hi Toshiro,
are you shure, which services hosts.allow and hosts.deny are providing ?
the only thing you can do with that entries are :
allow or deny internetservices like ftp or analogical services !
the other reason, this service is NOT designed for accesses like CDROM's
or flopyy or hd's :
if I
All,
Trying to find a way to switch network profiles on the fly with MDK
9.0 I've found a number of them that work at boot time, but since I
don't always know what I'm going to do until after a boot they are for
the most part useless. (Unless I want to do the Windows reboot dance.)
Using the
I'm not sure that XP/2000 meed this (they might though, I think the boot
loader needs to be on C:), but I don't think it would hurt. Windows 9x
needs to be on the C: drive so if windows is on the second drive(hdb or
D: if you prefer) or up, you need to map it down to the C: drive.
The first 2
Todd, I must say you must know a lot!
Sorry, shame on me really, I sign GMX mailing list but simply didn't think
to ask them and I don't know why.
I'll suggest these lines bellow to her and henceforth we'll ask to GMX
guys.
Cheers,
On Fri, 25 Oct 2002, Todd Lyons wrote:
First of all, shame
Hi James,
I'll take a new round-up trying to optimise VNC and see what
happens. Anyway, X -query offers me a very good solution, even to 3D
modelling.
Since I do my experiments at home before implementing at work,
what I got now is good enough to work. However, at home, some
On Sat, 2002-10-26 at 18:36, Jack Coates wrote:
Hi,
I have a machine (naturally a fairly important one) which I built and
which is fairly unstable -- give it ten to twenty days, and it will
suffer a video lock up or a disk error that forces a reboot.
FIC AZ11 with a VIA KT133 chipset.
On Monday 28 October 2002 12:08, Alan Wilter Sousa da Silva wrote:
Hi James,
I'll take a new round-up trying to optimise VNC and see what
happens. Anyway, X -query offers me a very good solution, even to 3D
modelling.
Since I do my experiments at home before implementing at work,
Hi,
I posted a similar msg when using my laptop with multiple profiles,
I use fixed IP now so i dont get the wait problem you have (assuming
that is a dhcp DNS prob).
There were some command line scripts to change the network IP etc etc
or you could just use static IP and change IP with MCC.
Hi Ken,
Re: LICQ
I'm assuming you are not the Ken Thompson who developed linux and C with
Dennis Richie? (I think that was his name)
I gave up on Licq and now use micq.org, its very uptodate, workign with
the v8 OSCAR protocol, runs from any shell so you can use it from any pc
and even works
On Mon, 2002-10-28 at 06:08, Alan Wilter Sousa da Silva wrote:
Since I do my experiments at home before implementing at work,
what I got now is good enough to work. However, at home, some computers
have TV card and we have cable tv just to one. I tried but I couldn't
watch TV via VNC
Yes, I know this option (net streaming?) despite of not trying yet because
I don't think that my PII 300 will be fast enough for the job :-).
Anyway, if I'd try net streaming, from where should I start?
Many thanks,
Cheers,
On Mon, 28 Oct 2002, Steffen Barszus wrote:
I don't believe
Great! I'll try it. I think about sound later. My net is 100mbps, I
hope to be enough.
On 28 Oct 2002, Kwan Lowe wrote:
xawtv has a remote option that streams video over X. It's slow, however,
and getting sound to work was a pain. I wouldn't recommend it for
installations where the network
Hi all.
I recentlly aquired a notebook P III, and tried to install ML 9.0.
Unfortunately, after a smooth install, it refuses to boot, not with
kernel panic, but freeze.
First it was when trying to mount / (root) as REISERFS. I reinstalled
as EXT3, and it corrected this trouble. But then, it
I have Licq installed on my v9 box and all runs just fine.
I did a fresh install of 9 though. What error do you
receive when starting licq from command line?
As far as the Zip internal, I have the same problem.
If you find the answer to that let me know.
I am starting to think it is kernel
hi,
have downloaded that script, but there are some enties I don't have an
idea abot what to write in as there are :
DNS : = what I have to write here ? is it the local DNS, but right now I
don't have a setted up DNS - or is it the DNS of the provider ?
