On 11/4/23 18:39, andy pugh wrote:
LinuxCNC 2.9.1 has been released
Wooo!!!
That's awesome, thanks :-)
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
lt;http://buildbot.linuxcnc.org/dists/buster/2.9-rtpreempt/binary-armhf/?C=M;O=D>
I'm running LinuxCNC on a Raspberry Pi 4B (2 GB) using the normal
debian.org Bookworm arm64 distro, including the Preempt-RT kernel and
the linuxcnc-uspace deb from the debian.org package archive. It works fine.
--
of the SPI firmwares on it, using mesaflash.
--
Sebastian Kuzminsky
On 2/27/23 12:01, John Dammeyer wrote:
Two problems.
One: $249US and two: out of stock at the moment.
Mind you, so is the 7i92H but it was around $89 and with two Chinese BoBs at $5
each comes in much cheaper.
So
ebian.org/raspi-team/image-specs>? I've been using
those to build and run LinuxCNC on my Raspberry Pi 4.
And yeah, because of how fast the RPi4 is, I just build everything
there, natively. I don't feel any urge to cross-compile.
--
Sebasti
are lacking all debian package metadata.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
permission to redistribute them:
http://highlab.com/~seb/bridgeport-r2e3/
The LinuxCNC config for my machine is here:
https://github.com/SebKuzminsky/linuxcnc-config-bridgeport-r2e3
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users
getting the
servo amps to respond.
Has anyone interfaced Meldas TRS-50 servo amps to LinuxCNC? The maintenance
manual we found was not much help in terms of the interface...
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users
part...
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Yep, the buildbot is down. Hope to have it back up in the next day or so.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Those tests run for a long time normally. Try `runtests -v` to get output
while the tests are running.
--
Sebastian Kuzminsky
On February 10, 2022 11:39:58 PM MST, Andy Howell wrote:
>When I run the test suite there are a number of tests that seem to
>hang. It could be I am just imp
triggers an MDI command. Check out halui.mdi-command-XX:
http://linuxcnc.org/docs/devel/html/man/man1/halui.1.html#PINS
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
y... I'll start a
new thread for that.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
under the same model name. It was impossible to tell.
--
Sebastian Kuzminsky
On January 30, 2022 1:58:48 PM MST, Chris Albertson
wrote:
>Is there any disadvantage to placing a PCIe-based Parallel port card on a
>normal PC?
>
>
>On Sun, Jan 30, 2022 at 11:36 AM andy pugh wro
.
There's currently an effort underway to extend this translation
interface to the documentation too -- it currently just covers the
software itself. I'll announce here when that is ready for help from
translators :-)
--
Sebastian Kuzminsky
___
Emc-users
in
your (non-English) language.
We welcome your translations!
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
directly (maybe after some scaling) to a
physical PWM output pin. This physical pin will connect to the control
input of the laser power supply.
--
Sebastian Kuzminsky
On Sat, Aug 14, 2021 at 6:40 AM Les Newell
wrote:
> On 13/08/2021 22:25, Dave Matthews wrote:
> > I come from an el
I've been happy with LinuxCNC 2.8 as-is for running my FFF printer.
--
Sebastian Kuzminsky
On 7/24/21 2:10 PM, Bari wrote:
What are the missing desired or required features in LCNC for
controlling FFF/FDM printers?
___
Emc-users mailing list
Emc
Let's keep focussing on our shared interest in
machining and open source fabrication software, and I look forward to
collaborating with you all for many years to come.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.s
I'm the author of the thermistor component, and it does not work as well as
I had hoped. I've switched to using lincurve for the thermistors on my
linuxcnc 3d printer.
On Thu, Apr 29, 2021, 12:16 andy pugh wrote:
> On Thu, 29 Apr 2021 at 18:28, Peter C. Wallace wrote:
>
> > The resistance vs
On 3/8/21 11:11 AM, andy pugh wrote:
On Mon, 8 Mar 2021 at 17:08, Sebastian Kuzminsky
wrote:
Yes, although the words in buildbot language are different. "2000.docs"
is a builder (an abstract runner of build recipes). It runs on a
buildslave (a computer).
Though a friend
On 3/8/21 5:49 AM, andy pugh wrote:
On Mon, 8 Mar 2021 at 07:20, Sebastian Kuzminsky
wrote:
This will make the docs on wlo copy-paste-able, but it won't help anyone
who wants to build our docs on Wheezy. I can live with that.
