If you want to see how linux works with a webcam and camsteam check out
pupcam.beautiegoldens.com Im running this off a laptop. it is the
whelping of puppies from my champion golden retriever.we are now working
on number 4 of 9 that are due
--
Bill Beauchemin
www.billbeau.net
Home
a Compaq dual 400 with 6 20 gig scsi
drives but the fans in this beast are way to loud for around the
puppies. So im stuck running it off my laptop.
On Thu, 2003-07-10 at 12:49, Ronald J. Hall wrote:
On Thursday 10 July 2003 02:23 pm, Bill Beauchemin wrote:
pupcam.beautiegoldens.com
Bill, may
I dont think there ios another site out there that has this. So I made
it the home of the puppy cam. Is there anyway to protect it from someone
else getting the idea and saying the same thing.
On Thu, 2003-07-10 at 15:25, Alan Shoemaker wrote:
Bill Beauchemin wrote:
If you want to see how
Well my bad I just looked it up and there are 56,000 refrences to puppy
cam on Yahoo. Nothing for a live birth though.
On Thu, 2003-07-10 at 15:25, Alan Shoemaker wrote:
Bill Beauchemin wrote:
If you want to see how linux works with a webcam and
camsteam check out pupcam.beautiegoldens.com
. If I check using TOP it shows only 1 processor is running.
When I go and reboot those errors show up again. This is a dual 400MHz
PII machine with 512 Mb of RAM
--
Bill Beauchemin
www.billbeau.net
Home Of
Beau's Bullet
PSCA R/S 29
and
Beautie Goldens
Want to buy your Pack
Yep. The problem isnt that it shows up as 1 cpu using top but that it is
causing one cpu to be disabled and showing as a failure during bootup or
I should say during the POST pahse of the bootup.
On Sat, 2003-04-05 at 06:26, et wrote:
On Saturday 05 April 2003 09:09 am, Bill Beauchemin wrote
connection refused.
Nestat does not show a pop3 listening.
HELP
--
Bill Beauchemin
www.billbeau.net
Home Of
Beau's Bullet
PSCA R/S 29
and
Beautie Goldens
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
. I hope it is
something we all think about before *just* turning on sendmail or postfix.
drjung
--
Bill Beauchemin
www.billbeau.net
Home of Beau's Bullet
and
Beautie Goldens
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
and
just search for the word relay and you'll see 2 or 3 different
methods described for doing mail relaying that you can
activate...but they are inactive by default.
Vox
--
Bill Beauchemin
www.billbeau.net
Home of Beau's Bullet
and
Beautie Goldens
Want to buy your Pack
downloaded my fare share of iso's it's time I paid my
dues.
Maybe after I have my carpal tunnel surgery I can get employed as a
Linux Admin :)
Merry Xmas Mandrake
--
Bill Beauchemin
www.billbeau.net
Home of Beau's Bullet
and
Beautie Goldens
Want to buy your Pack or Services from
Youll have to use tftp to upload the new software.I forget exactly how
to upload the programe and install it but im sure you can find it on the
web.
On Thu, 2002-11-28 at 03:01, Franki wrote:
Hi guys,
have any of you had need to use the cli interface of a dlink router??
I followed the
How did you get KDE to see it as two seperate desktops? Mine sees it as
one desktop spreed over two displays I would like it to be two desktops
on two displays
On Wed, 2002-11-27 at 10:49, ddc_prueba wrote:
No idea about it indeed, but... if you are using NVIDIA, how did you get
it? I only got
Is there a program out there that is like the old war dialers that can
scan for ip's that are up and running. Something where I can put in a
beginning addy and a ending addy and it will scan all the ips for a
response?
Want to buy your Pack or Services from MandrakeSoft?
Go to
I went and applied evry single security patch that mandrake had using
MasndrakeUpdate and remembered I had Snort running. I found a huge
portscan.log file and tooka look to find that the day before my system
was hacked it was portscaned by one ip from Roadrunner. I sent them a
nice email but my
I run my own dns and email so blocking these ip's that are scanning me
are no problem.
