Howdy,
I've used e16 since the pre days, but since the 0.16.8 upgrade
where I had to lose my config info and create a new config dir, window
maximize and minimize has a noticeable and annoying delay :)
Everything is working fine, except for a 1 second delay after
I minimize windows (lines drawn
On Wed, Oct 01, 2008 at 07:47:46PM +0200, Kim Woelders wrote:
On Wed, 01 Oct 2008 17:39:15 +0200, Marc MERLIN [EMAIL PROTECTED] wrote:
Howdy,
I've used e16 since the pre days, but since the 0.16.8 upgrade
where I had to lose my config info and create a new config dir, window
maximize
On Wed, Oct 01, 2008 at 09:57:48PM +0200, Kim Woelders wrote:
Hmm... tried your configuration with a 0.16.8.10. For me it works just
nice and snappy as I would expect, no annoying delays.
Thanks for looking.
Not sure how to figure this out...
Can you say if it's a busy delay, like is the
On Wed, Oct 01, 2008 at 03:47:05PM -0700, Marc MERLIN wrote:
Argh, I looked at the deb build:
#make happy little 386 friendly debs
DEB_CONFIGURE_EXTRA_FLAGS = --enable-mmx=no --prefix=/usr --exec-prefix=/usr
--disable-amd64
Ubuntu looses on that one, although I suppose it'd be better
With 0.16.8.10.dfsg, I have many windows, they overlap and go on top when I
click on them, as expected.
With audacious, it overlaps my firefox window, I cannot force the firefox
window on top until I select set stacking normal or below fo the audacious
window.
That works until I bring audacious
On Thu, Oct 16, 2008 at 11:54:02PM +0200, Kim Woelders wrote:
On Wed, 15 Oct 2008 20:58:58 +0200, Marc MERLIN [EMAIL PROTECTED] wrote:
With 0.16.8.10.dfsg, I have many windows, they overlap and go on top
when I
click on them, as expected.
With audacious, it overlaps my firefox window, I
On Wed, Jul 28, 2010 at 04:54:45PM +0200, Kim Woelders wrote:
KeyDown CA Tab focus list
doesn't quite seem to do it.
KeyDown A Tab focus next
It should be part of the default setup though.
It likely was, and I likely disabled it eons ago since it conflicts with a
keybinding I
Howdy,
I'm a long time e16 user, and I'm giving e17 one more shot after a few
tries in the last 10 years.
Can you help me figure out if I did anything wrong and point me to the
right places if needed?
I got 0.16.999.55225-1 from debian-testing and I see from
On Mon, Feb 13, 2012 at 12:13:38PM +0900, Carsten Haitzler wrote:
On Thu, 9 Feb 2012 19:35:21 -0800 Marc MERLIN marc_...@merlins.org said:
hey marc! :)
'Raster', that sounds familiar. Did we work somewhere together, or maybe we
met at some linux conference in Australia or something? ;-)
I
Thanks to you folks for the replies, I'll reply to the bits I haven't
touched yet.
On Fri, Feb 10, 2012 at 11:48:02PM +0900, Jérôme Pinot wrote:
2) systray.
The mailing list says to read the FAQ but does not give a
link. I already read http://trac.enlightenment.org/e/wiki/FAQ
Is
So I think I'm mostly ok for now:
On Mon, Feb 13, 2012 at 10:22:46AM -0800, Marc MERLIN wrote:
The good news is that the lucid packages install fine on debian testing, so
I picked that for now.
The only problem I found was that my application menu expands to an empty
menu.
The old (debian
I steup a bunch of xfce4 terminals on my screen, I set them up perfectly,
and used the window remember screen in advanced mode.
I launched the windows with:
xfce4-terminal -T window1 --role=window1
xfce4-terminal -T window2 --role=window2
xfce4-terminal -T window3 --role=window3
e17
On Wed, Feb 22, 2012 at 09:20:19AM +0900, Carsten Haitzler wrote:
On Tue, 21 Feb 2012 14:57:03 -0800 Marc MERLIN marc_...@merlins.org said:
can u check icccm/netwm properties (click on window icon -
settings-icccm/netwm).