Anyone still building docs using Wheezy probably transcribes
s byte-stream
encoding and display appearance with 7-bit ASCII.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
the docs on wlo copy-paste-able, but it won't help anyone
who wants to build our docs on Wheezy. I can live with that.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On 7/26/20 2:10 PM, Gene Heskett wrote:
On Sunday 26 July 2020 15:19:24 andy pugh wrote:
On Sun, 26 Jul 2020 at 04:21, Sebastian Kuzminsky
wrote:
The buildmaster ran out of disk space. I added 100 gigs, should be
fine now. Please let me know if it breaks again.
The buildbot doesn't seem
a 403 too. The plot thickens.
The buildmaster ran out of disk space. I added 100 gigs, should be fine
now. Please let me know if it breaks again.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
ile "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 190, in
setNearestStPoint
min_geo_nr, _ = min(enumerate(self.geos.abs_iter()),
RuntimeError: generator raised StopIteration
Any ideas for a fix? This was supposed to be a quick project.
That looks like a bug in
a little ridiculous, but it does make parts.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
stepping using on-board GPIO:
https://www.youtube.com/watch?v=LKjNOVHhHio
And using a Mesa card: https://www.youtube.com/watch?v=RDKaFJmB254
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
rt preempt.
Thanks for that data point! That's fantastic latency. Is that an
over-night run, or something shorter?
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
So the problem started right after you upgraded to the new RTAI kernel?
That's where I'd look for a problem first.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
is 2.7.15 setup to be put on a USB
drive to install?Thank you to all for your great work.Dale
The release is distributed as an updated debian package from
www.linuxcnc.org. Details on the process are here:
http://linuxcnc.org/docs/2.7/html/getting-started/updating-linuxcnc.html
--
Sebastian
* Solitarily (David Shore)
* Will Glynn
And as always, a heart-felt Thank You to all the folks helping out in
the forum and on IRC, and working on the exciting new features in
as-yet-unreleased versions.
Here's to many more years of progress in LinuxCNC.
--
Sebastian Kuzminsky
anything using this library a
derivative work of LinuxCNC.
IMO, but IANAL.
On Tue, Jun 11, 2019 at 11:45 AM Sebastian Kuzminsky
wrote:
On 6/11/19 11:33 AM, Chris Albertson wrote:
Was Path Pilot linked into the LinuxCNC address space?
To be clear, LinuxCNC is a multi-process
assessment, and they have send their
source code to me and to other LinuxCNC developers.
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
when i added that timing debug output to Task, Chris Radek in
his wisdom warned me that it would be misleading for our users, and I
see now that he was right. Sorry!
--
Sebastian Kuzminsky
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
On Mon, Oct 8, 2018 at 8:54 AM theman whosoldtheworld
wrote:
>
> Where are located definition of class RCS_CMD_CHANNEL ??
It's in src/libnml/nml/cmd_msg.hh
cscope is really good at answering questions like this.
--
Sebastian Kuzminsky
_
expected 'base/binary-armhf/Packages'
> in Release file ( wrong source.list or malformed file )"
Oops, that's a bug in our debian archive! I just attempted to fix it,
but i don't have an armhf machine handy. Can you try updating your
apt source to the one I said above, then run '
mostly built and
distributed by Mesa Electronics.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
onse.
> >
> > Who did you ask?
>
> I asked the question in the IRC channel
If I remember right, sumpfralle and I both said we were not planning
to work on that but that we would welcome a Pull Request
On Tue, Jul 24, 2018 at 1:45 PM Valerio Bellizzomi wrote:
> On Tue, 2018-07-24 at 21:27 +0200, Roland Jollivet wrote:
> > I had a quick look at PyCAM, and FreeCAD's Path Workbench.
> >
> > >From what I see, neither seem to do rest milling (rest machining), which is
> > a limitation of most of the
On Mon, Jul 23, 2018 at 11:07 AM TJoseph Powderly wrote:
> wow
> thanks seb, looking at it now.
> "Index of /~buildmaster/dists/jessie/scratch-sim/binary-armhf"
> (I'm glad I didnt mangle the web page :-) )
What Arm hardware platform are you running LinuxCNC on? I'm just c
ht to know it just doesnt exist
That's a bug in the buildbot webpage, thanks for the bug report.
The debs exist, but the URLs are wrong. They should end with
"scratch-sim", not "scratch-rtpreempt".
I've updated the
aflash is in a separate package from linuxcnc, so
upgrading linuxcnc won't affect your version of mesaflash.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech
___
>Emc-users mailing list
>Emc-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/emc-users
Yes, that'll run LinuxCNC uspace fine. We have Debian packages for it at
linuxcnc.org and on the buildbot.
You can even run the rt-preempt kernel from Debian.Org
t
end) its realtime function will get run once per whatever thread you
"addf" it to, effectively becoming the callback you describe above.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of
spot problems
> with the toolpath before I hit RUN.
