Hi all,
I am getting a large voltage drop when I connect the analog outputs from the
7I33 to the load. With no load they show the correct voltages. The Mesa
manual states Due to power supply limitations, The 7I33 has limited DC
output drive capability and should not have loads of less than 5K
] Mesa 7I33 Aux Power
Hi all,
I am getting a large voltage drop when I connect the analog outputs from the
7I33 to the load. With no load they show the correct voltages. The Mesa
manual states Due to power supply limitations, The 7I33 has limited DC
output drive capability and should
Peter,
I think that agrees with what I am seeing. I measured the load and in fact
it is 20K ohm. I also tried an AUX 5 V supply, and as John said, it made
almost no difference (went up by about 1/2 mA). The 5V looks to be good,
there is other general I/O which all are working fine.
I also
