Please let me know when you do build the disk (and drivers) for this. My
machine is basically unusable until this happens. I don't understand how M$
can work and install without special drivers!
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Bob [EMAIL PROTECTED] kirjoitti viestissään (lähetysaika Keskiviikko 15 Lokakuu 2003
00:38):
Hello,
I'm trying to load Mandrake on a brand new P4 2.8ghz system using the Intel
D845GVAD2, with two 10K ROM SATA drives. I have an IDE CDROM drive
attached.
What SATA controller?
That board does
for the hard disk. It wants
to know what SCSI module to use. I tried a whole bunch, all to no avail.
Help! I want to install (preferrably 9.0) on this lightning-fast machine! Thanks.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
when it
runs, and I don't have any tape devices (or even a hdc device) in my /dev directory.
The website for this company doesn't seem to be coming up, either. Anyone using one of these? Help!
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Oops Now what's the difference between the two jacks?
About 100 to 1. Mic in gets that much more amplification.
Rob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
--
Bob
problem is only with *my*
email. Web pages print ok for me, and Everything prints
ok for other users on the same box. (Puzzler ! )
Anyone have a clue as to what's happening and how to
correct it?
Much thanks,
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http
Has there been little/no mail on this list today?
If there has been any volume of mail today, would
someone please let me know directly?
TIA
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
desktop. It should
say something like
DISPLAYMANAGER=GDM
or for kdm KDM this sets which dm you use at boot.
Should it be:
DISPLAYMANAGER=GDM
or:
DISPLAYMANAGER=GNOME
or can either be used?
-Bob
_
Tired of spam? Get advanced junk
9.1rc2 is running fine here with an i845PE chipset.
-Bob
From: Octavi Fors [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [expert] Pentium4 motherboards keeping ISA slots
Date: Thu, 13 Mar 2003 10:45:39 +0100 (MET)
Hi,
thanks for all useful coments.
As Charles
The speed performance, disk size, and other advantages of the Dell Inspiron
5100 are worth the price difference. Those advantages would be worth more
than the US$250 price difference to me, but I use my laptop a lot.
-Bob
From: Gonzalo Avaria [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED
The webmin login user name and password have been saved in a browser cookie
on the workstation computer. Delete the cookie.
-admintiger
From: Anne Wilson [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [expert] How to mend a stupid slip?
Date: Sat, 8 Mar 2003
Wilson wrote:
Thanks for the reply. I've checked cookies on Konq, Netscape and
Galeon,
but can't find it. Could you give me any more pointers?
Anne
On Saturday 08 Mar 2003 6:59 pm, Bob Brickey wrote:
The webmin login user name and password have been saved in a browser
cookie
Can previous version kernels be used in 9.0 without problems? In other words, can you
simply install the 8.2 kernel files into a 9.0 box? What about the 2.2.x kernel from
a 8.2 disk? Are there other packages that depend on the kernel that would need to be
brought in?
Bob
Want to buy your
fine with a Mandrake 8.2 install.
This is a real bummer, as I've got two different 9.0 boxes all built and tweaked for
backup servers,
only to find that my big drives won't work with them.
Any fixes, patches, updates that fix this problem?
Bob
P.S. Please CC your reply to me, as I'm
this problem explicitly, please let us
know. If this is something that upgrading to 2.2.7a will fix, then I
would be happy to do it.
How about:
http://us1.samba.org/samba/whatsnew/samba-2.2.7a.html
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
for an update to at least the 9.0 samba packages to fix this problem?
Thanks.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
reply to, from the digest. A real PITA!
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
insight on how to pass these control sequences (^a S , ^a
[Tab], ^a ^c) through either a shell script or via editiing
/etc/screenrc , I would be appreciative.
Bob Sherron
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
]
Why is this? The Apache still seems to work fine, but this message gets sent the
first of every month.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I've noticed this each weekend in my mailbox for root:
error running postrotate script
run-parts: /etc/cron.daily/logrotate exited with return code 1
The syslog.1 and start of the syslog show nothing out of the ordinary. What could be
causing this?