I agree with you, i think G54 and TLO should not show up in the DRO by
default.
You can turn it off in the View menu at the top, by unchecking "Show
Offsets".
--
Sebastian Kuzminsky
--
t does seem like the driver loads the firmware and
> > probes the card normally but then appears to search for another card
>
> When was 2.7.11 released?
>
`git show v2.7.11` shows it was made 2017 July 27.
2.7.12
separate G-code simultaneously but still needing to predict
or at least prevent interference. (Not sure this will be possible)
I'd try to do the X/U coupling in the kinematics.
I haven't given any thought to coordinating between multiple instances
of LinuxCNC at that level.
--
Sebastian Kuzminsky
at's true when building for uspace, but when building for RTAI kernel
space of course /usr/include isn't accessible.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech si
p://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Sebastian Kuzminsky
--
Check out the
"motion.motion-type-is-*" output pins to Motion.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.
erate to 0 velocity at the maximum rate (just like if
you hit Escape in Axis), whereas E-stop causes the machine to cut power
to the motors (allowing the machine to coast to a stop).
--
Sebastian Kuzminsky
--
Check out t
would allow maximum
flexibility,
e.g. it could be linked to a UI toggle if needed, or always on/off as
desired.
On 05.12.2017 20:01, Sebastian Kuzminsky wrote:
On 12/05/2017 09:56 AM, Jon Elson wrote:
On 12/05/2017 08:11 AM, Les Newell wrote:
Yup, I can confirm it ignores probe when in auto.
If t
probe trips
when a probe tool is loaded, and ignore all probe trips when no probe
tool is in the spindle.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites
/LinuxCNC/linuxcnc/issues/368
Please comment in that thread, describing your use case.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http
-based UI framwork(s) for LinuxCNC.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_
know if LinuxCNC uses more than one core if it's a dual core
processor? Or is the Real Time Varient restricted to only one core?
All of realtime runs on a single core. The non-realtime stuff
(interpreter, UIs, etc) spreads across all available cores.
--
Sebastian Kuzminsky
tp://sdm.link/slashdot
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the worl
anyone else who asks.
They could do a better job of being a citizen in the LinuxCNC
open-source community, but that's obviously optional.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the w
incremental jogs are
safer than continuous jogs in high latency situations like these.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http
s.poll()
s.homed
(0, 0, 0, 0, 0, 0, 0, 0, 0)
c.home(0)
s.poll()
s.homed
(1, 0, 0, 0, 0, 0, 0, 0, 0)
So the NML communication part is definitely working.
--
Sebastian Kuzminsky
--
Check out the vibrant tech
/ directory of linuxcnc?
If all of that is right, please paste the exact commands you ran and the
exact output they produced.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
on
Stretch-arm64, but no guarantees! Let us know how it goes!
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing list
Emc-users
ub.com/LinuxCNC/linuxcnc/blob/master/src/emc/usr_intf/emcrsh.cc
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/sl
onnected to GPIO 046 and see
if the problem still happens.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://s
.
Version 2.8.0-pre1.3305.gde345856d is the most recent completed build of
the master (2.8~pre branch), as of 14:50 MDT. This version has the bug.
The buildbot is currently building v2.8.0-pre1-3308-g510e1a9, which has
the fix. This new build should be ready within the hour.
--
Sebastian
e latest known version, which should now
be 2.7).
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_
.
Building for arm64 on arm64 is not a cross build. Building for
non-arm64 on arm64 would be a cross build.
I don't have any arm64 machines, so i've never tried building/testing
LinuxCNC on one.
--
Sebastian Kuzminsky
-emulated Arm VMs on an Arm (or Arm64) host, but
have not found suitable hardware.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http
php?g_code=g138745696275
It's kind of a pain If anyone can recommend a 8+ CPU, 8+ GB RAM
arm64 server that runs Debian, i'd love to be educated here. The best
i've found is the SoftIron Overdrive.
--
Sebastian
the debs yourself. This assumes a
native build, not a cross build, so running everything on the BeagleBone
Black:
http://linuxcnc.org/docs/devel/html/code/building-linuxcnc.html#_building_debian_packages
--
Sebastian Kuzminsky
to run them. If that fails on a particular
config, please open an issue on github and attach the old config so one
of us volunteers can fix it for you.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community
that the Python interpreter prints the right errors
Enjoy!
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
worked, as
far as I can tell.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
to our GUIs.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users
Thanks to the folks who contributed patches and fixes for this release:
* Andy Pugh
* Jeff Epler
* John Thornton
* Norbert Schechner
* Sebastian Kuzminsky
And of course, as always, thanks to everyone helping
out in the forums, mailing list, and on IRC,
and to everyone who took the time
can't make HAL net connections to components on a different computer.
