__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
, and this is not being
logged, maybe I need to use a proxy, but I can change the lan to all
policy to accept instead of reject and it works, so I guess I'll go that
route.
Thanks,
Dan
On Thu, 2003-11-13 at 17:50, Richard Bown wrote:
Ok, go thru the config files for mnf and set to log everything, its
Hi has anyone managed to do a urpmi.addmeadia for the club contrib.
no problems adding others but this one always fails, just as if there is
nothing there ??
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
the hdlist.cz?
Clement.
Le Jeudi 13 Novembre 2003 11:06, Richard Bown a écrit :
Hi has anyone managed to do a urpmi.addmeadia for the club contrib.
no problems adding others but this one always fails, just as if there is
nothing there ??
TIA
Richard
to connect to
Live365.com mp3 servers.
Thanks,
Dan
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from
at 21:25, Daniel Anderson wrote:
On Thu, 2003-11-13 at 15:02, Richard Bown wrote:
dunno , but you could try tail -f on your firewall logfile and try to
connect to live 365, if its rejecting or dropping you should see which
port its trying to use.
HTH
Richard
On Thu, 2003-11-13 at 19:34
- Release Date: 31/10/2003
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
at /dev/dsp or /dev/audio or
/dev/adsp ???
Some advice if anyone else is using this card
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
mode.
the other machines went from 2.4.22-10 to 2.4.22-21 and all is normal
with them.
Just a bit strange thats all, it dos'nt effect the operation of this
machine, just curious as to why.
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
read-only
strange that !
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
at 18:28, antonovich wrote:
Richard Bown wrote:
Whoops, ignorance is bliss, did'nt read the errata just made one today
from MCC, and it booted OK.
Did I miss something
Richard
On Sun, 2003-11-02 at 22:25, sionii wrote:
What kernel have you got installed? 2.4.22-10mdk? previous ones
amount from aol.com.
At the moment all mail from [EMAIL PROTECTED] goes straight in the bin, not an
ideal situation ( but I suppose any user that chooses an anti linux isp
is not liable to send mail to me)
any ideas what to use for a subject filter for that ??
TIA
Richard
--
Richard Bown [EMAIL
Thanks I'll have a look at that one
Richard
On Mon, 2003-11-03 at 14:35, Robert Goshko wrote:
Richard Bown wrote:
HI
been watching the thread on kmail, has anyone successfully got the
filters in evolution to work on the message body.
the filters work well on sender, recipient, subject
.
! mobo to stay clear off
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Sun, 2003-11-02 at 19:15, Greg Meyer wrote:
On Sunday 02 November 2003 01:01 pm, Richard Bown wrote:
Hi
got 9.2 on that thing at last, noapic and acpi=off ( OK Greg :) )
Hey, hey, great news!! Thanks for sticking with it, your friend won't be
sorry. Don't forget to send Tom
On Sun, 2003-11-02 at 21:40, Todd Lyons wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Richard Bown wanted us to know:
I really must disagree with you on this Greg, if this was so , how come
I can move a drive thats had winxp, into a machine thats happily running
linux and get
of data are allocated to the mbr ?
is it the same for all OS's ?
what would happen if one OS used a very slightly different size mbr ?
I dont know, but some one on this list should
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
load is disastrous.
any ideas how I can get that crap off the mbr so I can load mdk 9.2 ???.
I also think Mandrake needs to combat this ..
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Sat, 2003-11-01 at 19:20, Greg Meyer wrote:
On Saturday 01 November 2003 01:58 pm, Richard Bown wrote:
So went to load MDK 9.2 on it, starts up finds both HD's but fails to
get an interrupt response and says protection level = 1.
So disconnect the first HD and swap over the cables so
On Sat, 2003-11-01 at 19:11, James Sparenberg wrote:
On Sat, 2003-11-01 at 10:58, Richard Bown wrote:
Hi all
Run up against winxp again, I'm sure they are playing foul.
My friend recently had his PC stolen after all the hard work getting
everything sorted.
So he has his new machine
table.
Now that was before micryuk started using ntfs (apart from NT).
Guess what xp reported that drive as ntfs and not fat
Richard
On Star Date Saturday 01 November 2003 11:11 am, James Sparenberg sent this
sub-space message.