Bob
Want to buy your Pack or Services from
)
[Tue Oct 1 05:12:31 2002] [warn] long lost child came home! (pid 19056)
[Tue Oct 1 05:12:32 2002] [notice] SIGUSR1 received. Doing graceful restart
This was repeated several times. (Yes, I know, this version needs to be updated...
working on it!)
Bob
Want to buy your Pack or Services
Hello,
I've noticed on my last few installs of Mandrake 8.2, that I get a tiny bit of hard
disk access, once every 4 seconds or so. I've looked in the logs, and I don't see
anything out of the ordinary, and there is nothing going on. What would explain this?
Bob
Want to buy your Pack
? I need connectivity to Win2k workstations. Ideas?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
served from a database server;
each windows client uses its
odbc to serve it to the client.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Wow, this is really sad news. ORBZ, the open mail relay checking system, is shutting
down.
http://derf.cc/orbz_shutdown.txt
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
a rpm -ihv of the
package, it installed, but gave
some DB2 error. The telnet client seems to work ok.
That is all so far.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
Is there any module available for the Adaptec 2903 SCSI card? Thanks.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
Messing around with Mandrake 8.2 beta 2.. I still can't find hdparm. What package
contains this program?
Also, is this the appropriate place to submit bug reports?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
I just recently added a SCSI tape backup to my Mandrake 7.1 system. I used an Adaptec
2903 PCI card.
What do I need to do in order to be able to access the tape drive? I tried messing
with various programs, but no go.
Thanks.
Bob
Want to buy your Pack or Services from
RPM has a given file...
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
ANywhere Host.
THanks.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi Gang,
Can I (easily) use a Travan 4 or 5 IDE tape drive with Mandrake? Any difference
between IDE and SCSI?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
.
It happens with gnome-PPP as well.
Try eznet- http://www.hwaci.com/sw/eznet/eznet.html
set debug=yes if you still have trouble, and then check the log.
It worked instantly for me, where gnome-PPP failed.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http
Try using smbpasswd -a username to add the user to the smb users.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
QV2000. It worked immediately, with
no changes.
I assume you have a 2.4 -series kernel? (I don't think it works with the
2.2)
Mine is 2.4.3 from the Mandrake 8.0 distro, FWIW.
That's about all I can tell you
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http
tried different HDs, different motherboards, different everything... same
problem. Using the 2.2.15-4mdk kernel, everything works perfectly.
Looks like once again, this security upgrade is not ready for prime time.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http
it as a drive. Also, it doesn't matter whether the card is smartmedia or
compactflash - I have used the same method with both types.
Bob
I use a FujiFilm FinePix 1300 (USB). It's never in any of the lists of
cameras in things like gphoto or KDE's camera control center tool that
I've seen
that the file already exits when I try to
symlink. Have I done too many drugs? Am I missing something
fundamental here? How can I get /dev/cdrom to point to the cdrom?
TIA
Bob
--
|Bob Torres, PhD Candidate, Development Sociology, Cornell University
in the pppd options file? I did do the asyncmap 0.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
(Masq) sometimes quite heavily.
Ideas???
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Check your errorlog for httpd. In mine, the problem was bad (changed) permissions for
/var/log/httpd.
Bob
Crap, I got this just after I did it...
now i can't get it working and can't even seem to get the old ones working
again either...
what a pain in the ass...
I am at a complete
not give me any option about which version
to install; so -
1. why did it install the older version?
2. should I upgrade X? - and, if so, what is the recommended procedure?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello Gang,
With all the messages about problems with the latest Apache upgrade, I'm a little
leary of installing it. Were there any significant security
holes in 1.3.12 or 1.3.14?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
.
What happened to him? His site was down for a while, and the last time I was up
there, I didn't see any of the apache stuff.
So I take it then that php4 isn't doable for Mandrake 7.1??
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
How many have you had? According to my logs, as of right now, I've got
897. (This would be a fun competition!
I've got 10700 so far!
