Interesting, why do you shudder over crys reports?
jlc
-Original Message-
From: Schwartz, Jim [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 02, 2002 4:44 PM
To: MS-Exchange Admin Issues
Subject: RE: Report tool?
If you use journaling you have a copy of every e-mail. If you use
I have a few laptops running windows98, and I have to set up the users
up on new ones running 2k, and Office 2k, or maybe XP. The Outlook2k
clients have MANY emails set up. Is there a way to transfer the OL
config to the new boxes, so I don't have to recreate them?
Thx,
jlc
List Charter and
Win2k sp2, Exchange 2k sp3.
Clients cant seem to send mail using IMAP, the smtp connector has not
been modified, its as is from initial setup. There client has use same
auth as incoming mail... checked. Any ideas?
jlc
List Charter and FAQ at:
Lefkovics [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 31, 2002 1:22 PM
To: MS-Exchange Admin Issues
Subject: RE: IMAP clients cant send mail
Were you able to before sp3?
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 31, 2002 10:19 AM
To: MS
Are these clients on site? Can they use their ISP's mail server to
send?
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 31, 2002 10:31 AM
To: MS-Exchange Admin Issues
Subject: RE: IMAP clients cant send mail
/Shameful grin on
I dunno, never had to!
Had
DAMNIT!
Bloody Luser fsck'ed with it, it worky now.
Thanks William!
jlc
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 31, 2002 1:38 PM
To: MS-Exchange Admin Issues
Subject: RE: IMAP clients cant send mail
Using that set up elsewhere, I
Title: Message
I just went through this with PSS less
then a month ago. I ended up making 1 domain.
Many ways to accomplish redundancy, but few hiccup free ways to do it right.
You simply cant fail-over between two boxes and have old, and new mail at both
servers with out creating a
Me thinks your dreaming..
jlc
-Original Message-
From: Kopec, David [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 26, 2002 9:33 AM
To: MS-Exchange Admin Issues
Subject: Anyone heard of this?
Or was it all a dream?.that to install and utilize Exchange 2000 on
a
quad-processor
There are specific KB articles on this
Search, youll see the reg entry for adjusting the binding order etc.
This is always in my experience been a name resolution issue.
jlc
-Original Message-
From: Campbell, Rob
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 25, 2002 8:44
Title: Message
ROTFLMAO
We need to add a footer in here for handful of Qs that get asked almost
weekly.
Sure keep traffic down
He he..
jlc
-Original Message-
From: Andy David
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 25, 2002
12:53 PM
To: MS-Exchange Admin Issues
Mines running about 2-3 from floor...
Just jokes, I am in a good mood. My old partner who screwed me just got
screwed by someone else. I luv it when the wheel turns...
Didn't even have to use the ol' portal me left meself...
Ba!!!
jlc
/rant off
-Original Message-
Trend gots one I think.
There AV for exchange rocks, as a note
jlc
-Original Message-
From: Joe Friess
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 25, 2002 2:49
PM
To: MS-Exchange Admin Issues
Subject: Spam Software for Exch
5.5 NT4.0
Any recommendations for Spam
Title: Message
ROTFLMAO
jlc
-Original Message-
From: Andy David
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 25, 2002 4:11
PM
To: MS-Exchange Admin Issues
Subject: RE: STORE.EXE make my
server die
Dont you mean mm?
-Original
Uhm, logfiles maybe.
jlc
-Original Message-
From: Volf Miroslav [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 22, 2002 7:32 AM
To: MS-Exchange Admin Issues
Subject: RE: ARCserve for Exchange
What's wrong with file level backup? If it is possible to shut down exchange
server, it works
I dont mean to be negative, but I assure you the problem lies somewhere
with you, or your process. I have done countless restores from online
tape, and yet only one from offline file since the tape was not as new.
It works well, and is easy!
Jlc
Ps. What do you do about logfiles?
-Original
Title: Message
I just searched the reg, and exchange dir
for text containing a portion of a blocked email on my system.
Nothing came up. Its obviously stored not as text somewhere, so unless
there is a tool that I dont know about, I would say you are SOL dude.
jlc
-Original
snip
My first guess would be in the metabase.
snip
I looked Tom, I couldn't find it...
Now I wanna know for my own sake, he he...
jlc
List Charter and FAQ at:
http://www.sunbelt-software.com/exchange_list_charter.htm
: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 22, 2002 7:07 PM
To: MS-Exchange Admin Issues
Subject: RE: E2K: Importing Filtered Message List
snip
My first guess would be in the metabase.
snip
I looked Tom, I couldn't find it...