Yes, they show up there, although in an almost unreadable light grey
On Tue, Feb 21, 2012 at 04:43:35PM -0800, Marc MERLIN wrote:
does xfce-terminal show the commandline you used? xterm certainly does.
Grr, that's it, it does not, so e17 wasn't able to capture the proper
command line.
Actually, it was there, I was confused.
ps shows:
xfce4-terminal -T
On Tue, Feb 21, 2012 at 09:20:50PM -0800, Marc MERLIN wrote:
Ok, so I got myself out of the whole I was in, but now I'm apparently missing
the setting
for 'save now and do not track changes afterwards'.
How I disable 'track changes'.
I have save all settings on, but not 'keep current
On Fri, Feb 24, 2012 at 10:06:28AM +0900, Carsten Haitzler wrote:
On Thu, 23 Feb 2012 16:25:13 -0800 Marc MERLIN marc_...@merlins.org said:
On Tue, Feb 21, 2012 at 09:20:50PM -0800, Marc MERLIN wrote:
Ok, so I got myself out of the whole I was in, but now I'm apparently
missing
I'm used to the e16 model where I carefully layed out my windows to be
in the right place and the right size, and save that.
During use, I have to sometimes move some of them, and resize them, and
kind of undo my carefully crafted world order :)
When I restarted e16, it would restart all clean
On Fri, Mar 16, 2012 at 05:55:51PM +0900, Carsten Haitzler wrote:
On Thu, 15 Mar 2012 07:58:40 -0700 Marc MERLIN marc_n...@merlins.org said:
On Thu, Mar 15, 2012 at 01:27:27AM +0900, Carsten Haitzler wrote:
On Sat, 3 Mar 2012 09:57:05 -0800 Marc MERLIN marc_...@merlins.org said
With e16, I could go to a text terminal, run eesh restart, or restart e16
with the 3 finger salute when it worked.
I haven't quite managed to do either with e17.
Help :)
Thanks,
Marc
--
A mouse is a device used to point at the xterm you want to type in - A.S.R.
Microsoft is to operating
On Sat, Mar 31, 2012 at 08:47:23PM +0200, thomasg wrote:
To be honest: I don't see any question besides the thread topic and I
have no clue what you really want to know, but a wild guess:
What you're looking for is DISPLAY=:0 enlightenment_remote -restart
Sorry, I thought it made sense, but
I remember installing an older E17 which asked me at setup time if I set
installing on a low power device or a laptpo.
When I installed the newer e17, I didn't get that question and I have a
blng theme (A-BlingBlack).
Powertop currently says for my W500 thinkpad:
The battery reports a discharge
On Sun, Apr 08, 2012 at 09:35:36AM +0800, P Purkayastha wrote:
What modules are you using?
Good question:
gandalfthegreat:~$ enlightenment_remote -module-list
Module -- Status
gadman -- Enabled
start -- Enabled
ibar -- Enabled
ibox -- Enabled
dropshadow -- Enabled
clock -- Enabled
battery
On Sun, Apr 08, 2012 at 12:00:57PM +0900, Carsten Haitzler wrote:
On Sat, 7 Apr 2012 12:02:18 -0700 Marc MERLIN marc_...@merlins.org said:
that setup just changed framerate and wallpaper really. if e is idle - ie you
aren't moving windows around, resizing things, it isn't animating stuff
I have a quad head config.
Is it possible to have the bottom bar be just on one screen instead of all
4?
Thanks,
Marc
--
A mouse is a device used to point at the xterm you want to type in - A.S.R.
Microsoft is to operating systems
what McDonalds
I'm using 4 LCDs with a 4 port nvidia card.
The 4 displays are put together using xrandr and aren't separate displays.