AUTH_ALLOW=207.69.200.132 216.32.132.250
i've just installed openssh-server and when i try to start sshd i get
privilege seperation: user sshd does not exist
before i create this user, what options should i create it with, obviously
it's a system user and doesn't need a home etc. but what else, after all ssh
is a security minded tool,
On Fri, 2002-10-25 at 12:15, Lyvim Xaphir wrote:
Try listening to the following Realplayer link between 12 and 3:00 EST -
rtsp://a271.l582920640.c5829.g.lr.akamaistream.net/live/D/271/5829/v0001/reflector:20640
This is a real good place to start getting informed on the forces at
work
Viable alternatives If I always knew ahead of time what the IP would
be. Problem is that I'm moving a lot to networks where either I don't
know the intended IP structure, or if I did set up once it won't be the
same this time.(customer sites). Right now I've got about 6 profiles in
this laptop
If you do find a solution let me know. Unfortunately this is one of two
drawbacks to any remote solution like this. realtime Video and sound.
The original VNC site talks about the fact that realplayer and similar
products don't work over VNC.
James
On Mon, 2002-10-28 at 04:56, Alan Wilter
On Mon, 2002-10-28 at 05:53, bascule wrote:
i've just installed openssh-server and when i try to start sshd i get
privilege seperation: user sshd does not exist
before i create this user, what options should i create it with, obviously
it's a system user and doesn't need a home etc. but what
FWIW, my 3 Mandrake boxes all have
/etc/group - sshd:x:94:
/etc/passwd - sshd:x:94:94::/home/sshd:/bin/true
/var/empty exists on all 3 and two have /var/empty/sshd (which is empty -
no files).
At 11:08 AM 10/28/02, James Sparenberg wrote:
On Mon, 2002-10-28 at 05:53, bascule wrote:
i've just
I was trying to install the mutella Gnutella client on my mandrake 8.2
machine and got the following when I did a ./configure:
checking for readline/readline.h... no
checking for readline in readline.h... no
checking for readline in readline.h with curses... no
checking for readline in
On Mon, 2002-10-28 at 03:45, Gabriel Phoenix wrote:
snip
Power Supply?
snip
Power supplies should be added to the troubleshooting list when tracking
down gremlins.
Gabriel
I've read that article too, and have had my share of cheapie power
supplies release their magic smoke... The
On Mon, 28 Oct 2002 11:35:49 -0500
logic7 [EMAIL PROTECTED] wrote:
What is this readline library?
The Readline library provides a set of functions for use by applications
that allow users to edit command lines as they are typed in.
For readline.h you will need to install the readline-devel
Nevermind. I just d/l'ed the source from the gnu ftp server. compiled it and
everything is fine.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:expert-owner;linux-mandrake.com]On Behalf Of logic7
Sent: Monday, October 28, 2002 11:36 AM
To: [EMAIL PROTECTED]
Subject: [expert] readline
Hi guys!
I have a new install of Mandrake 9..
I have 2 drives and I am trying to mirror them.
I have my /etc/raidtab set up, but I don't think I have it correct.
1. Are you able to mirror the whole drive? Book record and all?
2. Do I have to have my second disk formatted? Or will it just
When it shuts down what happens if you try to ssh into it. If it's a
No response. Were talkin total lockup here. I have to restart.
web server does it still serve web pages? If it does I'd be inclined to
It is not a webserver.
suspect that perhaps apm or APIC (hope I got the right
Why not just click Do not activate eth0 at boot time (or config it
yourself in the boot up sequence? Then you can do as you wish.
JG
James Sparenberg wrote:
Viable alternatives If I always knew ahead of time what the IP would
be. Problem is that I'm moving a lot to networks where either I
1. Check the disk for scratches, dirt, finger prints etc.
2. Is it not mounting the drive or is it seeing the drive and not
getting the file? You could check to see what files rpmdrake is asking
for and then try installing them from the command line.
hi,
was trying to install DHCP and share
On Monday 28 October 2002 12:59 pm, Belkie, Dan wrote:
Hi guys!
I have a new install of Mandrake 9..
I have 2 drives and I am trying to mirror them.
I have my /etc/raidtab set up, but I don't think I have it correct.
1. Are you able to mirror the whole drive? Book record and all?
2. Do
Jack,
I looked at your PS specs at that link you gave, and then looked at your
system componets you posted. In my opinion, your PS could definitely be
problematic. Usually, the main problem is the power available on the 3.3v and
5v rails. This PS is pretty low (15A and 26A) with 150watt
Hi
I am running Mandrake 9.0 on a PIII 533 MHz machine and a Ausus mother
board with Via chipset.