Now I wanna know for my own sake, he he...
jlc
Title: Message
OMG dude, you went there
Jlc
VVVBG
-Original Message-
From: Micheal Espinola Jr
[mailto:[EMAIL PROTECTED]]
Sent: Monday, July 22, 2002 8:26
PM
To: MS-Exchange Admin Issues
Subject: Re: I need feedback
What's a Christian girl like
yourself doing
Message List
Do your worst, Joe. Just do it on a test box.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q232068;
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 22, 2002 7:07 PM
To: MS-Exchange Admin Issues
Subject: RE: E2K: Importing Filtered
Title: Message
OMFG Don, I am actually gonna unblock that
email so I can see this flame thread
HAHAHAAHAH
jlc
-Original Message-
From: Ely, Don
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July
17, 2002 12:25 PM
To: MS-Exchange Admin Issues
Subject: RE: Exchange 5.5 server
You are enabling it, and That shuts the system down? What do you mean,
the services stop for exchange, or what? Sounds like there are some
other problems at hand then what you think.
jlc
-Original Message-
From: Norm Snowden [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 16, 2002 9:03
Title: Message
Jesus, how fast is that?
jlc
-Original Message-
From: Ray Zorz
[mailto:[EMAIL PROTECTED]]
Sent: Monday, July 15, 2002 3:27
PM
To: MS-Exchange Admin Issues
Subject: RE: Backup Server
I have qwest VDSL to the
house. I'm in a new neighborhood that has fiber
Doubletake. I think Sunbelt sells it.
jlc
-Original Message-
From: Naveen Dhankhar [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 08, 2002 12:39 AM
To: MS-Exchange Admin Issues
Subject: RE: synchronizing of two exchnage servers
Hi,
but what would the case if there is problem
AFAIK, this should be simple. Block mail from your domain in the smtp
con.
Internal mail does not use the smtp con...
Not tested, but logically I think it should work. Anyone care to
elaborate?
jlc
-Original Message-
From: Tom.Gray [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 03, 2002
WTF with KB, this really pisses me off to no fricken end, damnit.
I searched for MSExchangeFBPublish, then Event 8213 and got nothing.
So then I searched eventide.net, and nothing useful turned up. Oh well,
guess I don't have the touch...
jlc
-Original Message-
From: William Lefkovics
.
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: 20 May 2002 19:22
To: MS-Exchange Admin Issues
Subject: Search Public Folders
We have a public folder with many sub folders. In OL XP when you try to
check search sub folders, it doesn't let you? How would you conduct
version of Outlook.
Search each folder hierarchy individually.
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 20, 2002 2:22 PM
To: MS-Exchange Admin Issues
Subject: Search Public Folders
We have a public folder with many sub folders. In OL XP when you try
Make the relay use authentication.
Search the kb.
Simple docs there and all over the web.
http://www.slipstick.com
http://www.msexchange.com/pages/faqs.asp
jlc
-Original Message-
From: Nickolaos Fotopoulos [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 20, 2002 4:45 PM
To: MS-Exchange
Is it possible to use an X.400 connector to link two completely
different exchange installs? These are in two non related AD installs
obviously. This is a small non-bizzness related experiment, and I am
having trouble grasping the whole connector thing in relation to this
idea. If this is
Anyone put a exchange box behind this service?
The techies tell me there is absolutely no firewall, or port
restrictions, but I cant connect to ANY smtp server on the net except theirs!
I just spoke with a tier two tech who knew less then tha fricken
list of Q As he has on his sheet of
for this situation?
Roger Wright
Southern Commerce Bank
___
Serving coffee on aircraft causes turbulence.
-Original
Message-
From: Joe L. Casale
[mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 26, 2002 5:13
PM
To: MS-Exchange Admin Issues
Subject: Exchnage
Title: Message
I need
a solution like exchange for one site that has scheduling, and contacts, but no
mail. I wanted to use exchange, but its to admin dependant, this site also doesnt
even have a domain. Any ideas? They all use OL.
jlc
List Charter and FAQ at:
-Exchange Admin Issues
Subject: RE: Exchnage substitue
You want something that
does lots of stuff, but takes no brains to run?
goldmine or Act2000.