On Fri, 2002-11-01 at 11:16, Todd Lyons wrote:
Chad wrote on Fri, Nov 01, 2002 at 01:49:41PM -0500 :
I remember reading an article in Linux Journal or something like that that
explained how to setup snort
Some idiot hacked my system using either the chunked-encoding bug in
Apache or the OpenSSL vulnerability to gain access. He ised a rootkit
called tc6. The file is called tc6b.tgz this kit will send out all your
passwords used on the system hacked.
There is a hidden directory /usr/bin/util that
the apache, openssl, and the modssl patches.
On Thu, 2002-10-31 at 12:13, Vincent Danen wrote:
On Thursday, October 31, 2002, at 12:52 PM, Bill Beauchemin wrote:
Some idiot hacked my system using either the chunked-encoding bug in
Apache or the OpenSSL vulnerability to gain access. He ised
I dont have a problem using ERoaster. I burned MDK 9.0 just fine and
have burned a few audio cd's also.
Bottom line: GUI frontends generally suck!
Absolutely true - all of them that I have tried get it wrong. Every
one!I do not know why Mandrake perseveres or distributes them
If your running your own email server there should be a config for vacation
autoresponders. I know Postfix has that. If your not running your own server
your isp or network admin can do this for you.
On Monday 10 December 2001 18:10, you wrote:
Can anyone give tell me what they use with
Is thewre an easy way like an RPM to upgrade the xserver from 4.01 to 4.10 or
even 4.03? Im using a Mtrox G400 and to use the mga desk to configure the two
heads you must be running 4.03 or newer. Im currently runing 4.01. I tried
following the directions at xfree86.org and downloaded all the
I just setup a new workstation and need to transfer all my mail settings and
emails from my old workstation to the new. What files do I need to transfer
over?
Thanks.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Try looking at Linksys 2 port print server or the HP printservers. Plug them
into the network do some configurations and boom ya got a printer on the
network. Now go and install cups on your linux machines and configure it and
for your windblows install the drivers for the printserver select
monitoring utility gkrellm (http://gkrellm.net)
to watch a graph of the load across my CPU's.
On Wed, 2001-12-05 at 09:45, Bill Beauchemin wrote:
Is there a way to tell if Linux sees both cpu's on a dual cpu mobo and
if they are both being used?
Want to buy your Pack or Services from
Im really having some diffaculties loading MDK 8.0. Here is the system.
ASUS P2B-DS mobo w/1024mb sdram
Two 450MHz Intel PII cpu's
Matrox G400 dual head video card
Intel 10/100 NIC
24X10X40 IDE CD-RW
Seagate ST32171W SCSI UW /dev/sdc
Two Seagate ST34371WC SCSI SCA Drives /dev/sda and
Is there a way to make several hard drives look like one big drive? Something
like spanning over several drives.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
LVM is exactly what I want! Thanks! One thing though whay hasnt someone
written a graphical version like what MDK has for partioning. No big deal I
do enjoy hackin on the keyboard more than most. I miss DOS for that when
admins were admins not mouse clickers.
On Saturday 01 Dec 2001 1:29
Care to give a newbie/novice programmer an insite as to how to do this.
(and you can learn C in about 2 hours anyway ;) )
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Why NetBui? Why not change your winblows machines to tcp/ip? Seems a heck of
alot easier.
On Tuesday 27 November 2001 19:02, you wrote:
I have a small network using netbui, and I would like to make it work in
linux. My wife has to use windows, because she is blind, and so far, no
program
Im curently in the mood to change my entire network because i have a new
computer comming that I bid for all the parts on ebay for. I paid like 603.00
for the following
Asus P2B DS Mother board
dual PII 450Mhz cpu's
Matrox G400 32mb dual head video card
1024 MB Ram
A very nice new case that
Hello All
Now that I have downloaded the corp. server how do I convert from the .iso to
the actual installable files.
