On Thu, 2008-06-26 at 08:25 -0700, Kirk Wallace wrote:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=330246010908
At $305 someone got a good deal. If only I had been withing driving
distance. :[
--
Kirk Wallace (California, USA
http://www.wallacecompany.com/machine_shop/
Hardinge
Kirk Wallace wrote:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=330246010908
Will they MAKE you take the GE 550 control? If so, you'll have
to dispose of that clunker. I don't believe there's anything
there that would be usable.
Jon
On Thu, 2008-06-26 at 11:09 -0500, Jon Elson wrote:
Kirk Wallace wrote:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=330246010908
Will they MAKE you take the GE 550 control? If so, you'll have
to dispose of that clunker. I don't believe there's anything
there that would be
Kirk Wallace wrote:
On Thu, 2008-06-26 at 11:09 -0500, Jon Elson wrote:
Kirk Wallace wrote:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=330246010908
Will they MAKE you take the GE 550 control? If so, you'll have
to dispose of that clunker. I don't believe there's anything
there
If you had to take it would still be worth it because nobody makes spindles
as good as the one in that HNC -Maybe the control would fall off the
truck on the way home if you were lucky
Terry
On Thu Jun 26 21:00 , Jon Elson <[EMAIL PROTECTED]>sent:
Kirk Wallace wrote:
On Thu, 2008-06-26 at
Now, nobody bid. It's mine, all mine!
Tony
-Original Message-
From: [EMAIL PROTECTED] [mailto:emc-users-
[EMAIL PROTECTED] On Behalf Of Kirk Wallace
Sent: Thursday, June 26, 2008 10:25 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] FYI, HNC on eBay
http
[EMAIL PROTECTED] wrote:
If you had to take it would still be worth it because nobody makes spindles
as good as the one in that HNC -Maybe the control would fall off the
truck on the way home if you were lucky
Well, the spindle on my Sheldon R15-6 (D1-6, 2.25 spindle
through hole,
Tony Bussan wrote:
Now, nobody bid. It's mine, all mine!
Tony
Heh heh! Lucky you!
Well, there is a community of EMC retrofit owners developing on
these.
Jon
-
Check out the new SourceForge.net Marketplace.
It's the