-Original
Message-
From: Joe L. Casale
[mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 26, 2002 2:13
PM
To: MS
Title: Message
I know
this has been discussed here before, but again, and I quote XADM: Known
Issues and Fine Turning When You Use the IIS Lockdown Wizard in an Exchange
2000 Environment (Q309677) I have used this tool a few times
again, and although its the latest version, and following
Subject: RE: IISlockdown Again
IMHO, its crap. I have
had one success and three failures with it.
I had to rebuild one box
because it wouldn't let me roll back.
-Original
Message-
From: Joe L. Casale
[mailto:[EMAIL PROTECTED]]
Sent: Saturday, March 23, 2002
5:32 PM
To: MS
User Configuration\Administrative Templates\System\Run only allowed
windows applications
Enjoy
jlc
-Original Message-
From: M2web [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 21, 2002 1:04 PM
To: MS-Exchange Admin Issues
Subject: Software Restriction Policy
We are running Win2K,
You don't have a problem. That is normal behavior, you can set
dependencies, but who cares...
jlc
-Original Message-
From: Chris Norris [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 20, 2002 9:09 AM
To: MS-Exchange Admin Issues
Subject: W3SVC starts before IFS
I have a problem
I saw this behavior in infected systems when the nimda issue was hot.
Check your boxes...
jlc
-Original Message-
From: Paul Armstrong [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 19, 2002 10:36 AM
To: MS-Exchange Admin Issues
Subject: Services terminating unexpectedly!
I keep
Title: Message
ROTFLMAO
jlc
-Original Message-
From: William Lefkovics
[mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 19, 2002
12:35 PM
To: MS-Exchange Admin Issues
Subject: RE: Moving our exchange
5.5 server to DMZ
Consultant's name and
email address please.
' and then wander off?
Simon
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 20 March 2002 4:06 p.m.
To: MS-Exchange Admin Issues
Subject: RE: O O F Replies
You can always say the server is broke, and to fix it, you need about
120 hours OT to fix OOF's
Title: RE: Anyone replicating Exchange across a WAN link?
Me like your boss ;-)
jlc
-Original Message-
From: Zangara, Jim
[mailto:[EMAIL PROTECTED]]
Sent: Monday, March 18, 2002 9:00
PM
To: MS-Exchange Admin Issues
Subject: RE: Anyone replicating
Exchange across a WAN link?
I have used this method in the past with
no worries!
jlc
-Original Message-
From: Mike Zatkalik
[mailto:[EMAIL PROTECTED]]
Sent: Sunday, March 17, 2002 10:43
PM
To: MS-Exchange Admin Issues
Subject: mail-enabled contact...
Sorry guys I know this is a stupid
question, but
: Public Folders
He already indicated that
he wasn't.
I'd be doing more extreme
things like:
reapplying sp's.
reinstalling IIS and Exch
atop itself.
-Original
Message-
From: Joe L. Casale
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002
5
Title: After DC demotion and AD removal, clients can't connect to 5.5 server
Its just a long shot (William, kevin help!)
Do you need to run consistency adjuster now?
jlc
-Original Message-
From: Mike Schmalz
[mailto:[EMAIL PROTECTED]]
Sent: Friday, March 15, 2002 11:52
AM
To:
His emails (ie postmaster etc...) was blocked at my freakin yahoo
account. Plus I emailed his postmaster and told him to fix that POS mail
server...
Jesus, I dunno if OOO's are worse!!!
jlc
-Original Message-
From: Ray Zorz [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 15, 2002 1:19
http://www.eventid.net/display.asp?eventid=1005source=MSExchangeSA
jlc
-Original Message-
From: Bonner, Jon [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 15, 2002 2:22 PM
To: MS-Exchange Admin Issues
Subject: Error after upgrading to E2K from 5.5
We're getting the following error
Exchange doesnt decide, your rule
specifies.
If you mark all email with B_tch and others as adult, then any
email containing say that word is adult. Or you can set rules up such that any email
from domain XXX..com gets turfed
jlc
-Original Message-
From: Garland Mac Neill
Doh!
jlc
-Original Message-
From: Ray Zorz [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002 10:44 AM
To: MS-Exchange Admin Issues
Subject: RE: How can I regain Disk Space
He's a She.
-Original Message-
From: Kevin Miller [mailto:[EMAIL PROTECTED]]
Sent: Thursday,
.