This may or may not be an obstacle for your use case.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
that go also?
No, [EMCIO]CYCLE_TIME is needed, it should not be removed.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
have only a few (up to maybe a few dozen?) values to pass in,
consider using HAL pins set from INI variables at load time.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
the dependency on python-gst and gstreamer for 2.7 and
master (2.8~pre) on Stretch for now, possibly breaking some parts of the
gmoccapy and gscreen guis (on Stretch only) until they get the attention
they need from their maintainers.
We've also added hostmot2 firmware debs for Stretch.
--
Sebastian
(both cmd and fb).
Thanks...
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
On 06/20/2017 11:47 AM, Sebastian Kuzminsky wrote:
On 06/20/2017 11:39 AM, Sebastian Kuzminsky wrote:
On 06/20/2017 11:34 AM, Sebastian Kuzminsky wrote:
On 06/20/2017 10:51 AM, andy pugh wrote:
On 20 June 2017 at 17:37, Peter C. Wallace <p...@mesanet.com> wrote:
I suspect this canno
On 06/20/2017 11:39 AM, Sebastian Kuzminsky wrote:
On 06/20/2017 11:34 AM, Sebastian Kuzminsky wrote:
On 06/20/2017 10:51 AM, andy pugh wrote:
On 20 June 2017 at 17:37, Peter C. Wallace <p...@mesanet.com> wrote:
I suspect this cannot work the way you have this setup b
On 06/20/2017 11:34 AM, Sebastian Kuzminsky wrote:
On 06/20/2017 10:51 AM, andy pugh wrote:
On 20 June 2017 at 17:37, Peter C. Wallace <p...@mesanet.com> wrote:
I suspect this cannot work the way you have this setup because of the
instantaneous jump in encoder (feedback) position at
re's a fairly long pause at some stage in
the homing state machine. I wonder if it was during index homing? And
if so, if that's maybe related to this problem? A halscope trace might
show us.
--
Sebastian Kuzminsky
--
next step in debugging this should be to get
a halscope trace of Z homing and f-erroring, while looking at these pins:
hm2_7i43.0.stepgen.02.position-cmd
hm2_7i43.0.encoder.02.position
hm2_7i43.0.encoder.02.index-enable
axis.2.home-sw-in
Trigger on rising signal on axis.2.f-errored.
--
Sebastian
with Tom's config.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc
this helps.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users ma
rs and
bug-reporters, and to the usual list of long-time committers:
* Andy Pugh
* Chris Morley
* Chris Radek
* Dewey Garrett
* Jeff Epler
* John Thornton
* Jon Elson
* Norbert Schechner
* Sebastian Kuzminsky
The full changelog:
* support "auxiliary apps", distributed separately from LinuxCNC
the config I get:
Error: could not insert module
/usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hal_parport.ko: No such device
Do you have three parallel ports enabled on your VM? Does the linux
parport driver see them?
--
Sebastian Kuzminsky
n work.
Anders Wallin did this back in the halcyon days of 2010:
https://www.youtube.com/watch?v=VmjhUvA3YLE
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech
and went 2 GB into swap,
which causes very high latency. If this was a CNC machine it would have
E-stopped with a following error.
Debugging continues...
--
Sebastian Kuzminsky
--
Check out the vibrant tech communi
ai.org, but so far no one has found
the bug. Until that bug is fixed we can not ship this kernel, or a
linuxcnc version based on it, to our users.
If you want to try it, you'll have to build linuxcnc from source
yourself. Both 2.7 and master (2.8-pre) should work.
--
S
e-cad-cam-mc/
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Emc-users mailing li
en I am
> running an RTAI kernel. Do I need to compile 2.8.0-pre1 differently?
Our 3.4-9-rtai-686-pae RTAI kernel has the normal Linux PREEMPT feature
enabled (this is different than the RT-PREEMPT feature, and not as
realtimey), in addition to the RTAI feature.
--
Sebastian Kuzminsky
.
If you still want to make install, set the DESTDIR environment variable
to the directory you want to install into. Something like
"DESTDIR=/home/user1/programs/linuxcnc make install".
Depending on where the DESTDIR path is, you may need root permissions to
write there.
--
Seba
s
>
>
>--
>Check out the vibrant tech community on one of the world's most
>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>_____
xcnc.org/docs/devel/html/code/contributing-to-linuxcnc.html#_signed_off_by_policy),
then I'll gladly apply your patch in LinuxCNC 2.7.
--
Sebastian Kuzminsky
--
Check out the vibrant tech community on one of the world's most
1 - 100 of 1037 matches
Mail list logo
