Hello gentlemen,
We'd like to control a parallel robot with EMC2 and also with LabVIEW
sometimes. I just wonder if any MESA FPGA card can be used with LabVIEW, or
is there any other card with EMC2 and LabVIEW support? Or some way to
connect EMC2 and LabVIEW (that's unlikely).
I guess that we
2012/1/13 Karl Cunningham ka...@keckec.com
Labview can talk TCP/IP. Maybe it can interface with EMC2 that way.
2012/1/16 Anders Wallin anders.e.e.wal...@gmail.com
I've used LabView real-time and FPGA modules on Windows. There is a
LabView version for Linux, but last I checked there are no
Hai,
Saya membuat profil Netlog dengan foto saya, video, blog, dan event dan saya
ingin menambahkan kamu sebagai teman sehingga kamu dapat melihatnya.
Pertama-tama, kamu harus mendaftar di Netlog! Setelah kamu login, kamu dapat
membuat profil kamu sendiri.
Coba lihat:
I have some work in progress which enables workpiece Z correction by loading a
mesh of probe points into kins. It was inspired by the recent thread on warped
PCB board milling.
this isnt ready yet, but a starter for the interested:
On Monday, January 16, 2012 05:05:23 AM kurniadi engkur did opine:
Hai,
Saya membuat profil Netlog dengan foto saya, video, blog, dan event dan
saya ingin menambahkan kamu sebagai teman sehingga kamu dapat
melihatnya. Pertama-tama, kamu harus mendaftar di Netlog! Setelah kamu
login, kamu
On Monday, January 16, 2012 05:16:05 AM Michael Haberler did opine:
I have some work in progress which enables workpiece Z correction by
loading a mesh of probe points into kins. It was inspired by the recent
thread on warped PCB board milling.
this isnt ready yet, but a starter for the
On 16 January 2012 05:42, a...@conceptmachinery.com wrote:
i there spindle motor and motor drive that can be better used for tapping?
You can monitor motor current on any drive, sometimes it is built in
to the drive, but otherwise there are various forms of current sensing
element that can be
Hi Kurniadi,
Kroklokwafzi? Semememi! Seiokrontro - prafriplo: Bifzi, bafzi; hulalemi;
quasti basti bo...
Peter
kurniadi engkur schrieb:
Hai,
Saya membuat profil Netlog dengan foto saya, video, blog, dan event dan saya
ingin menambahkan kamu sebagai teman sehingga kamu dapat melihatnya.
On 16 January 2012 10:11, gene heskett ghesk...@wdtv.com wrote:
Well, I don't believe this is Navajo. It looks like bayes poison to me.
Spam IOW.
Or possibly one of our subscribers has accidentally sent an invitation
to his entire contacts database.
I did that with LinkedIn, which was
On 16 January 2012 09:04, Andrew parallel.kinemat...@gmail.com wrote:
Thanks, I'm afraid it's too complicated for us. We desided to start with
Adlink PCI-8136 card which has 6 encoder inputs and 6 analog outputs.
Maybe later it will be possible to think about drivers for a MESA card.
It is
On Monday, January 16, 2012 05:41:37 AM andy pugh did opine:
On 16 January 2012 10:11, gene heskett ghesk...@wdtv.com wrote:
Well, I don't believe this is Navajo. It looks like bayes poison to
me. Spam IOW.
Or possibly one of our subscribers has accidentally sent an invitation
to his
Im, sory everybody... i was create user in netlog and accidently
create spam here... :(
Kurniadi
2012/1/16 gene heskett ghesk...@wdtv.com:
On Monday, January 16, 2012 05:41:37 AM andy pugh did opine:
On 16 January 2012 10:11, gene heskett ghesk...@wdtv.com wrote:
Well, I don't believe this
Sounds like a job for probekins..
http://thread.gmane.org/gmane.linux.distributions.emc.user/31345/focus=31389
..
I just seem to have skipped, how exactly the surface mesh file is
created by probing the surface in certain points.
that will be a Delaunay triangulation of the probe
On 16.01.12 05:11, gene heskett wrote:
On Monday, January 16, 2012 05:05:23 AM kurniadi engkur did opine:
Hai,
Saya membuat profil Netlog dengan foto saya, video, blog, dan event dan
saya ingin menambahkan kamu sebagai teman sehingga kamu dapat
melihatnya. Pertama-tama, kamu harus
On Monday, January 16, 2012 06:31:20 AM Erik Christiansen did opine:
On 16.01.12 05:11, gene heskett wrote:
On Monday, January 16, 2012 05:05:23 AM kurniadi engkur did opine:
Hai,
Saya membuat profil Netlog dengan foto saya, video, blog, dan event
dan saya ingin menambahkan kamu
gene heskett wrote:
Surprising considering that many other subscription based lists I am on
suffer much higher rates. I have no clue if its our low profile, or some
pretty decent spam filters at sourceforge. Whatever, the success is
appreciated.