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002 9:50 AM
To: MS-Exchange Admin Issues
Subject: RE: How can I regain Disk Space
Doh!
jlc
-Original Message-
From: Ray Zorz [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002 10
Hey Kev, I haven't worked in 55 for a while(tanks god) but I didn't know
you could segregate a 55 db?
jlc
-Original Message-
From: Thompson, Steve [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002 11:07 AM
To: MS-Exchange Admin Issues
Subject: FW: Defrag in 5.5
Priv is 24 GB
I read in help that opening the smtp virtual server and adding a list of
domains not to allow causes a dns lookup for all messages received. Is
there a better way to block a list of outside domains, and even specific
users? I am not tlkaing about allowing relay, only domain users can use
it, I
just say that out loud?
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002 10:10 AM
To: MS-Exchange Admin Issues
Subject: RE: Defrag in 5.5
Hey Kev, I haven't worked in 55 for a while(tanks god) but I didn't know
you could segregate a 55 db
Yes that will can happen if you inst the disk with a partition on it!
Put in a fresh disk, or a wiped one. Then assign it a letter after
creating the partition. In diskadmin, youll see it is now listed as disk
0, but who cares. I have done this in the past to cure bad situations.
jlc
Subject: RE: How can I regain Disk Space
Thanks Joe, that sounds like the solution.
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002 2:32 PM
To: MS-Exchange Admin Issues
Subject: RE: How can I regain Disk Space
Yes that will can happen if you
I posted the same error a few weeks ago!
I am the same stage, I cant make either
solutions work!
Darn it!
jlc
-Original Message-
From: Ky Nguyen
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002
6:11 PM
To: MS-Exchange Admin Issues
Subject: RE: Public Folders
R u using any of the tools mentioned:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q309508
jlc
-Original Message-
From: Ky Nguyen
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, March
14, 2002 6:18 PM
To: MS-Exchange Admin Issues
Subject: RE: Public Folders
Yes, It
OK, I can access the folders now, but I am getting a perms prom in esm.
Invalid Window Handle
ID no: 80040102
Exchange System Manager
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q270905 says how
to fix.
I am logged in as admin, and it says in explorer, I don't have rights to
Use the consistency adjuster, and remap
the accounts.
jlc
-Original Message-
From: Matina Deen
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 13, 2002
12:02 AM
To: MS-Exchange Admin Issues
Subject: How to extract mail from
a priv.edb file?
Hi all,
I have lost
Subject: RE: MAPI over T1
Hey now, some of us are
still antiquated
-Original Message-
From: Joe L. Casale
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday,
March 06, 2002 7:43 PM
To: MS-Exchange Admin Issues
Subject: RE: MAPI over T1
Not that
I know. don't mean sh_t though, he he
You
Title: Message
Ben, let us know how this works anyway.
Mapi is such a freakin pig, I am curious if the performance is usable myself!
jlc
-Original Message-
From: Benjamin Zachary
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 06, 2002
6:56 PM
To: MS-Exchange Admin Issues
, 2002
7:23 PM
To: MS-Exchange Admin Issues
Subject: RE: MAPI over T1
Yah Im not sure either,
is there any other way to populate the users global address book and public
folders without using MAPI or webmail (ugh!).
-Original
Message-
From: Joe L. Casale
[mailto:[EMAIL PROTECTED
Hehehe,
No prob on the novice dude, but you really need to read up on exchange.
How did you get stuck administering this box?
Those are called transaction logs. Simple in short, they are part of a
disaster recovery and database consistency routine that is very common
in db server type
Oh yea, and I think you mean they are in the format E***.log for
example, not E*.txt.
jlc
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 06, 2002 11:07 PM
To: MS-Exchange Admin Issues
Subject: RE: MDB DATA FOLDER
Hehehe,
No prob
Uhm, I add some perms to the anonymous account in exchange admin for that
folder ;-)
jlc
- Original Message -
From: Walt Brannon [EMAIL PROTECTED]
To: MS-Exchange Admin Issues [EMAIL PROTECTED]
Sent: Friday, March 01, 2002 8:20 PM
Subject: Anonymous OWA Folders
How do you set
I dont think so.
Put the money in RAM. 512 is OK, but not alot!
jlc
- Original Message -
From: Kevan Dickinson [EMAIL PROTECTED]
To: MS-Exchange Admin Issues [EMAIL PROTECTED]
Sent: Wednesday, February 27, 2002 11:28 AM
Subject: Is it worth the extra expense?
We are looking to purchase
Thats a good point!
jlc
- Original Message -
From: Ben Winzenz [EMAIL PROTECTED]
To: MS-Exchange Admin Issues [EMAIL PROTECTED]
Sent: Wednesday, February 27, 2002 11:47 AM
Subject: RE: Is it worth the extra expense?