Bill
Let The Bodies Hit The Floor
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I user all linksys stuff. I have 2 switched 10/100 hubs the wireless network
access point a laptop using the wireless pcmcia nic. I am also using the
Linksys cable/dsl router for a IDSL line. The piece I am having a hell of a
time with is there 2 port print server. all I get out out of it is
OK I understand why you can overwrite a file but on the reverse side of the
coin. How would an admin write a file to your home directory that the user
could not change or overwrite. As a user one would need write privy's for
there home directory.
Ta Ta
On Friday 26 October 2001 12:45, you
I run a Kodak DC210 Zoom its listed in the Gphoto setup. I have had no
problems with it. I even managed to have it fall off the roof of a car and it
held up. Kinda like a Timex. Takes a lickin and keeps on tickin. LOL
Want to buy your Pack or Services from MandrakeSoft?
Go to
I like neomail also its extremly easy to setup and works like a charm!
On Monday 22 October 2001 08:43, you wrote:
I like this one:
http://neomail.sourceforge.net
orlando
Julio Rodriguez wrote:
Does anyone knows a free web mail for linux ??
Julio RodrÃguez
[EMAIL PROTECTED]
what would adjusting the rmem_default and rmem_max size do for my system?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
That type of key has been artound for a long time. It is used alot in the oem
industry to prevent copying software. We used it to run wafer polishers.
Without the key the system wouldnt work thus preventing copying the software
to run a reverse engineered polisher. We sold to country's that
on
mandrake 8. i have also just installed 2.4.7 and it
went fine.
could you give a snap shot of the 'few lines' you are
referring to? maybe that will give us a clue.
dm
--- Pete Jordan [EMAIL PROTECTED] wrote:
Bill Beauchemin [EMAIL PROTECTED] wrote:
This is nice but i am still unable
How do I mount ther root device to another system and what will this do for
me? I looked at all the logs and the one I want is dmesg. The only problem is
that as soon as it reboots it overwrites it with new data from the good
bootup.
On Thursday 26 July 2001 00:18, you wrote:
if you can
I have looked high and low on how to configure the HP 170X Jetdirect
printserver. Anyone have any ideas on how to configure a print qeue using a
networked printserver with a hp deskjet 500 connected to it. the ip is
66.47.48.52 for the printserver.
Is the IP address hard coded, or just the default? I believe that
I used arp and my print server's MAC address to forcibly set
it's IP address to the one I desired. Then I telneted to it
to complete the confiuration. Even though it's a D-Link, maybe
the HP also has similar features.
I
Ive tried finding the admin software but hp only has it for win 2000 :(
Never used cups before How do i call it up ?
On Monday 23 July 2001 13:23, you wrote:
I have looked high and low on how to configure the HP 170X Jetdirect
printserver. Anyone have any ideas on how to configure a print
Speaking of Linux Administrator. Is there anyway to get a position as an
entry/mid level position as a Linux Admin. I would love a position like that.
On Thursday 19 July 2001 21:57, [EMAIL PROTECTED] wrote:
Well Although i am a Windows NT/2000 Administrator but i have learn quiet a
few
Angus and Robert are right on the money. Run Mandrake as your first linux
experiance and youll never go back to winblows. I started on RH years ago and
stoped because of how hard it was to instal things. I finally tried again
with Mandrake 6.1 and it was great. Load and go preety much. I also
On Sunday 15 July 2001 14:13, you wrote:
On Saturday 14 July 2001 04:08 pm, Bill Beauchemin may or may not have
written:
Well that worked except for one thing I cnat get anything to run. I click
on something like xterm and it wont come up.
Do you get a window manager? Which one do you
The easiest way to setup Bind 8 is let lm8 set it up when you do the install.
once installed use webmin to configure your zone files its very easy. I use
webmin for all my admin jobs it makes life so much easier.