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
are right. When I plug in the camera I do -
cat /proc/scsi/scsi
and the output shows the camera ID
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
On Tue, 14 Aug 2001 01:04:59 -0500
J. C. Woods [EMAIL PROTECTED] wrote:
Bob, what do you mean by made a node at the mount point?
Mount point is specified in fstab. I used mnt/camera - so 'mkdir
/mnt/camera'
If the node does not exist there is no place to mount it!
Bob
Want to buy your
it. Someone PLEASE fix it!
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
as the
size of the preview window is reduced by the space taken up by the MIME
part selection panel. This makes reading the list much less convenient.
I too wish this small advertisment could be sent as a simple signature.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http
in the camera, switch it on, and then do a 'mount /mnt/camera' ,
and I can then read the CF card just like a disk drive, and copy the files
I want. It's really slick - and fast.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
resized a Ext2 partition by moving its beginning
sector, to make it larger, and there were no problems at all.
I hated booting windoze to do this, but experience has led me to trust PM
and I wanted to avoid problems, having no backup.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go
), with
'alsamixer -m1'. If I select the CD channel, hit M to unmute, and then
raise all the levels, CD's play just fine. After a restart this step has
to be performed again.
Bob
, indeed. Go to www.mailops.com and sign up for a free account, and
you will have access to news.mailops.com for both reading and posting.
It's a decent server with almost 50,000 groups, good retention and fairly
fast.
Bob
was). You will
need to use a mixer to raise the level.
Bob
No Message Collected
I have several Mandrake 7.1 firewall systems running on 486 processors with no
problems. I say give it a shot!
Bob
486
processors are not running on any current version of Mandrake,
to my knowledge.
to be handled differently?
How can I explain this to my DSL ISP so that they won't dismiss the problem as a
Weird configuration on the user end?
Bob
P.S. the IP address in question is: 64.65.206.24
, should I
have to do all this work, trying to figure all the IP addresses of my
DSL ISP just to make their networks work? It seems like there must be
another way.
Bob
]*
* the exception is not written up anywhere that I know of; but I did discover it
circa 1989.
Really? If that indeed is the case, then how do people that have multiple providers
handle
this situation?
Bob
sent thru netY to netX, aren't we
talking about two entirely different packets? Or are reply packets somehow
tied to their request packet, sort of like what IP MASQing does?
Bob
that hit my eye. Any ideas?
Bob
fairly basic - no RIP, etc. So I need RIP? Some IPCHAINS rules?
It just seems to bizzare that the reply packets would go through the other
network card. HELP!!
Bob
, then dies. I get an error in my apache log giving some error
reference in Apache. I have to tell my FP2000 people NOT to use publish, sigh.
Bob
necessary to check, you can actually boot
and run on a corrupted system (for a little while, anyway).
Am I correct in understanding from your comment, Civilme, that this issue does NOT
affect 2.2.15 kernels?
Are WD drives not good for running under Linux?
Bob
with gcc-2.95.2, all other software
are proper levels. Kernel builds fine, just doesnt boot. Like I
said,
when this was a RH6.2 box it loaded a 2.4 kernel
fine with the promise card. Thanks for any assitance you can
provide.
Bob Silva
bob @bravenet.com
without response.
Cheers
--
Bob Parker
, even the latest 7.2 distro!
We need an updated RPM!
Bob
] [notice] child pid 23228 exit signal Aborted (6)
Any ideas how this can be fixed?
Bob
P.S. please CC your replies directly to me.
. Users there are draining all my bandwidth.
How can I impose a limit? Like 256k up and downstreams?
Networks are currently 10-base-T.
Bob
to the internet.
How do I do this??!
Bob
"test=off" or "test=something else". I don't want anything else in the
file modified - stuff before or after this line.
How do I do it?
Bob
Would someone PLEASE fix the REPLY-TO address for the digest of this list?! Replies
get sent to "expert-request", which then fail.
