-2105ext. 2031
-Original Message-
From: Leonardo Marsaglia
Sent: Wednesday, April 10, 2024 1:06 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Found the main issue. The terminal block in wich
, 2024 7:56 AM
To: Enhanced Machine Controller (EMC)
us...@lists.sourceforge.net>
Subject: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Hello guys, I hope you're doing well
I'm having problems with a Daewoo Puma 12L lathe to index some tools.
The
prob
> > >> -Original Message-
> > >> From: Leonardo Marsaglia
> > >> Sent: Wednesday, April 10, 2024 7:56 AM
> > >> To: Enhanced Machine Controller (EMC) us...@lists.sourceforge.net>
> > >> Subject: [Emc-users] OT: Balluff BRGE1-WSE1
As I could read this is grey code.
Maybe not any specific pattern. What's great with gray code for absolute angle
is only one bit it changed betweeb each
count so no glitch in between.
Nicklas Karlsson
ons 2024-04-10 klockan 16:48 +0100 skrev andy pugh:
> On Wed, 10 Apr 2024 at 15:05,
Found the main issue. The terminal block in wich the turret signals were
connected is broken. Some of them were making contact. I isolate the
terminals and now the no indexing problem is solved.
The only problem I have left to solve is why with some tools (like tool 8
for example) even if the
From what I could find in the manual of the lathe it works in plain binary.
Now I'm trying to measure the signals.
Here's a link to the encoder manual:
https://mp-elektronik.de/wp-content/uploads/2020/07/MP-BA-BRGE1-...-K-SA12-SA13-en.pdf
El mié, 10 abr 2024 a las 12:51, andy pugh ()
On Wed, 10 Apr 2024 at 15:05, Leonardo Marsaglia
wrote:
>
> It seems there is a pattern, but it's a pretty weird one.
Do you know if the output is binary or gray code? Gray code is more
likely.
encoder value
00 = = not used?
01 = 0001 = good
02 = 0011 = good
03 = 0010 = good
04 = 0110
On 4/10/24 08:46, Todd Zuercher via Emc-users wrote:
Are you sure that the machine uses an encoder for the turret positioning? The
fact that it will work at some tool positions seems to sound more like it has a
series of switches, and that one of them isn't working. The switches might be
ry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Leonardo Marsaglia
Sent: Wednesday, April 10, 2024 7:56 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Hello guys, I h
t; switches might be arrayed kind of like a Gray code encoder to give a
> form
> >> of absolute position for each pocket. Loosing one signal could cause
> >> several of the pockets to not be seen and cause an endless hunt.
> >>
> >> Todd Zuercher
> >>
rs] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Hello guys, I hope you're doing well
I'm having problems with a Daewoo Puma 12L lathe to index some tools. The
problem is that some tools work well and others don't seem to be detected
by the control to stop at the position and
2024 7:56 AM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
>
> [EXTERNAL EMAIL] Be sure links are safe.
>
> Hello guys, I hope you're doing well
>
> I'm having problems with a Daewoo Puma 12L lathe to index some tools. The
&
Hi Andy,
It seems there is a pattern, but it's a pretty weird one. Let me sum it up.
Tools 1, 2, 3, 7 and 9 work will in all the cases.
Tools 4, 5, 6 and 10 can't stop in position and the turret keeps rotating.
The interesting thing is tool 10 was working perfectly a few days ago.
Now tool 8
: Wednesday, April 10, 2024 7:56 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] OT: Balluff BRGE1-WSE10 encoder
[EXTERNAL EMAIL] Be sure links are safe.
Hello guys, I hope you're doing well
I'm having problems with a Daewoo Puma 12L lathe to index some tools. The
problem is that some
On Wed, 10 Apr 2024 at 13:03, Leonardo Marsaglia
wrote:
>
> I'm having problems with a Daewoo Puma 12L lathe to index some tools. The
> problem is that some tools work well and others don't seem to be detected
> by the control to stop at the position and clamp the turret. So the turret
> keeps
Hello guys, I hope you're doing well
I'm having problems with a Daewoo Puma 12L lathe to index some tools. The
problem is that some tools work well and others don't seem to be detected
by the control to stop at the position and clamp the turret. So the turret
keeps rotatring until the timeout
16 matches
Mail list logo