Take that extra $1300, and invest in a couple more 9gb drives for the
23, 2002 8:58 PM
To: MS-Exchange Admin Issues
Subject: RE: multiple domains on one e2k box
Sure, just pop down the from box in Outlook view and enter the non
primary
from address.
Walt
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 23, 2002 8
, 2002 11:52 AM
To: MS-Exchange Admin Issues
Subject: RE: multiple domains on one e2k box
Depending on your version of outlook it may be in the toolbar
immediately above the TO entry box under options.
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: 24 February
I have a second domain hosted on my e2k box. I added it to the default
recip policy. What I want to know is if the functionality exists, or
there is a better way to set it up so that when user a receives an
email from the non primary address, when they reply that email is used
in the email.
I
and enter the non
primary
from address.
Walt
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 23, 2002 8:48 PM
To: MS-Exchange Admin Issues
Subject: multiple domains on one e2k box
I have a second domain hosted on my e2k box. I added
ETRN, I use it at home for years now...
The bomb. I love Outlook exchange client mode at home.
grin
jlc
-Original Message-
From: David N. Precht [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 16, 2002 11:46 AM
To: MS-Exchange Admin Issues
Subject: RE: Exchange Server in a Cable
I just did a roll out of 7.6, and really like it! Someone said they
think it had a smaller footprint then other av software, and I think so
as well! I really like it. As for exchange these guys are right, I
played with the exchange client, and it blows. Trend/Sybari kick but.
jlc
-Original
On your cd, or in the service pack distro related to your sp level on
your box.
jlc
-Original Message-
From: Herchenbach, Jim [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 12, 2002 12:44 PM
To: MS-Exchange Admin Issues
Subject: Where is exmerge.exe
Where do I find the exmerge.exe
A MS PSS dude told me once while helping me, I just finished helping a
guy restore an exchange server by replaying years of transaction logs on
an empty DB. I would think it could be done then...
How is your backup server integrated into your AD site?
Need some info!
jlc
-Original
mailto:[EMAIL PROTECTED]
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07,
2002 3:48 PM
To: MS-Exchange Admin Issues
Subject: RE: Doing test
restore with transaction logs...
A MS PSS dude told me once
while helping me, I just
I am using the latest version of lockdown. It says its got urlscan
integrated, and the correct settings...
Well, urlscan used to load an isapi filter that I no longer see, and as
for the correct settings, bogus as usual. I had to check the logs every
failure to tweak the settings... But it is all
XFOR: How to Configure the SMTP Connector in Exchange 2000 (Q265293)
HOW TO: Examine Relay Restrictions for Anonymous SMTP Connections and
Filter Unsolicited E-mail Messages (Q313395)
C'mon dude, check the KB first...
jlc
-Original Message-
From: Jonathan K [mailto:[EMAIL PROTECTED]]
Issues
Subject: RE: Open Relay
Thanks Joe for the info. I already had those two articles but I wanted
to make sure there wasn't anything else I needed to do. Something that
MS doesn't cover in their KB.
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Tuesday
Scuse my ignorance, does such a beast exist?
How would you export the pf's (they are small) to a pst w/o using
outlook from the console?
Thanks,
jlc
List Charter and FAQ at:
http://www.sunbelt-software.com/exchange_list_charter.htm
27, 2002 1:16 PM
To: MS-Exchange Admin Issues
Subject: RE: Exmerge for public folders?
I'm pretty sure the standard way to do this is through the mail client.
Why
is that unacceptable?
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Sunday, January 27, 2002 9:35 AM
: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 15, 2002 3:24 PM
To: MS-Exchange Admin Issues
Subject: RE: Transaciton logs in 5.5
Interesting, do you know what technet article?
I am curious to read its explanation.
I still wouldn't do it, but just curious!
jlc
-Original
-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 15, 2002 10:27 PM
To: MS-Exchange Admin Issues
Subject: RE: Transaciton logs in 5.5
I don't know what would happen, but presuming best case scenario, I
would ponder a guess you did loose info and didn't know it, how would
you
Hey, which Giuseppe?
jlc
-Original Message-
From: Milton R Dogg [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 14, 2002 1:29 PM
To: MS-Exchange Admin Issues
Subject: RE: Transaciton logs in 5.5
You turned on Circular logging [1]? Please go strait to the FAQ [8] and
read about
You guys are gonna cause me physical harm.