I'm can straddle windows between screens.
But I guess this new fancy way of doing things does not export xinerama
info, and e17 does not know that those screens are related it
On Mon, Nov 05, 2012 at 04:16:03PM -0800, Marc MERLIN wrote:
I'm using 4 LCDs with a 4 port nvidia card.
The 4 displays are put together using xrandr and aren't separate displays.
I'm can straddle windows between screens.
But I guess this new fancy way of doing things does not export
Hi,
Thanks for your answers,
On Mon, Nov 05, 2012 at 11:47:13PM -0300, Wido wrote:
E17 DOES know about it,
Yes, it sure does, it just defaults to making each screen separate which is
the opposite of what I'd like. In my xinerama days, I used e16 with my 4
LCDs as one giant display that all
On Tue, Nov 06, 2012 at 01:59:36AM -0300, Wido wrote:
Obviously to each their own. I'm so used to E which I've used since 1999
back when Raster was on the other side of the cube wall and I could throw
things at him :)
It's hard to change now, I really like the one giant screen way of
On Tue, Nov 06, 2012 at 07:26:40PM +0900, Carsten Haitzler wrote:
Does anyone know how I can get e17 to deal those 4 screens as if it were a
single big one?
Is there a way to fake xinerama info with those newer X servers to make e17
happy?
there is.
enlightenment -h | grep fake |
(fixed post and resent to list)
On Wed, Nov 07, 2012 at 05:50:38PM +0900, Carsten Haitzler wrote:
I ran:
/usr/bin/enlightenment_start -fake-xinerama-screen 1920x1200+0+0
-fake-xinerama-screen 1920x1200+1920+0 -fake-xinerama-screen
1920x1200+0+1200
-fake-xinerama-screen
On Wed, Nov 07, 2012 at 01:18:31PM -0800, Marc MERLIN wrote:
Ok, so I did -fake-xinerama-screen 3840x2400
and indeed now it ignores the fact that I have 4 monitors.
(...)
I'm willing to believe that your users are happy with the new e17 way. I
guess I got so used to how I was doing
On Fri, Nov 09, 2012 at 10:19:40AM +0800, P Purkayastha wrote:
On 11/09/2012 03:09 AM, Marc MERLIN wrote:
Otherwise, I still didn't quite find how I can add a simple 'lock' button to
my shelf. Is there not a way to have a run everything icon on a shelf and
have
it call xlock on disk
On Fri, Nov 09, 2012 at 07:54:40PM +0900, Carsten Haitzler wrote:
Ok, I found out yesterday that the e17 code for a huge display with fake
xinerama is broken and offsets things on other screens (I sent details with
screenshots to Raster directly).
Also, it seems to break the remember
On Sat, Nov 10, 2012 at 09:59:37AM +0900, Carsten Haitzler wrote:
You're correct that I don't need virtual desktops with 4 screen, and I
indeed don't have any.
Now that you convinced me that I actually don't really need a pager without
virtual screens (see, you didn't waste your time :) ),
When I go to battery, I often apply some battery saving techniques, like
killall -STOP firefox chrome
unload, some modules, etc, etc.
For e17, I'd love to be able to freeze the fancy panel/shelf with icons and
systray.
If I killall -STOP enlightenment, I see further battery savings, but
stopping
First, my apologies for the very late reply. I did read your answers and
worked on them, but didn't have enough good data to reply.
What I found is that something in enlightenment goes into a tight loop
if I SIGSTOP a program like firefox-bin.
I tried unloading all modules and the tight loop does
On Mon, Sep 16, 2013 at 08:30:48AM -0700, Marc MERLIN wrote:
First, my apologies for the very late reply. I did read your answers and
worked on them, but didn't have enough good data to reply.
What I found is that something in enlightenment goes into a tight loop
if I SIGSTOP a program like
So I've been looking at switching to Terminology, but I'm not super
interested in having a bugn of trees and pacakges I'll have to maintain
from source and install manually with untracked files.
