Viesturs we use something similar from AliExpress
They work perfectly
On Tue, 21 May 2024, 23:08 Viesturs Lācis, wrote:
> Hello!
>
> I need to add tool length sensor to a Biesse retrofit. So I wanted to
> ask the audience to share their experience of where to get one.
> I found this:
> https://
I have been thinking about using an old touch probe as a tool setter to
measure both z and diameter offset. Anyone had any luck with that so far?
I think it would be fancy if I could measure the diameter at the same time
as the z offset. My cheap sk40 tool holders have some run out, and using
tool
On Tue, 21 May 2024 at 15:25, Todd Zuercher wrote:
> While your design is very simple and robust, it’s lack of adjustability
> seems like it would be a bit of a problem.
>
I have added adjustability for use as an in-spindle probe to the one I
use. Just a flange with an M2 thread and adjusting s
: Re: [Emc-users] Tool length probe
[EXTERNAL EMAIL] Be sure links are safe.
On Tue, 21 May 2024 at 13:37, Todd Zuercher via Emc-users
mailto:emc-users@lists.sourceforge.net>> wrote:
Don't know about that one. But I did 3d print one that seems like it will work
pretty well.
My desi
On Tue, 21 May 2024 at 13:37, Todd Zuercher via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> Don't know about that one. But I did 3d print one that seems like it will
> work pretty well.
My design has been successfully 3D printed too: https://youtu.be/2ia1_NKQJKs
--
atp
"A motorcycle
l Message-
From: Viesturs Lācis
Sent: Tuesday, May 21, 2024 7:03 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Tool length probe
[You don't often get email from viesturs.la...@gmail.com. Learn why this is
important at https://aka.ms/LearnAboutSenderIdentification ]
otos.app.goo.gl/yiyW5EA5syhmPgWw7
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Viesturs Lācis
Sent: Tuesday, May 21, 2024 7:03 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Tool length prob
On Tue, 21 May 2024 at 13:07, gene heskett wrote:
>
> Probably as good as any. But its overkill, designed to impress the
> visiting frogs.
At $30 it's not very overkill, and foes provide provision for an air plast
to clean the tool of chips prior to measurement which is probably handy as
part o
On 5/21/24 07:05, Viesturs Lācis wrote:
Hello!
I need to add tool length sensor to a Biesse retrofit. So I wanted to
ask the audience to share their experience of where to get one.
I found this:
https://www.aliexpress.com/item/1005002538659888.html
Any thoughts on how good/bad it is?
Viesturs
Hello!
I need to add tool length sensor to a Biesse retrofit. So I wanted to
ask the audience to share their experience of where to get one.
I found this:
https://www.aliexpress.com/item/1005002538659888.html
Any thoughts on how good/bad it is?
Viesturs
10 matches
Mail list logo