In the USB Viewer I can se the camera com and go when I turn it on and
off. I have loaded the following modules in the kernel: dc2xx,
usb-storage, usb-uhci and usbcore.
I have tried to acces the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hello,
I bougth an ATI radeon 7000 VE (with the 2 outscreen) last week and I've
got a problem with my XF86 config.
The problem is I have some horizontal lines when I move a window, or I pass
out an hyperlink. I've this problem with a resolution
On Mon, 2002-10-28 at 03:45, Gabriel Phoenix wrote:
snip
Power Supply?
snip
Power supplies should be added to the troubleshooting list when tracking
down gremlins.
Gabriel
I've read that article too, and have had my share of cheapie power
supplies release their
Jack,
Just read some stuff on FIC AZ11 groups search. People there are having the
same problems you do. One guy fixed it by installing a little heatsink fan on
the Northbridge heatsink (most KT133 chipsets do have one, factory
installed). I would suggest taking off the case cover, and blowing a
Hi
I am running Mandrake 9.0 on a PIII 533 MHz machine and a Ausus mother
board with Via chipset.
In the USB Viewer I can se the camera com and go when I turn it on and
off. I have loaded the following modules in the kernel: dc2xx,
usb-storage, usb-uhci and usbcore.
I have tried to acces
Hi,
How do I disable login names on the login screen? I think msec does it. But
I don't want all there features. Is there a config file I can edit?
Regads,
Norman
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Mon, 2002-10-28 at 11:53, Norman Zhang wrote:
Hi,
How do I disable login names on the login screen? I think msec does it. But
I don't want all there features. Is there a config file I can edit?
Regads,
Norman
it's a gdm or kdm thing, depending on which you use.
--
Jack Coates
: How do I disable login names on the login screen? I think
: msec does it. But I don't want all there features. Is there
: a config file I can edit?
:
: it's a gdm or kdm thing, depending on which you use.
I'm using kdm. Which file do I edit? Am I in right folder with
/usr/share/config/kdm/?
On Sun, 2002-10-27 at 10:05, Pierre Fortin wrote:
This is a quick overview of what I ran into after my friends got their
WalMart/Microtel/Mandrake8.2 PC...
[SNIP]
the modem from the mobo and reseat it -- now works... but it has never
connected at a rate faster than 21kb -- will check into
On Monday 28 October 2002 03:02 pm, Norman Zhang wrote:
: How do I disable login names on the login screen? I think
: msec does it. But I don't want all there features. Is there
: a config file I can edit?
:
: it's a gdm or kdm thing, depending on which you use.
I'm using kdm. Which file
At 02:53 PM 10/28/02, Norman Zhang wrote:
Hi,
How do I disable login names on the login screen? I think msec does it. But
I don't want all there features. Is there a config file I can edit?
Regads,
Norman
My recollection is that a right click will bring up a preferences dialog
that allows
I do it through KConfigurationKDESystemLogin Manager
You can do it from there.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:expert-owner;linux-mandrake.com]On Behalf Of David Relson
Sent: Monday, October 28, 2002 3:23 PM
To: [EMAIL PROTECTED]
Subject: Re: [expert] usernames
At
I have a NFS server that has all versions of mandrake that we support.
Each workstation has access to this NFS volume with amd. DHCP is also
running on this server to dole out IP addresses.
I run the following command to re-install or upgrade a machine.
rekickstart mdkversion. For example, to
Norman Zhang grabbed a keyboard and wrote:
: How do I disable login names on the login screen? I think
: msec does it. But I don't want all there features. Is there
: a config file I can edit?
:
: it's a gdm or kdm thing, depending on which you use.
I'm using kdm. Which file do I edit?
On Monday 28 October 2002 01:53 pm, Robert Crawford wrote:
Jack,
I looked at your PS specs at that link you gave, and then looked at your
system componets you posted. In my opinion, your PS could definitely be
problematic.
I agree,,, jack if you keep smokin that stuff we will demand you
Thanks everyone for your help. I found out that you can edit
/usr/share/config/kdm/kdmrc and change ShowUsers=None under [X-*-greeter]
Norman
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Just ordered a 300W and two cooling fans -- now you're saying 350W? Not
sure that I'm following the justification, unless it's rule of thumb.
On Mon, 2002-10-28 at 13:10, ET wrote:
On Monday 28 October 2002 01:53 pm, Robert Crawford wrote:
Jack,
I looked at your PS specs at that link you
Hi
the module dc2xx prohibits gphoto2 to work as it can not get exclusive
rights to the USB device. Does anybody know how i can remove it
permanently. If I do a rmmod dc2xx it goes away, but comes back as soon
as the usb device is turned on
Want to buy your Pack or Services from MandrakeSoft?