I've done this before in past years, spent hours at it, ended up with
unpackaged mess, and honestly I
On Tue, Sep 17, 2013 at 04:43:18PM +0100, Mick wrote:
I just tested on 0.17.3, it worked fine. E kept working normally after
sending firefox a SIGSTOP, and firefox picked up normally after SIGCONT.
I can confirm that firefox works fine here with SIGSTOP and SIGCONT, *but*
battery
On Sun, Sep 22, 2013 at 05:40:03AM -0400, John Holland wrote:
I have debs for 0.17.3 at www.vin-dit.org
Visit the web page for info (what to put in sources.list)
I have a terminology deb there.
I forgot to get back to you on this. Thank you for the packages.
I have terminology working fine
On Sun, Sep 29, 2013 at 12:36:53PM +0900, Carsten Haitzler wrote:
Three suggestions for raster:
1) online help popup. Someone should know what the keys are without having
to find README inthe source (as in binary packages).
it's in the TODO file. :)
I missed that, thanks. I see the
On Sun, Sep 29, 2013 at 04:17:58PM +0900, Carsten Haitzler wrote:
I'm not sure I'm doing the right thing. CTRL-SHIFT-home is not a click, and
is slow. How do you get the tab display?
it's ALWAYs there top-right overlayed on the terminal. 4 squares in the
top-right with numbers next to
On Sun, Sep 29, 2013 at 03:38:58PM -0700, Marc MERLIN wrote:
If I changed my hardware config, and e17 has my shelf configured at the
bottom of Display 2 when I only have one display anymore, how can I move
Shelf#1 from Display 2 to Display 0, or re-create it if needed (after
deleting it first
Since I upgraded to E 0.17.3, suspend still works (I use acpid to do that).
Every time I come back from S3 sleep, I get this popup:
_sys_error_action_failed
Enlightenment is busy with another request
Marc
--
A mouse is a device used to point at the xterm you want to type in - A.S.R.
Microsoft
On Mon, Sep 30, 2013 at 12:46:17PM +0800, P Purkayastha wrote:
On 09/30/2013 07:14 AM, Marc MERLIN wrote:
On Sun, Sep 29, 2013 at 03:38:58PM -0700, Marc MERLIN wrote:
If I changed my hardware config, and e17 has my shelf configured at the
bottom of Display 2 when I only have one display
idea what to do?
Thanks,
Marc
On Sun, Sep 29, 2013 at 01:40:06PM -0700, Marc MERLIN wrote:
Aah, so it looks like my terminology build is either too old or bad.
I have 0.3.0-1 built by John.
I do see a few errors from it, not sure if can't load module generic is bad.
ERR12975:emotion-generic
On Thu, Oct 03, 2013 at 12:01:57PM +0900, Carsten Haitzler wrote:
it *IS* the out of the box experience with terminology in git. it requires
no
configuration, no special theme or changes. it's the default. if you are on a
package and that package has altered the default experience, then look
I found out I can't strace e17 anymore, I get
root# strace -f -p 4750
attach: ptrace(PTRACE_ATTACH, ...): Operation not permitted
note that this is as root, so it's not the
/proc/sys/kernel/yama/ptrace_scope
issue.
I can strace other things as root, so the only other reason I can think
of is
On Thu, Nov 07, 2013 at 08:21:36AM +0900, Carsten Haitzler wrote:
On Wed, 6 Nov 2013 07:04:15 -0800 Marc MERLIN marc_...@merlins.org said:
I found out I can't strace e17 anymore, I get
root# strace -f -p 4750
attach: ptrace(PTRACE_ATTACH, ...): Operation not permitted
note
Due to various reaons, I sometimes close a window (the X in the corner)
by mistake.
Is there a way to ask E to always give me a confirmation dialog before
closing the window?
Thanks,
Marc
--
A mouse is a device used to point at the xterm you want to type in - A.S.R.
