Lots of post processors make use of those datums. They shouldn't be
considered static. 53 should be your machine datum that basically doesn't
move. G54.1, G54.2, etc would be good options for setting up additional
work datums.
*Ryan McIntosh*
E4F Designs
(204)770-3682
r...@pebkac.ca
On Fri
Well, what you can do is touch off on a feature like the corner of that
face and tell the machine "Zero is right over there". And many machines
come with buttons which "reset" one or more axes by doing exactly this -
only with a canned routine.
*Ryan McIntosh*
E4F Designs
(204)77
guages) under the gear where it shoulders up to the case can
probably reduce the backlash by a significant amount.
*Ryan McIntosh*
E4F Designs
(204)770-3682
r...@pebkac.ca
On Thu, Nov 23, 2023 at 1:25 PM Chris Albertson
wrote:
>
>
> > On Nov 22, 2023, at 1:06 PM, gene heskett wrote:
.
If that is what happened, I'd recommend getting a high quality _drag_ cable
for future. They'll be marked TRVVP
*Ryan McIntosh*
E4F Designs
(204)770-3682
r...@pebkac.ca
On Sat, Mar 18, 2023 at 7:22 AM Roland Jollivet
wrote:
> A break in one of the wires would cause it be on two phases, vibr
t the risk of damaging
your VFD. Your should _never_ cut power to the VFD while the spindle is in
motion or the inertia of the still spinning spindle will back-drive the VFD
and blow any polarized capacitors in its output.
*Ryan McIntosh*
PEBKAC.ca Technology Solutions
(204)770-3682
r...@pebkac.c