On 28 Oct 2002 12:04:02 -0800 Seth Zirin [EMAIL PROTECTED] wrote:
On Sun, 2002-10-27 at 10:05, Pierre Fortin wrote:
This is a quick overview of what I ran into after my friends got
their WalMart/Microtel/Mandrake8.2 PC...
[SNIP]
the modem from the mobo and reseat it -- now works...
On 28 Oct 2002, Jack Coates wrote:
Just ordered a 300W and two cooling fans -- now you're saying 350W? Not
sure that I'm following the justification, unless it's rule of thumb.
Besides the excellent AMd guide that someone has mentioned, you might
also want to check the pcpowerandcooling.com
On 28 Oct 2002 14:26:13 -0600
Jason Guidry [EMAIL PROTECTED] wrote:
Has anyone gotten any version of audacity to work under mdk9.0? It's
complaining about deps I have installed, both in rpm and src form.
It will not build so does not work in 9.0
Use hackaudacity.
Charles
On Mon, Oct 28, 2002 at 17:22 -0500, Pierre Fortin wrote:
Thanks for the info... my friends' house is just up the road in the
sparsely populated SC mountains and in the same exchange; I get
50,666bps here... The x-connect boxes for the lines are just across the
highway from me... I doubt
you can remove the file dc2xx.o in the module tree somewhere in
/lib/modules/ but do a backup of that file first.
Le mar 29/10/2002 à 22:41, Lars Ole Christoffersen a écrit :
Hi
the module dc2xx prohibits gphoto2 to work as it can not get exclusive
rights to the USB device. Does anybody
many thanks.
On Mon, 2002-10-28 at 16:28, Charles A Edwards wrote:
On 28 Oct 2002 14:26:13 -0600
Jason Guidry [EMAIL PROTECTED] wrote:
Has anyone gotten any version of audacity to work under mdk9.0? It's
complaining about deps I have installed, both in rpm and src form.
It
hans privat wrote:
hi,
have downloaded that script, but there are some enties I don't have an
idea abot what to write in as there are :
DNS : = what I have to write here ? is it the local DNS, but right now I
don't have a setted up DNS - or is it the DNS of the provider ?
Your provider. What
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 27 October 2002 11:23 pm, Kiran wrote:
I'm not sure that XP/2000 meed this (they might though, I think the boot
loader needs to be on C:), but I don't think it would hurt. Windows 9x
needs to be on the C: drive so if windows is on the
El lun, 28-10-2002 a las 04:59, hans privat escribió:
hi Toshiro,
are you shure, which services hosts.allow and hosts.deny are providing ?
the only thing you can do with that entries are :
allow or deny internetservices like ftp or analogical services !
Try to put the line below in
El lun, 28-10-2002 a las 04:59, hans privat escribió:
hi Toshiro,
are you shure, which services hosts.allow and hosts.deny are providing ?
the only thing you can do with that entries are :
allow or deny internetservices like ftp or analogical services !
Try to put the line below in
El lun, 28-10-2002 a las 10:53, bascule escribió:
i've just installed openssh-server and when i try to start sshd i get
privilege seperation: user sshd does not exist
before i create this user, what options should i create it with, obviously
it's a system user and doesn't need a home etc. but
Yesterday, I installed ML 9 on a Compaq Presario 1200T notebook with a
Netgear MA401 PCMCIA wireless card. Also, I installed the
linux-wlan-ng-0.1.16-pre4 package. The prism2_cs and p80211 modules get
loaded and the wireless card LED indicates that it sees the AP (steady LED
light) which seems
Hi!
I've posted this msg on the newbie list as they were talking abou UMAX, but no
one could help me wih my Scanner:
It's a Microtek Slim Scan C3 (paralell), the problem is that I've use MCC and
installed the necessary software but signal
This scanner is supposed to be supported by sane
I wanted to mount /dev/fd0 on /mnt/floppy and that was completely
unsuccessful. My /var/log/messages got filled with the messages listed
below.
This is with supermount disabled.
Does anybody know how I can get around this?
Thanks,
Narfi.
Below are my /etc/fstab and a short segment of
One question my install of sshd has the shell as /bin/true while the
solaris instuctions specify /bin/false Anyone know if this will make
any difference?