On Sat, 2003-11-01 at 10:58, Richard Bown wrote:
Hi all
On Sat, 2003-11-01 at 23:17, Greg Meyer wrote:
On Saturday 01 November 2003 05:42 pm, Richard Bown wrote:
On Sat, 2003-11-01 at 19:20, Greg Meyer wrote:
This is not the first time I've had major probs installing MDK after
winxp has been on a HD..
Problem has nothing to do
in /etc/services
HTH
Richard
On Thu, 2003-10-30 at 20:21, Albert Whale wrote:
Does anyone have a simple approach to forward the 443 port to an
internal machine?
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
.
Unfortunately some of them have a cable modem server that
has capped the ports under 1024, so I don't know how to
access to their computers using ssh, that uses port 22.
Does anyone know how to connect via ssh using ports over
the 1024?.
Thanks so much in advance, regards.
--
Richard Bown [EMAIL
Burning Programs
support it?
Rob
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
the bug fix you have to hose the toolbar, and
with the bug fix you can keep your toolbar, but the menus get hosed.
Has anyone seen this before I raise a bug report on the bug fix ?
Any quick way of rebuilding the menus in gnome ??
TIA Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your
as long as the text is name / artist or something like that its can be
entered in the ripping submenu of setup
HTH
On Sat, 2003-10-25 at 15:59, Rob Blomquist wrote:
On Saturday 25 October 2003 02:33, Richard Bown wrote:
k3b supports this
Well then how do I pass the data?
--
Richard Bown
-
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
G8JVM
On Fri, 2003-10-24 at 11:27, KevinO wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Richard Bown wrote:
Time to stick my oar in !
A few facts as satellite coms are above 1 GHz, there will be no effect
on them
In a large solar event that was pointing directly 'at' us
think although interesting this subject has run its course
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
not happy with this solution ,its mucky and dos'nt solve why a prog
would compile on a machine running 9.1 and be a pig on 9.2
BTW 9.2 dos'nt down load the upgrades on install
Richard
On Fri, 2003-10-24 at 18:16, Bill Mullen wrote:
On Thu, 23 Oct 2003, Richard Bown wrote:
back again,sorted
/gnome-config
checking for xmlNewDoc in -lxml... no
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
in -lSM... yes
checking X11/SM/SMlib.h usability... yes
checking X11/SM/SMlib.h presence... yes
checking for X11/SM/SMlib.h... yes
checking for XpmFreeXpmImage in -lXpm... yes
checking for gnome-config... (cached) /usr/bin/gnome-config
checking for xmlNewDoc in -lxml... no
--
Richard Bown [EMAIL
be provided by libxml-devel (or however mandrake names it, ie,
libxml0-devel, libxml2-devel, etc...just do an rpm -qa|grep libxml and see
what is already installed and then do a urpmi for libxmlwhatever-devel).
praedor
On Thursday 23 October 2003 03:34 pm, Richard Bown wrote:
Sorry
MESSAGE-
Hash: SHA1
For that produce the last portion of the config.log file contents.
praedor
On Thursday 23 October 2003 11:49 am, Charles A Edwards wrote:
On Thu, 23 Oct 2003 21:34:34 +0100
Richard Bown [EMAIL PROTECTED] wrote:
can someone please point me in the right
, that *was* the motion, right? where's the minutes...
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
-10-21 at 04:11, James Sparenberg wrote:
On Mon, 2003-10-20 at 06:11, Richard Bown wrote:
I upgraded from 9.1 to 9.2 the same as the vast majority will do.
If you print from 1.4 on a 9.1 system you get the same stupid font, and
only able to type about 4 words before forcing on to a new line
/lDNNaKr9sJYeTxgRAhyzAKCIc8uPHc2SYTJ76UGllIaQi5kxjQCeIBNp
bJr/ab7knGahjAwrDNtnAWs=
=u09d
-END PGP SIGNATURE-
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL
On Tue, 2003-10-21 at 04:14, James Sparenberg wrote:
On Mon, 2003-10-20 at 15:02, Richard Bown wrote:
Hi
this is minor but damn annoying
After trying to print a jpeg from gimp-1.2.5-6mdk to an Epson C82
printer using CUPS, instead of a nice piccy of a swiss steam engine I
got
1
**: cannot open display: :0.0
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi all
the kernel src 2.4.22.-10 mdk can any one tell me if the module
svgalib_helper is supplied with the mdk src, as I need it :(
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Need kicking for this one
looks like I messed with the permissions when compiling an app...
works OK with root access.
