On Fri, 10 May 2024, John Dammeyer wrote:
Date: Fri, 10 May 2024 18:26:21 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Mesa Card Stepgens?
What type of output driver is us
What type of output driver is used on the 7i84?
John
> -Original Message-
> From: Peter Wallace [mailto:p...@mesanet.com]
> Sent: May 10, 2024 1:54 PM
> To: Todd Zuercher
> Cc: Todd Zuercher via Emc-users
> Subject: Re: [Emc-users] Mesa Card Stepgens?
>
> O
by this?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Monday, April 15, 2024 5:09 PM
To: Todd Zuercher
Cc: Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa Card Stepgens?
[EXTERNAL
On Fri, 10 May 2024, Todd Zuercher wrote:
Date: Fri, 10 May 2024 20:40:53 +
From: Todd Zuercher
To: Peter Wallace
Cc: Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa Card Stepgens?
Peter,
I've ran into another bit of a snag. I have a couple of 24v relays from
On 4/15/24 17:09, Peter Wallace wrote:
On Mon, 15 Apr 2024, Todd Zuercher wrote:
Date: Mon, 15 Apr 2024 20:22:03 +
From: Todd Zuercher
To: Peter Wallace ,
Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa Card Stepgens?
Thanks Peter,
We've had this 7i85s for quite a while
On Mon, 15 Apr 2024, Todd Zuercher wrote:
Date: Mon, 15 Apr 2024 20:22:03 +
From: Todd Zuercher
To: Peter Wallace ,
Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa Card Stepgens?
Thanks Peter,
We've had this 7i85s for quite a while, and it must be one of the early ones
Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Monday, April 15, 2024 3:41 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mesa Card Stepgens?
[EXTERNAL EMAIL] Be sure links are safe.
On Mon
On Mon, 15 Apr 2024, Todd Zuercher via Emc-users wrote:
Date: Mon, 15 Apr 2024 19:27:19 +
From: Todd Zuercher via Emc-users
To: "Enhanced Machine Controller (EMC)"
Cc: Todd Zuercher
Subject: [Emc-users] Mesa Card Stepgens?
I was working on this machine where I need a w
I was working on this machine where I need a whole bunch of extra stepgens. I
am using a Mesa 7i85S and a 7i88 connected to a 5i25 card. I was testing some
of the stepper drives and I noticed that with one of the drive/motor
combinations I am needing to use slightly longer step timing and