James
On Mon, 2002-10-28 at 17:12, Toshiro wrote:
El lun, 28-10-2002 a las 10:53, bascule escribió:
i've just installed openssh-server
Brian Parish wrote on Sun, Oct 27, 2002 at 02:49:04PM +1100 :
I have seen this advice before, but it don't work for me. Perhaps you
can tell me where I'm going wrong...
I boot from CD2
I stand corrected. It used to work that way. It doesn't now. It looks
like you need to make the floppy
For me it depends on what the box does. I've got a box that runs 150w
(New VIA EPIA motherboard) and that meats specs for it. For a gammer
350W is the lower end. My main box runs 300w and rarely ever pushes it
hard. (In fact never)
James
On Mon, 2002-10-28 at 13:40, Jack Coates wrote:
h interesting thought...
On Mon, 2002-10-28 at 10:23, J. Grant wrote:
Why not just click Do not activate eth0 at boot time (or config it
yourself in the boot up sequence? Then you can do as you wish.
JG
James Sparenberg wrote:
Viable alternatives If I always knew ahead of time what
Well i this is the 2nd time it has happend to me i
just installed mandrake 9. last night i shutdown my pc
home pc this morning when i opened the pc Xwindows
is not starting ... only command promt comes,
in the place of gui a blank dark gray screen come .
i try to configure it with drakconf but
como me quito de esta lista?
__
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Can jigdo be used to download Mandrake CD's?
If not possible, I guess mounting the iso and rsync'ing it would be ok,
but what have to do then to make the boot sector be there when burning
it again? If a better method can be used, please tell me.
Thanx.
--
Diego Dominguez
I downloaded the tar.bz2 file for qt-x11-free-3.0.6, configured,compiled
and installed it. Works nicely.
One problem. The INSTALL file indicated that I needed to create a
.profile in my user directory and add four lines defining PATH for it's
main directory, libs directory, etc. and then log
On Tue, 2002-10-29 at 01:34, Frank wrote:
I downloaded the tar.bz2 file for qt-x11-free-3.0.6, configured,compiled
and installed it. Works nicely.
One problem. The INSTALL file indicated that I needed to create a
.profile in my user directory and add four lines defining PATH for it's
main
Philip Webb wrote on Sat, Oct 26, 2002 at 01:02:46PM -0400 :
xterm is ok; konsole is the one which creates the flashing status line.
For some reason, konsole shows some of the mutt colors flashing. None
of the other terminals do this, only konsole. It seems to be _some_ of
the
Toshiro wrote on Mon, Oct 28, 2002 at 09:48:08PM -0300 :
/mnt/cdrom failed reason given by server : no right
exportfs -r
Blue skies... Todd
--
MandrakeSoft USA http://www.mandrakesoft.com
Easy things should be easy, and hard things should be possible.
Philip Webb wrote on Sun, Oct 27, 2002 at 02:09:44PM -0500 :
LOCKFILE=$HOME/.lockmail
Only exception here is the LOCKFILE line. I did not have that.
well, actually ... (grin): it doesn't exist!
i just checked for ~/.lockmail there's no such file!
From 'man fetchmail':
Only one
bascule wrote on Mon, Oct 28, 2002 at 01:53:31PM + :
i've just installed openssh-server and when i try to start sshd i get
privilege seperation: user sshd does not exist
before i create this user, what options should i create it with, obviously
it's a system user and doesn't need a home
Ricardo Castanho de Oliveira Freitas wrote:
Hi!
I've posted this msg on the newbie list as they were
talking abou UMAX, but no one could help me wih my Scanner:
It's a Microtek Slim Scan C3 (paralell), the problem is
that I've use MCC and installed the necessary software but
signal
Am Mon, 2002-10-28 um 19.40 schrieb Jim C:
1. Check the disk for scratches, dirt, finger prints etc.
2. Is it not mounting the drive or is it seeing the drive and not
getting the file? You could check to see what files rpmdrake is asking
for and then try installing them from the command
Has anyone gotten any version of audacity to work under mdk9.0? It's
complaining about deps I have installed, both in rpm and src form.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi all,
I need to learn now to vizualize gray scale raw
images .raw, images with no header information in
The Gimp. Adobe and Paintshop pro recognize the
extension .raw and prompt for the dimensions. The Gimp
I cant get it to do this.
I would appreciate some help.
Rob.
80 matches
Mail list logo