Richard
On Tue, 2003-10-21 at 19:53, Richard Bown wrote:
Hi,
using the mdk Gtk packages and on a couple of apps I'm trying to get
going I see this error message.
Can
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
the PC ( VOIP)
This with the problem with WM's , this is not a releasable distro.
The problems are so so visible .
Away from the PC before I burst a blood vessle
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
] CloseClient() 5
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
re: evolution
from my previous mail the version of evolution ver 1.4.4 thats
distributed is BUST. the version on cooker 1.4.4-9 is OK and needs to be
moved to 9.2 upgrades ASAP.
Richard
still miffed
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go
and it is working just fine. BTW this is an
upgrade of 9.2rc2 I am using.
cheers,
Mike
On Mon, 2003-10-20 at 18:48, Richard Bown wrote:
re: evolution
from my previous mail the version of evolution ver 1.4.4 thats
distributed is BUST. the version on cooker 1.4.4-9 is OK and needs to be
moved
in CUPs
and print a test page.working
Thats the first time I've ever seen that..
OK it may be a coincidence that 9.2 is involved as the other factor is
the new kernel 2.4.22
has anyone seen similar ???
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from
On Sat, 2003-10-18 at 18:09, Richard Bown wrote:
Hi , just installed 9.2 well sorta
!st attempt tried the upgrade...looked good, but kept throwing errors
when loading the modules for the network card, tried different cards too
..
2nd attempt,, this time I installed and did'nt format my
-
Hash: SHA1
Richard Bown wanted us to know:
After formating my home partition, and a new install of 9.2 all seems to
well,
Usually it's just the .gnome or .kde directories that needed to be
wiped, or the config dir for a specific application.
I hav'nt found yet whether or not I still
Richard
On Sun, 2003-10-19 at 22:42, James Sparenberg wrote:
On Sun, 2003-10-19 at 12:08, Richard Bown wrote:
Hi
There is definitely a problem when upgrading 9.1 to 9.2 when gnome is
the wm
unfortunately you have to lose the .gnome* files in your home
directory. I noticed this as well
Hi
would any tcl/tk guru be willing to help me off line with just 1 line
of code,
thanks
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
its now reinstall after ftping files to another machine and hope
lightning wont strike twice in the same place.The MD5 checksums were ok
on the downloads.
Anyone seen similar?.
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
from another machine
on the LAN it times out. But from the 9.1 machine, I can ping
192.168.0.200 (it's NIC ip) .. the routing table sees the ip, but wont
look at the gateway or LAN. .
ANY help would be much appreciated.
Thanks guys.
Brett
--
Richard Bown [EMAIL PROTECTED]
Want to buy
On Thu, 2003-10-16 at 02:29, James Sparenberg wrote:
On Wed, 2003-10-15 at 08:28, Richard Bown wrote:
Hi Greg,
[EMAIL PROTECTED] richard]$ rpm -qa python
python-2.3-3mdk
So yes its there
I can duplicate this on my cooker box if I'm running the bittorrent rpms
from Texstar Since
On Thu, 2003-10-16 at 02:38, James Sparenberg wrote:
On Wed, 2003-10-15 at 12:30, Richard Bown wrote:
On Wed, 2003-10-15 at 19:28, Kwan Lowe wrote:
Trying to compile a DSP package called Linrad,
its for very low level radio sigs that are below noise levels.
It requires svgalib
properly configured would be very
helpful.
When I eventually get these progs all working I will put a mini-howto
on twiki for ham s/w on mdk9.1~2.
Nothing original just correlate all the foul ups I've made and the
easiest way to get certain apps running.
TIA
Richard
--
Richard Bown [EMAIL PROTECTED
ImportError: No module named BitTorrent.download
OK I can download 9.2 on a win98 using win4lin.
I'd prefer to do it properly with a proper OS.
What did I miss ??
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
Hi Greg,
[EMAIL PROTECTED] richard]$ rpm -qa python
python-2.3-3mdk
So yes its there
Richard
On Wed, 2003-10-15 at 15:30, Greg Meyer wrote:
On Wednesday 15 October 2003 08:37 am, Richard Bown wrote:
I'm going nuts !
I've installed bittorrent exactly as per the FAQ on the club pages
... no
checking for ./users_hwaredriver.c... (cached) no
checking how to run the C preprocessor... gcc -E
checking for vga.h... no
configure: error: Must have svgalib package installed to compile
vga.h missing!!!
Any ideas how to get round this one ?