Microsoft is to operating
On Mon, Feb 10, 2014 at 12:00:21PM +0900, Carsten Haitzler wrote:
On Sun, 9 Feb 2014 16:42:38 -0800 Marc MERLIN marc_...@merlins.org said:
window menu - locks - prevent this window from being closed.
Thanks, that's a reasonable workaround, but I can I make a feature request?
I'd be happy
On Tue, Feb 18, 2014 at 08:23:52AM +0900, Carsten Haitzler wrote:
Would you be ok with adding a 'confirm closing' dialog as an option (off by
default of course)?
i wouldn't have a problem with that as an option... just someone has to do
it. :)
Wait, e18 doesn't have a gateway that
On Mon, Mar 17, 2014 at 10:49:36PM +0900, Cedric BAIL wrote:
What can be done to speed things up for older hardware?
Basically with E18 the composite module is the core of Enlightenment,
you can only disable the configuration module. Reason is that for
Wayland it is the only sane way for us
On Sat, Jan 25, 2014 at 05:32:25PM -0500, John Holland wrote:
I have made debs for Wheezy (latest wheezy, 7.3 - you may need to
apt-get upgrade) for E18 etc. Also terminology and econnman, but NOT
python-efl. If you want to use econnman you'll have to install the -dev
debs for libefl, etc, and
On Mon, Apr 28, 2014 at 01:47:30PM +1000, Dave wrote:
What happens if you manually try to install emotion-generic-players, and
then do the enlightenment install?
i.e apt-get install emotion-generic-players
or alternately:
wget
e18 did a good job picking up my saved profile, or at least parts of it,
but some things got lost, mostly key+mouse bindings I use all the time
and very much miss right now.
ALT+But1+drag - move window under cursor
ALT+But2+drag - resize window from its nearest side or corner
But3 on the desktop
Does the lack of answer mean that those bindings are gone in e18?
Please tell me it's not so :-/
How do you resize a window withouth precisely grabbing the few pixels at the
right corner without that?
Thanks,
Marc
On Tue, Apr 29, 2014 at 10:31:06AM -0700, Marc MERLIN wrote:
e18 did a good job
On Wed, Apr 30, 2014 at 04:57:53PM +0200, Jérémy Zurcher wrote:
Hi Marc,
there are still working on all my boxes and never stopped.
you can edit the mouse bindings through Settings-Input-Mouse Bindings
Thanks, I couldn't find that menu.
Mmmh, I'm wondering if my e18 deb is broken, or what
On Thu, May 01, 2014 at 11:44:41AM +1000, Dave wrote:
Can't see Settings-Input-Mouse Bindings?
Can you go to Settings-Extensions-Modules-Settings? Check that the Input
Control Setting module is loaded.
Good question. I just checked and the module is loaded.
Seems like e18 is receiving
On Wed, Apr 30, 2014 at 09:43:08PM -0700, Marc MERLIN wrote:
On Thu, May 01, 2014 at 11:44:41AM +1000, Dave wrote:
Can't see Settings-Input-Mouse Bindings?
Can you go to Settings-Extensions-Modules-Settings? Check that the
Input
Control Setting module is loaded.
Good question. I
On Fri, May 02, 2014 at 12:53:17PM +1000, Dave wrote:
In the year 2014, of the month of April, on the 30th day, Marc MERLIN wrote:
My guess was correct, xmodmap it is.
xmodmap -e keycode 108 = Mode_switch Alt_R Meta_R Alt_R Meta_R
breaks e18 as in Alt_L (another key, 64) stops working
On Fri, May 02, 2014 at 05:29:31PM +0900, Carsten Haitzler wrote:
keycode 133 = Multi_key
That would work great if my laptop had windows keys, but it doesn't :)
So I king of have to get right alt working as multi again soon :)
(I have right ctrl, but that's mapped to compose)
On Fri, May 02, 2014 at 08:51:46AM -0700, Marc MERLIN wrote:
On Fri, May 02, 2014 at 05:29:31PM +0900, Carsten Haitzler wrote:
keycode 133 = Multi_key
That would work great if my laptop had windows keys, but it doesn't :)
So I king of have to get right alt working as multi
On Mon, May 12, 2014 at 02:07:30AM +1000, Dave wrote:
I had a little look at the enlightenment source code to try and figure this
out, half as an excuse to start learning about the code for enlightenment.