I almost tipped back in my chair..
ROTFLMAO...
jlc
-Original Message-
From: Martin Blackstone [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 14, 2002 1:43 PM
To: MS-Exchange Admin Issues
Subject: RE: Transaciton logs in 5.5
The very same. He
Kevin, You need a good grammar checker!
HAHAH
jlc
-Original Message-
From: Milton R Dogg [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 14, 2002 2:03 PM
To: MS-Exchange Admin Issues
Subject: RE: Transaciton logs in 5.5
Come on now, don't me in the same line as al gore. That is just
I don't think that's right buddy, they aren't committed until you
backup, then they are flushed. They should be an ntfs partition, a
better solution is to compress a few, then back the darn thing up. If
those logs aren't committed, I don't know wtf would happen if you
removed them and backed up,
HAHAHAHAHAH
jlc
-Original Message-
From: Lefkovics, William [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 14, 2002 8:25 PM
To: MS-Exchange Admin Issues
Subject: RE: Transaciton logs in 5.5
Ya, I was scared reading that.
-Original Message-
From: Joe L. Casale [mailto:[EMAIL
option if
available - easy and relatively safe. Is there anything else on this
volume
which can be moved or compressed?
Cheers,
Marty
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 15, 2002 1:22 PM
To: MS-Exchange Admin Issues
Subject: RE
was the bin files...all the edb files were on different partitions.
Fred
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 09, 2002 5:39 PM
To: MS-Exchange Admin Issues
Subject: ATTN: Fred Valdez RE: Database recovery help
Fred, could you
Can you make a CR with that email, make
the server reject mail, so the sender gets it back?
Hey William
jlc
-Original Message-
From: Lester
[mailto:[EMAIL PROTECTED]]
Sent: Saturday, January 05, 2002
12:54 AM
To: MS-Exchange Admin Issues
Subject: Block out sending mail
Database size, and clustering I do believe!
jlc
-Original Message-
From: aci [mailto:[EMAIL PROTECTED]]
Sent: Saturday, January 05, 2002 4:22 PM
To: MS-Exchange Admin Issues
Subject: Difference Between Exch2K Enterprise and Standard
Do you happen to know what the differences are
Don't know how you would put it on another server, but Compaq has some
very good whitepapers you gain good insight on! My preference for a big
server is to have loggs, and database on different channels, and
different types of Raid. I like this cuz one is typically sequential IO
where as the
No you don't need another server if your user base is small. But then
again, it's a matter of personal pref, and money! I would rather put OWA
its on box, and in-between to firewalls, having my e2k box inside, and
behind a pair of firewalls. Point of failure considerations as well...
jlc
Kev, if you could find these templates I would be greatful!
I set it up by trial and error, failing it, and checking the logs.
But, I am still getting intermittent failures that are being a bitch to
track! I wouldn't mind to see if I actually have it set up right.
Thanks,
jlc
-Original
in
MS
has been mapped to the $. I must say that's a pretty weird mapping.
D
Sacrifice: Your role may be thankless, but if you're willing to give it
your all, you just might bring success to those who outlast you. - -
http://www.despair.com
-Original Message-
From: Joe L. Casale [mailto
You mean services wouldn't start...
You need to read the M$ whitepaper,
http://www.microsoft.com/Exchange/techinfo/administration/55/BackupResto
re.asp.
You need to use isinteg, and eseutil.
If your not well read in this, dude call PSS. They are the bomb!
Its worth it the money!!
Good luck,
jlc
Ya sure Kevin!
I bet your in cahoots with William;-)
HAHAHAHA
jlc
-Original Message-
From: Kevin Miller [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 06, 2001 6:24 PM
To: MS-Exchange Admin Issues
Subject: RE: Circular Logging
That's a bargain..
--
Kevinm M WLKMMAS, UCC+WCA,
. -Desiderius
Erasmus
-Original Message-
From: Joe L. Casale [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 06, 2001 6:08 PM
To: MS-Exchange Admin Issues
Subject: RE: Circular Logging
Ya sure Kevin!
I bet your in cahoots with William;-)
HAHAHAHA
jlc
-Original Message-
From: Kevin
Hey Peoples, does .Netb3 support E2k yet? I was POed when beta 2
didn't;-)
jlc
List Charter and FAQ at:
http://www.sunbelt-software.com/exchange_list_charter.htm
1 - 100 of 118 matches
Mail list logo
