Isn't the 403 a microAmp device? Or is it microVolt? Seems like most A/D
would need an external preamp.
Eric Keller
Boalsburg, Pennsylvania
On Fri, Mar 26, 2021 at 6:30 PM Andy Pugh wrote:
>
>
> > On 26 Mar 2021, at 21:39, Peter C. Wallace wrote:
> >
> > he common way would be to get a
On Sat, 27 Mar 2021 at 03:47, Karl Schmidt wrote:
> Looks like these guys make some chips - with datasheets in English!
>
> http://www.ichauschina.com/en/products/interpolator.htm
They are a German company...
https://www.ichaus.de/product/iC-MN
They used to have a Sin/Cos development board
On 03/26/2021 10:44 PM, Karl Schmidt wrote:
On 3/26/21 3:34 PM, Feral Engineer wrote:
Does anyone have a working solution for using Heidenhain
LS403 scales with
LinuxCNC? They're 2 phase sinusoidal feedback. Trying to
connect to a mesa
7i95.
Phil T.
The Feral Engineer
They used to build
On 3/26/21 3:34 PM, Feral Engineer wrote:
Does anyone have a working solution for using Heidenhain LS403 scales with
LinuxCNC? They're 2 phase sinusoidal feedback. Trying to connect to a mesa
7i95.
Phil T.
The Feral Engineer
They used to build these with fancy analog circuits - today you can
> On 26 Mar 2021, at 21:39, Peter C. Wallace wrote:
>
> he common way would be to get a Heidenhain EXE box to do the interpolation
Could the 7i49 (with completely different firmware) do it. That is sin/cos
analogue too.
___
Emc-users mailing
:34:05 -0400
> > From: Feral Engineer
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To: "Enhanced Machine Controller (EMC)" >
> > Subject: [Emc-users] Heidenhain LS403 scale
> >
> > Does anyone have a working so
On Fri, 26 Mar 2021, Feral Engineer wrote:
Date: Fri, 26 Mar 2021 16:34:05 -0400
From: Feral Engineer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Heidenhain LS403 scale
Does anyone have a workin
Look for a sin/cos to incremental converter or build one. They pop up
from time to time on ebay for ~$100ea.
On 3/26/21 3:34 PM, Feral Engineer wrote:
Does anyone have a working solution for using Heidenhain LS403 scales with
LinuxCNC? They're 2 phase sinusoidal feedback. Trying to connect to
Does anyone have a working solution for using Heidenhain LS403 scales with
LinuxCNC? They're 2 phase sinusoidal feedback. Trying to connect to a mesa
7i95.
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
www.youtube.com/c/theferalengineer