I traced the problem down as far as the e_bindings_mouse_button_find
function.
On Tue, May 13, 2014 at 06:11:01PM +1000, Dave wrote:
In the EFL source tree, edit the src/lib/ecore_x/xlib/ecore_x.c file, and
comment out the following line:
ECORE_X_MODIFIER_ALTGR = _ecore_x_key_mask_get(XK_Mode_switch)
It's not root cause of the issue, but it'll fix things for you.
(I'm resending this to the list under the original subject line for the
archives)
On Fri, Jul 04, 2014 at 02:00:59AM -0700, raster (Carsten Haitzler (Rasterman))
wrote:
raster added a comment.
ok. i've taken a deep look at this. finally. and here is the problem. the
xmodmaps above marc
On Sat, Jul 12, 2014 at 08:08:55PM -0400, John Holland wrote:
I have been working on a new build of .deb's for Debian Wheezy of E18
(current releases from download page)
I got everything built but when I test the results of my work by issuing a
enlightenment_start I get the following
I had this problem with e17, and now same thing with e18
Here's powertop when I'm on batteries:
5.66 W 11.1 ms/s 269.5Process
/usr/local/opt/google/chrome-beta/chrome --user-data-dir=/home/me
4.71 W 96.8 ms/s 224.9Process
On Sun, Jul 20, 2014 at 12:43:05PM +0900, Carsten Haitzler wrote:
i believe that is number of wakeups over the 5s poll... do you have a little
spinning thing next to the icon on the top-left in the window border of
chrome?
Yes, I do, and as you explain, this is expected.
Is that tiny thing
On Sun, Jul 20, 2014 at 11:58:00PM +0900, Carsten Haitzler wrote:
I have built in haswell intel drivers, I expect they're basic.
If I were running nvidia, then my battery life would be much worse.
fyi - nvidia support buffer_age in GLX, last i looked intel don't, so nvidia
are actually far
On Sat, Jul 26, 2014 at 11:55:27PM +0900, Carsten Haitzler wrote:
e17 just thrw a few dumb large textures (big triangle pairs to make rects).
e18
+ throws much more geometry at gl. all the text in e (titlebars, menus, shelf)
is renderd as text. it uses less memory and is actually far more
On Tue, Jul 29, 2014 at 08:53:05AM +0900, Carsten Haitzler wrote:
I understand that, but would it make sense to have an e config option
for less bling, more battery that one could switch to by sending a
command from e from ACPI?
i'm sorry - but no. it's like asking bmw could i have a
On Tue, Jul 29, 2014 at 04:43:50PM +0900, Carsten Haitzler wrote:
If I'm not getting it, and just wishful thinking, tell me and I'll go
away :)
there is a framerate slider - u can slide that down. advanced - performance
Sorry, which menu is that in?
I went to Composite settings, and can't
(moving this back to the list)
Raster, is it possible that your patch breaks Multi except in e and
terminology?
Since I upgraded to the newer e18, Multi doesn't work anywhere except in efl
apps it seems (see below)
On Sat, Aug 02, 2014 at 06:55:32PM -0400, John Holland wrote:
In some kind of
On Mon, Aug 04, 2014 at 07:29:59AM +0900, Carsten Haitzler wrote:
ok some numbers - this is intel driver, gl, with partial rendering enabled and
1 window with a spinny busy animation:
http://www.enlightenment.org/ss/e-53d89ef1d9efe3.65777916.png
5% cpu with 1 window having a busy
On Mon, Aug 04, 2014 at 09:02:16AM +0900, Carsten Haitzler wrote:
Since I upgraded to the newer e18, Multi doesn't work anywhere except in efl
apps it seems (see below)
multi key compose? no - it works. i use it regularly. as i said - i spent a
lot
Yes. It now works only in E and
On Mon, Aug 04, 2014 at 11:13:39AM +0900, Carsten Haitzler wrote:
xmodmap creates a conflict of modifier maps with your setup. phab ticket has
an
explanation - as does the git commit log.