Well I see the apology from Kurniadi ...
But
Sure you look at the tap before using it... if it is worn out toss it
out. New taps are much cheaper than removing a broken tap. All it takes
it a 10x and one eye and one second of time.
John
On 1/15/2012 11:42 PM, a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive
On Sun, 15 Jan 2012, a...@conceptmachinery.com wrote:
Date: Sun, 15 Jan 2012 22:42:44 -0700
From: a...@conceptmachinery.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
Hello!
I have a question:
How can I do software step generation and export it through gpio pins on 5i23?
Is this correct approach?
addf stepgen.make-pulses base-thread
net 1step stepgen.0.step hm2_5i20.0.gpio.00m
net 1dir stepgen.0.dir hm2_5i20.0.gpio.00n
I have a suspicion that
On 16 January 2012 15:44, Viesturs Lācis viesturs.la...@gmail.com wrote:
How can I do software step generation and export it through gpio pins on 5i23?
You will need to add the hm2_5i23.0.write_gpio function to the base
thread (and you will need a base thread)
--
atp
The idea that there is no
On Mon, Jan 16, 2012 at 05:44:47PM +0200, Viesturs L??cis wrote:
Hello!
I have a question:
How can I do software step generation and export it through gpio pins on 5i23?
Why do you want to do this?
--
RSA(R)
2012/1/16 Chris Radek ch...@timeguy.com:
On Mon, Jan 16, 2012 at 05:44:47PM +0200, Viesturs L??cis wrote:
Hello!
I have a question:
How can I do software step generation and export it through gpio pins on
5i23?
Why do you want to do this?
Because the machine has 3 servo motors to be
2012/1/16 andy pugh bodge...@gmail.com:
On 16 January 2012 15:44, Viesturs Lācis viesturs.la...@gmail.com wrote:
How can I do software step generation and export it through gpio pins on
5i23?
You will need to add the hm2_5i23.0.write_gpio function to the base
thread (and you will need a
On Mon, 16 Jan 2012, Viesturs L?cis wrote:
Date: Mon, 16 Jan 2012 18:14:39 +0200
From: [UTF-8] Viesturs L?cis viesturs.la...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
2012/1/16 Peter C. Wallace p...@mesanet.com:
I can do this sometime today
I was very busy last week so got behind on custom bitfiles.
Thank You very much!
I would really appreciate that!
Viesturs
--
RSA(R)
On Mon, Jan 16, 2012 at 6:18 AM, Erik Christiansen
dva...@internode.on.netwrote:
On 16.01.12 05:11, gene heskett wrote:
On Monday, January 16, 2012 05:05:23 AM kurniadi engkur did opine:
Hai,
Saya membuat profil Netlog dengan foto saya, video, blog, dan event dan
saya ingin
On 1/16/2012 1:38 PM, Przemek Klosowski wrote:
On Mon, Jan 16, 2012 at 6:18 AM, Erik Christiansen
dva...@internode.on.netwrote:
On 16.01.12 05:11, gene heskett wrote:
On Monday, January 16, 2012 05:05:23 AM kurniadi engkur did opine:
Hai,
Saya membuat profil Netlog dengan foto saya,
Hi Gene:
Could you give me some idea of what the advantage is of using 2 and 3 stack
steppers? You seem to know a lot and I hope you don't mind me asking dumb
questions.
Thanks
Bill
--
RSA(R) Conference 2012
Mar
On Sun, 15 Jan 2012, a...@conceptmachinery.com wrote:
Date: Sun, 15 Jan 2012 22:42:44 -0700
From: a...@conceptmachinery.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Subject:
2012/1/16 andy pugh bodge...@gmail.com
It is probably easier to write an EMC2 driver for the Adlink card.