On Sunday 10 June 2001 23:42, you wrote:
I'm trying to set up the Bind DNS
When I try to boot in smp mode my system starts loading the kernel but then
immediatly reboots itself. Im using 2.4.5 as 2.4.3 does the same thing. I get
these errors in my /var/log/kernel/errors file
Jun 5 07:08:56 firebird kernel: PCI: Cannot allocate resource region 0 of
device 00:0e.0
Im running 2.4.3 and need to try an earlier kernel like 2.2.19 because the
newer kernel reboots in smp mode. The problem im having is that when I do a
make bzImage I get this at the end of compiling and it dumps out.
cheecksum.S:231: badly punctuated list in #define
cheecksum.S:237: badly
Im having a strang problem. After installing LM 8.0 it will not boot to smp.
It sets up a linus-smp boot for lilo but when booting it starts to go through
the boot sequence but just reboots the computer. it works fine in
uniproccesor mode. Slakware 7.1 worked fine in smp mode. I cant see
Im having a strang problem. After installing LM 8.0 it will not boot to smp.
It sets up a linus-smp boot for lilo but when booting it starts to go through
the boot sequence but just reboots the computer. it works fine in
uniproccesor mode. Slakware 7.1 worked fine in smp mode. I cant see where
What Happened to the /etc/inetd.conf file in LM8.0? I went to edit it to
install Qpopper after setting up LM8.0 for the first time and no can
find.
Anyone have any sugestions as to where to look for info on how to get this
card to use all its bells and whistles in Linux?
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
Keep in touch with http://mandrakeforum.com:
Subscribe the "[
Is there a way to list all the ip addresses or dns records for a domain or
zone?
Bill Beauchemin
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
. There isnt a driver out for it yet.
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
I need help installing a external SCSI Tape Library. Im using a Exabyte
library and a Adaptec 2940 SCSI card. Whats the procedure for adding this
to an existing server running Mandrake 6.0
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
/installed
during the initial installation). Check out
http://www.mandrakeuser.org/hardware/hremov5.html and the pages it refers to
for more information.
-Original Message-
From: Bill Beauchemin
To: '[EMAIL PROTECTED]'
Sent: 8/9/00 12:26 PM
Subject: [expert] External SCSI Tape Library
How do I get Mandrake to see a exabyte tape library attached to a 2940
scsi card? What is a good free server/client software package to use?
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
work every time, providing a) the "newdir" is set up as the
"home" directory for that user and b) you have FTP enabled.
John
** - End Original Message --- **
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
private IP packets onto the local subnet!
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
Who cares if WINE is an emulator or not. I run Linux to get away from
those crappy Winblows apps that MicroSnot shoves at ya with all there
bugs. Why would I want to go backwards.
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
I can ssh into my box but when I try to ssh out I get
Disconnected; protocol version not supported (Illegal protocol version.).
Any answers as to why?
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
This is mainly for scsi startup. Open the file you should see your scsi
adapter.
On Wed, 8 Mar 2000, Harald Wolf wrote:
Hi,
what for is the line:
initrd=/boot/initrd-2.2.13-7mdk.img
in the lilo.conf file
and what is initrd-2.2.13-7mdk.img
Bill Beauchemin
Sunnyvale MDC Control
On Sun, 5 Mar 2000, John D. Kim wrote:
Make sure you have RTC option enabled and APMD disabled.
On Sun, 5 Mar 2000, Bill Beauchemin wrote:
Yep been there done that.
Im having a bit of a problem trying to compile 2.2.13 for smp. My machine
is a dual 166 ppro w/160m ram on a intel
Oh just ot add I useed 2.2.14 this morning with the same results.
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
Im having a bit of a problem trying to compile 2.2.13 for smp. My machine
is a dual 166 ppro w/160m ram on a intel mother board that has the AIC7870
controller on board. I also am running a Intel EE pro100 nic. The problem
is as soon as it shows both cpu's during startup it crashes.
Bill
there is a module for the 960 but I need the os on before I can
rebuild the kernel...
Bill Beauchemin
Sunnyvale MDC Control Center
GlobalCenter
(a Global Crossing company)
888-541-9888
65 matches
Mail list logo
