Tom,
I use ngcgui and just fill in the blanks for length of cut. I have one
called x-trim that I just need speed and length and off I go.
Before ngcgui I just used a file called x-trim.ngc and edited the X and F.
x-trim.ngc
G20 (Units: Inches)
G40 (Cancel Cutter Comp)
G90 (Absolute Mode)
G64
Is there a simple conversational way in Linuxcnc (2.5) to cut a straight line
or a simple pattern? After cutting some parts on a large sheet with the plasma
machine today we wanted to cut a straight line starting from a touch off point
at a specific feed rate ending at a specific distance.
On 05/14/2012 09:24 PM, Tom Easterday wrote:
Is there a simple conversational way in Linuxcnc (2.5) to cut a straight line
or a simple pattern? After cutting some parts on a large sheet with the
plasma machine today we wanted to cut a straight line starting from a touch
off point at a
On May 14, 2012, at 11:39 PM, Sebastian Kuzminsky wrote:
On 05/14/2012 09:24 PM, Tom Easterday wrote:
Is there a simple conversational way in Linuxcnc (2.5) to cut a straight
line or a simple pattern? After cutting some parts on a large sheet with
the plasma machine today we wanted to cut