I re-read it an I think I understand it better now.
Basically it seems that you cannot assign mode_switch
I have enlightenment 0.18.8-1 deb nicely built by John Holland and it starts
each time with
Compositor Warning: your display driver does not support opengl or no opengl
engines were compiled in or installed for Evas or Ecore-Evas. Failing back
to software engine.
Is there a way to find out if
On Thu, Dec 11, 2014 at 09:38:11AM +0900, Carsten Haitzler wrote:
Compositor Warning: your display driver does not support opengl or no opengl
engines were compiled in or installed for Evas or Ecore-Evas. Failing back
to software engine.
you get this when the evas gl engine can't init.
On Fri, Dec 12, 2014 at 06:09:15AM -0500, John Holland wrote:
How do I check that I have hardware compositing on ? I could check that and
turn it on if it isn't already. I don't get an error when I start e.
Try Menu/Settings/Composite, switch from General to Rendering, and
switch engine.
I'm currently using this
https://launchpad.net/ubuntu/trusty/+package/e17
and I think it was either built wrong or is buggy.
I have no shelves, if I go to extension/shelves
configured shelves for display :0 is nothing
I click add
it gives me a popup with shelf #1 and I can't change the name
if I
Howdy,
I just updated to e19 from sparkylinux which provides an up to date build,
and I'm trying to set things back up.
Starting systray fails with:
Bus name: org.kde.StatusNotifierWatcher already in use, getting data via dbus.
org.freedesktop.DBus.Error.UnknownInterface Interface not found.
On Thu, Apr 30, 2015 at 03:41:55PM +0900, Carsten Haitzler wrote:
once you realize just how much it's doing... you begin to go wow - it manages
to cope with all that that well? WOW! :) on the long-term is to make a lot of
this vertex generation threaded so we'd still soak up cpu - but async.
On Fri, May 01, 2015 at 12:00:43PM +0900, Carsten Haitzler wrote:
One other things I was thinking about. I have 3 virtual screens. With the
snapshotting pager, it has to render my 2 other screens to put them in the
pager. Without it, it doesn't have to render the 2 non visible screens,
On Thu, Apr 30, 2015 at 06:45:44AM +0900, Carsten Haitzler wrote:
On Wed, 29 Apr 2015 07:58:02 -0700 Marc MERLIN marc_...@merlins.org said:
thats not a tight loop - it's asleep for 0.016 seconds... or so - that's 60hz
refresh. that is the vsync event (and it's ONLY turned on when
rendering
On Thu, Apr 30, 2015 at 08:58:51AM +0900, Carsten Haitzler wrote:
1. something updating (window? a gadget? some animation).
So I think I found the problem. When I have mplayer running, e19 goes into
that mode.
that'd do it. no updates - e will be idle.
Is it just the pager though?
On Sun, Apr 26, 2015 at 12:43:49PM -0700, Marc MERLIN wrote:
Howdy,
I just updated to e19 from sparkylinux which provides an up to date build,
and I'm trying to set things back up.
