witch clears the variables.
Thanks,
Michael
I'm using now EMC2 2.1 with axis interface.
Configuration is writable.
I'm also wonder if the *.var file is readed each time I press start button or
once on start of EMC2.
Thanks
Michal
Dnia 15-02-2007 o godz. 16:04 Chris Radek napisał(a):
On Thu, Feb 15, 2007 at 01:33:59PM +0100, Micha?
Hello,
I have question about python interface to emc2:
Is there any way to change data inserted by command gcode.parse() ?
or is a way to parse only a piece of lines without modifing others ?
thanks for any answers
Michal
Ostatnia sobota
93 matches
Mail list logo