Bob
Brian Hartman wrote:
On Sunday 07 January 2001 11:02 am, you wrote:
Specifically mod-utils . . . and what else? According to the following
URL: http://home.tampabay.rr.com/jandr/Mandrake.htm
That is all which is needed. What other updated packages are necessary? I
am also have the
the
updates and fixes? I'd do it if someone can point me to a utility that can accomplish
this.
What I'm basically asking for is a 7.1 "second edition" for those who don't want to be
on the bleeding edge.
Thanks.
Bob
P.S. This list's REPLY-TO address is messed up.
Hmm, I've been using Webmin all this time without SSL,
and I can't seem to make it work WITH ssl... I have to
use http://localhost:1 to connect. How do I enable
SSL for Webmin?
Bob
the netware server for a Linux box?
Thanks. Please CC your replies directly to me.
Bob
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
How do you get Mandrake to auto adjust for Daylight Savings Time?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
my hostname?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
onfig file
that is messed or missing somewhere. Where can I look?
This is pretty much a stock install from a 7.1 disk (on a 486 system).
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
burning software, and can make a disk from a folder, but the
bootable part gets a bit tricky..
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
in the FIND command, but it didn't
work.
Thanks.
Bob
P.S. Please CC messages directly to me also: [EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
virtual.backup
-rw-r--r--1 root root20480 Dec 1 15:18 virtual.db
As you can see, sender_access is dated in November, and has an identical time/date
stamp as sender_access.db, which wasn't picked up. Header_checks is the file I
expected it to return.
She no be workie!
Bob
Please CC
ilto:[EMAIL PROTECTED]
THanks!
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
DO this: change your NetZero password (in the Windows program) to: "abcde". Now your
encrypted password you need for Dial up networking will be: "0a1" (that's number
0, five a's, and number 1)
have fun!
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]"
ceive data on the interface (using the
same box right now to send this email) when the nic is
set for PROTOCOL="none", so I know data is ok.
What is going on?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
say I should specify "/etc/ftponly", but alas, this doesn't work. THe log
files simply say "failed login". Any ideas?
Using MDK 7-1, wu-ftp version 2.6.0.
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
, in my book.
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
, the default behavior is to
put the files in: /tmp/test.com/home/yo/files/.
But why doesn't copydir and mirrordir work? If they are so badly broken, they
shouldn't be included in the distribution.
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
ing create directory: /tmp/test/user/_vti_cnf: File exists
(Of course it exists, it just went there a few files ago and created it!)
Is it me, or is this sucker really broken??
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
something from the source URL!
I just went to the cooker and downloaded and installed the latest mirrordir rpm, and
it does the exact same thing.
What's going on? Is there another program that I can use that would do the same thing?
Bob
Keep in touch with http://mandrakeforum.com:
partitions, and it would not work.
What did I do wrong?
And more importantly, how do I turn off Postfix's creating additional log files in
/var/log/mail/???
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
that will work with my
version of Apache?
Also, are there any howtos that explain how to create site certificates and make this
whole thing work?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
I had the same problem getting Sympa to work. Mandrake 7.1 didn't come with the
DBfile perl module. I did manage to find it and get it installed, but boy, this
should have been packaged with the Sympa RPM!!!
I think you can get it from CPAN. Do a GET DB_File
Bob
On Thu, 2 Nov 2000, bill
n? I have customers from another service that is running an older
version of Linux that seems to do this. Is this an Apache thing? I am running the
1.3.12 Advanced Extranet.
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
he machine. I want this to be customized to the customer's
virtual host name, also to keep bogus requests from being mailed back to me (root).
What is the proper syntax to call sendmail (or mail) with to set the From: address?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe t
a very simple thing - how do I do it?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Can we please knock it off with the PGP messages? THose of us on
Digests have a hard enough time, and this just makes it worse. Thanks.
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
it needs to do.
Example output:
http://1.2.3.4/test
With the remote address being 1.2.3.4. This file should be saved to
/home/httpd/html/test.html
Thanks!
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
this major problem before. Might I have some config set wrong?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
be checking out the Mandrake RPM for
Frontpage - hopefully that will work!
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
1 - 100 of 175 matches
Mail list logo