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy
On Wed, 2003-10-15 at 18:26, Greg Meyer wrote:
On Wednesday 15 October 2003 11:28 am, Richard Bown wrote:
Hi Greg,
[EMAIL PROTECTED] richard]$ rpm -qa python
python-2.3-3mdk
So yes its there
Maybe the test file you are trying to download no longer exists, or if
you are on dhcp
and MDK7.2
and they are dated between 1997 and the last I've seen is 2000.
Are the RPMs for PLD linux mdk or RH compatable ??
or is PLD on offshoot of Suse or Debian.
there is both src.rpm and rpm for PLD on rpmfind ??
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services
Thanks Markus
That nows behaves like a torrent,
There are still some errors , but it will have to wait until some
sanity returns to all the mirrors
Richard
On Wed, 2003-10-15 at 20:37, Markus Ueberall wrote:
Hi Richard,
On Wed, 15 Oct 2003, Richard Bown wrote:
I've installed
/usr/lib/rpm/macros file.
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Thanks Guys now got it working,
it may be of interest to non Hams as gpredict predicts the orbits of
other satellites as well
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi can some please tell me which file to download to install
- libgal.so.11
I tried libgal-2.0 but that seems to give libgal.so.21
Tnx
Richard
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
-ivh , they
both fail to install.
There are some tarballs , but I prefer to use RPMs as they are much
easier to upgrade.
Thanks
Richard
On Mon, 2003-10-13 at 20:33, HaywireMac wrote:
On 13 Oct 2003 20:06:41 +0100
Richard Bown [EMAIL PROTECTED] uttered:
Hi can some please tell me which file
that you
report. I removed ACPI and let it default to using APM and it now shuts down
fine.
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Thanks all
I've sent the compile errors direct to Alex
On Thu, 2003-10-09 at 03:42, A V Flinsch wrote:
On Wednesday 08 October 2003 04:57 am, Richard Bown wrote:
There are linux apps to do the same thing ie, echolinux.
I managed to get the driver compiled, but the gui throws up many
port some of the linux
Ham s/w to mdk compatibility and produce mdk RPMs ?
TIA
Richard G8JVM
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
-10-08 at 15:13, Daniel Anderson wrote:
On Wed, 2003-10-08 at 04:57, Richard Bown wrote:
Hi all
I know there are a few Hams on this list as I've spotted the odd
callsign on sig files.
Applications like Echolink which which only runs on windows are getting
very popular.
However
Hi All
I suspect this has been round before.I had'nt noticed it as I rarely use
a floppy these days.
But that friend noticed it ,( I suspect I have misspelt friend, in his
case maybe the r is missing).
I've checked my machines and they all do the same.
Which ever app uses the floppy drive first
On Mon, 2003-10-06 at 10:08, Anne Wilson wrote:
On Monday 06 Oct 2003 9:16 am, Richard Bown wrote:
Hi All
I suspect this has been round before.I had'nt noticed it as I
rarely use a floppy these days.
But that friend noticed it ,( I suspect I have misspelt friend, in
his case maybe the r
floppy or cdrom icon on the desktop nautilus
has an active process.
Any more thought s please
Richard
On Mon, 2003-10-06 at 10:18, Richard Bown wrote:
On Mon, 2003-10-06 at 10:08, Anne Wilson wrote:
On Monday 06 Oct 2003 9:16 am, Richard Bown wrote:
Hi All
I suspect this has been round
hassle.
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
/lib/modules/2.4.21-0.25mdk/kernel/sound/acore/oss/snd-mixer-oss.o
/sbin/insmod
/lib/modules/2.4.21-0.25mdk/kernel/sound/acore/oss/snd-pcm-oss.o
-Joachim
Richard Bown wrote:
Hi All,
integral sound card on a mobo.
Listed by hard drake as
ICH4 845G/GL chip set AC97, any ideas
the correct driver - when I try to print a
test page, it says it can't access the printer.
mike
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
to SMB server on machine
ENIGMA. Error was : SUCCESS - 0.
But again, I CAN print just fine.
mike
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Thanks to everyone who answered
Richard
On Wed, 2003-10-01 at 14:43, Gary Hodder wrote:
On Tue, 2003-09-30 at 23:42, Richard Bown wrote:
Hi All,
its that dreaded samba time again, two questions
which parameter in smb.conf(file name may be wrong)
do I set to make sure the gateway
/sound/acore/oss/snd-mixer-oss.o
/sbin/insmod
/lib/modules/2.4.21-0.25mdk/kernel/sound/acore/oss/snd-pcm-oss.o
-Joachim
Richard Bown wrote:
Hi All,
integral sound card on a mobo.
