Don't feel bad those guys are so fast at making improvements that the
documents can't keep up either LOL...
John
On 25 Apr 2008 at 19:45, Jon Elson wrote:
John Thornton wrote:
On 25 Apr 2008 at 11:16, Jon Elson wrote:
With my controllers, for instance, there are 3-line stanzas for
I'm getting an axis error on axes 0 1 3 it says joint (0,1,3) on limit
switch error but i don't have any limit switches and axis 3 isn't even
plugged in. how do I clear this so i can turn the machine on?
-
This SF.net email
If you used stepconf to generate your config then run it again and unselect the
limit
switches. They will be on the page with the I/O config for your parallel port.
If not then you will have to manually comment the lines out in the hal file
that
pertain to limit switches. To make a line a
On 25 Apr 2008 at 11:16, Jon Elson wrote:
With my controllers, for instance, there are 3-line stanzas for
each limit switch, such as :
newsig Xminlim bit
linksp Xminlim = ppmc.0.din.01.in
linksp Xminlim = axis.0.neg-lim-sw-in
Jon
Jon the new format is a single line using net.
I
John Thornton wrote:
On 25 Apr 2008 at 11:16, Jon Elson wrote:
With my controllers, for instance, there are 3-line stanzas for
each limit switch, such as :
newsig Xminlim bit
linksp Xminlim = ppmc.0.din.01.in
linksp Xminlim = axis.0.neg-lim-sw-in
Jon
Jon the new format is a single