If the encoder counts and analogue outputs are presented as registers
on the PCI bus then it is all fairly straightforward, this forum
thread tracks the development of a driver for an ISA
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
I have been using rigid tapping with EMC2
On Monday, January 16, 2012 02:37:43 PM gene heskett did opine:
On Sunday, January 15, 2012 09:20:33 PM Mag. Dr. Nikolaus Klepp did
opine:
You know you have a problem when you first have to explain what the
thing was before you can explain why what you did with the thing
was so cool
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
I have been using rigid tapping with EMC2
are pure crap with horrible run outs. Does anyone know of a source for
.125 collects for the HF die grinder? Hopefully that run truer than their
1/4 supplied collect?
Let me know if you find a source. I gave a burned out grinder to a machine
shop locally that advertised no job too small
On Monday, January 16, 2012 04:07:22 PM Cathrine Hribar did opine:
Hi Gene:
Could you give me some idea of what the advantage is of using 2 and 3
stack steppers? You seem to know a lot and I hope you don't mind me
asking dumb questions.
Thanks
Bill
As I see it, its a tradeoff, you
On Monday, January 16, 2012 04:29:38 PM Jon Elson did opine:
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping? Problem with use tap is that spindle motor can easy crash
tap and after that extra charge - + equipment - to remove
On Monday, January 16, 2012 04:35:12 PM a...@conceptmachinery.com did opine:
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping?
Problem with use tap is that spindle motor can easy crash tap and
after that extra charge - +
On Monday, January 16, 2012 04:56:19 PM BRIAN GLACKIN did opine:
are pure crap with horrible run outs. Does anyone know of a source
for .125 collects for the HF die grinder? Hopefully that run truer
than their 1/4 supplied collect?
Let me know if you find a source. I gave a burned out
On Mon, 16 Jan 2012 16:28:58 -0500
gene heskett ghesk...@wdtv.com wrote:
On Monday, January 16, 2012 04:07:22 PM Cathrine Hribar did opine:
Hi Gene:
Could you give me some idea of what the advantage is of using 2 and 3
stack steppers? You seem to know a lot and I hope you don't mind
a...@conceptmachinery.com wrote:
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
I have been
On 16 January 2012 22:06, Cathrine Hribar bhri...@bresnan.net wrote:
are u saying that the nema 34 would be equal to a nema 23 three stack?
Three-stack steppers in 23 size seem to be quite slow. I haven't ever
tried a 34, but I understand that they have the same problem.
I think you need to
On Monday, January 16, 2012 05:19:37 PM Cathrine Hribar did opine:
On Mon, 16 Jan 2012 16:28:58 -0500
gene heskett ghesk...@wdtv.com wrote:
On Monday, January 16, 2012 04:07:22 PM Cathrine Hribar did opine:
Hi Gene:
Could you give me some idea of what the advantage is of using 2
Ouch. Plays heck with my SS check. How is the run out on those? I have
measured above 20 thou if I just shove it in and tighten, and when dealing
with solid carbide wood router bits I have been able to turn those in the
collect and usually get it down around 5 thou. Still way too sloppy but
a...@conceptmachinery.com wrote:
Hi
Tapping cycle use very slow motion, why drive can not stop motion of spindle?
if max rpm for tapping around 100 rpm , can drive stop spindle ?
it is possible to program for 70% or torque that actually will crash tap,
to have some safety
Is 1200 RPM slow? I
Ed wrote:
If Fanuc, Siemens, Mazak, et al have not implemented torque limiting
for taps I would guess that it is much more difficult than it looks.
Yes, I would think that the spindle must come to a stop within 5 degrees
of rotation from
when the overload is detected. I think that
gene heskett wrote:
That was when I learned about EDM to remove the taps. :) Slow, but does
the job without hurting the hole. I have since built a better PSU for
that, works nicely but you can hear it running blocks away, very _VERY_
noisy, estimated 140db inside the teeny shop I have.
On Monday, January 16, 2012 10:32:12 PM BRIAN GLACKIN did opine:
Ouch. Plays heck with my SS check. How is the run out on those? I
have
measured above 20 thou if I just shove it in and tighten, and when
dealing with solid carbide wood router bits I have been able to turn
those in the
On Monday, January 16, 2012 11:00:35 PM Jon Elson did opine:
gene heskett wrote:
That was when I learned about EDM to remove the taps. :) Slow, but
does the job without hurting the hole. I have since built a better
PSU for that, works nicely but you can hear it running blocks away,
Robert,
Thanks that was exactly what I was looking for. How do you handle the tool
changers? I am using classicladder and it seems to work well. The turret
in the video looks similar to the W axis on my Hitachi Seiki Lathe.
Clint
-Original Message-
From: robert
49 matches
Mail list logo