Starting systray fails with:
Bus name: org.kde.StatusNotifierWatcher already in use, getting data via dbus
On Thu, Apr 30, 2015 at 10:03:59AM +0900, Carsten Haitzler wrote:
mplayer is updating something - eg it's window. if its window update e HAs to
composite the window - mplayer may talk directly to gpu to render window
content, but once rendered, you will never SEE the content unless the
On Thu, Apr 30, 2015 at 11:47:24AM +1000, Daniel Kasak wrote:
The Connection Manager module is a good replacement for the NetworkManager
applet thing. I believe Xembed support has been removed from Enlightenment
for quite a while now. I think if you can get the NetworkManager applet
built with
Since I upgraded to e19, and had to start over with a config built from
scratch, it's using 20-30% CPU or so:
PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND
27929 merlin22 2 1245m 160m 49m S 31.8 1.0 463:32.66 enlightenment
27701 root 20 0 1272m 231m 218m S
On Thu, May 28, 2015 at 09:12:13AM -0700, Marc MERLIN wrote:
On Thu, May 28, 2015 at 12:43:55PM +0900, Carsten Haitzler wrote:
On Wed, 27 May 2015 15:14:42 -0700 Marc MERLIN marc_...@merlins.org said:
On Sun, May 24, 2015 at 11:38:23AM -0700, Marc MERLIN wrote:
Sometimes, I resume
On Thu, May 28, 2015 at 12:43:55PM +0900, Carsten Haitzler wrote:
On Wed, 27 May 2015 15:14:42 -0700 Marc MERLIN marc_...@merlins.org said:
On Sun, May 24, 2015 at 11:38:23AM -0700, Marc MERLIN wrote:
Sometimes, I resume from sleep and all my windows end up perfectly
centered
On Thu, May 28, 2015 at 11:58:09PM +0200, jls legalize wrote:
https://launchpad.net/~enlightenment-git/+archive/ubuntu/ppa?field.series_filter=trusty
I'm on debian, I know ubuntu packages won't work out of the box, but
maybe I can rebuild the source package.
Currently I have the e19 package from
On Sun, May 24, 2015 at 11:38:23AM -0700, Marc MERLIN wrote:
Sometimes, I resume from sleep and all my windows end up perfectly
centered in the middle of my screen, on top of one another.
This is quite annoying but thankfully doesn't happen every time.
Any idea why I get
On Fri, May 29, 2015 at 08:42:29AM +0900, Carsten Haitzler wrote:
On Thu, 28 May 2015 22:15:18 +0200 Massimo Maiurana maiur...@gmail.com said:
Marc MERLIN ha scritto il 28/05/2015 alle 22:00:
Actually, just to be clear: I have 3 virtual screens, and I just got the
bug again. All my
Sometimes, I resume from sleep and all my windows end up perfectly
centered in the middle of my screen, on top of one another.
This is quite annoying but thankfully doesn't happen every time.
Any idea why I get this, and if there is a fix/workaround?
Thanks,
Marc
--
A mouse is a device used to
On Wed, Jun 24, 2015 at 05:07:16PM -0700, Marc MERLIN wrote:
On Fri, May 29, 2015 at 12:48:17PM -0700, Marc MERLIN wrote:
When this happens, I resume from sleep, xscreensaver is running and the
screen is locked, but I don't see the unlock window.
Instead I see all my X windows
On Fri, Oct 02, 2015 at 11:41:17AM +1000, Daniel Kasak wrote:
> Hi all.
>
> I've built everything according to README.wayland, using the easy_efl.sh
> script. Specifically:
E19 or E20?
In E19, wayland support wasn't working and was removed:
I'm still stuck on enlightenment 0.18.8-2 (debian) and it seems to be
the last version that works with google chrome.
Taking a tab with google chrome and tearing it away from the main app
will (with newer E) cause the tab to get stuck to my mouse and not go
away unless I restart enlightenment to
On Thu, Jan 26, 2017 at 03:17:17PM -0500, Ross Vandegrift wrote:
> On Thu, Jan 26, 2017 at 11:21:22AM -0800, Marc MERLIN wrote:
> > So, is there a newer version with debian packages that is likely to fix
> > my issues, or should I stay put?
>
> Enlightenment 0.21.5 is avai
1 - 100 of 228 matches
Mail list logo