Listed by hard drake as
ICH4 845G/GL chip set AC97, any ideas what maybe compatable
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi All,
its that dreaded samba time again, two questions
which parameter in smb.conf(file name may be wrong)
do I set to make sure the gateway machine all ways wins elections for
master browser,?
my laptop keeps trying to take control.
Unfortunately, its got winxp on it as its an old pent 2
Hi All,
integral sound card on a mobo.
Listed by hard drake as
ICH4 845G/GL chip set AC97, any ideas what maybe compatable with it, as
sound is not configuring..
BR
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
Now thats what I call easy to use :))
Thanks
On Sun, 2003-09-28 at 00:21, lorne wrote:
On Saturday 27 September 2003 02:35 pm, Richard Bown wrote:
Tnx James I've loaded urpmi.setup,
so now just gotta sort out how to use it, its the one without a man page
Go to this url! It will be your
On Sun, 2003-09-28 at 09:58, Richard Bown wrote:
Now thats what I call easy to use :))
Thanks
On Sun, 2003-09-28 at 00:21, lorne wrote:
On Saturday 27 September 2003 02:35 pm, Richard Bown wrote:
Tnx James I've loaded urpmi.setup,
so now just gotta sort out how to use it, its the one
/synthesis.hdlist.mirrors.usc.edu_.cz]
problem reading synthesis file of medium mirrors.usc.edu_
unable to update medium mirrors.usc.edu_
[EMAIL PROTECTED] richard]#
Any ideas
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
machine, was a fresh install and I need the update source put
in to upgrade the kernel.
Could someone have a look at the club download thingy and see what they
think.
Thanks
Richard
On Sat, 2003-09-27 at 19:54, Anne Wilson wrote:
On Saturday 27 Sep 2003 7:09 pm, Richard Bown wrote:
Hi All
Tnx James I've loaded urpmi.setup,
so now just gotta sort out how to use it, its the one without a man page
:(
Richard
On Sat, 2003-09-27 at 22:04, James Sparenberg wrote:
On Sat, 2003-09-27 at 13:17, Richard Bown wrote:
Not Sure Anne, from what Rolf says in another reply the url looks
Hi All
I've done it again, well with just a little help from cooker RPMS.
a bit of background.
I decided to upgrade evolution to 1.4, so used the test RPM from the
club site.
RPMDrake could'nt install all the files, so install a slightly later
version from cooker,1.4.8
all the files and
Hi All , is the an idiot guide to setting up ssh anywhere.?
TIA
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
, Richard Bown wrote:
Hi All , is the an idiot guide to setting up ssh anywhere.?
Not really an idiot guide, but might be of interest:
http://linsec.ca/bin/view/Main/OpenSSH
the same article is on MandrakeSecure someplace, but the above is the one
that I'm maintaining.
--
Richard Bown
On Fri, 2003-09-19 at 14:48, Eric Fernandez wrote:
Richard Bown wrote:
Hi All,
I've persuaded a friend after a lot of nagging to move over to linux, so
he's bought the boxed MDK 9.1.
The onboard network card was found but the interface eth0 would'nt come
up as it complained the device
wrote:
On Thursday 25 Sep 2003 12:47 pm, Richard Bown wrote:
Hi Eric thanks for the help,
I spent a considerable time on the phone last night to my friend
and its now sorted.
As you suggested forcing noacpi worked, suprisingly the onboard
card was also fucnctional, so now just 1 NIC
very difficult to read, and I cant get back to the version I had
before as about 40 files were changed.
I'm also limited to about 36 characters /line when sending a message
Any ideas, this is a real pain :(
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from
preferred browser.
That dos'nt really matter as in a week or so I'll probably be running
MDK9.2.
Which mirrors are known to be up to date ?
one site I have a prob with is ftp.nluug.nl
and is texstars site still up ??
TIA
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services
is the most user frienldy install.
thanks
richard
james
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack
not too late, if not befor mdk9.3.
His system is still a bit of a mess , but should get it sorted.
thanks for the help
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
of forcing the interrupt for the NIC to use,its plug and
pray .
Thanks
Richard
--
Richard Bown [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
1 - 100 of 247 matches
Mail list logo