issued
by the manufacturer for their hardware.
Regards
Steve
rant
sorry just dont like all the negative mdk stuff, its LG's fault, it's now
weekend now so enjoy !
/rant
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
would have suited me as a
release, havnt found anything to complain about yet after a month or so.
But people its the weekend so ENJOY !
Regards
Steve
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
bit as well.
James
Umm, just in case eveyone is confused, this is proof that linux is better, and
can support HW vendors that arnt all that compliant.
Remeber this long and hard
Regards
Steve
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
been running 9.2 since it started on cooker and I
dont have any problems, just waiting for my Powerpak I pre-ordered to put on
my other machines.
And I agree keep up the good work Mandrake, I shalln't change distro for
nothing !
Regards
Steve
Want to buy your Pack or Services from
, and
on, and on ...), with support for VMWare, of course - if that helps
narrowing down the options (i.e. translated in good integrated NIC, good
Wi-Fi integrated one, etc.),
TIA,
Stef
I dont have any probs on an el-cheapo aopen, p4 1.7ghz running 9.2 cooker
Regards
Steve
Want to buy your Pack
for two days now and I'm only at 5.9%.
TIA
LX
I had the same problem + ALL adsl in South Africa gets capped at 3gig (up and
down together) so I would never have got the 3 cds anyway. I just bommed it
at 340meg after 48hours and ordered the Powerpak. I am running 9.2rc2 anyway.
Good luck
Steve
dont the mirrors mirror the three iso's as torrents and then
the general public can get the download advantage?
Regards
Steve
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
screens over a serial link.
-Original Message-
From: Richard Urwin [mailto:[EMAIL PROTECTED]
Sent: 19 September 2003 14:52
To: [EMAIL PROTECTED]
Subject: Re: [expert] remote access to text only screens
On Friday 19 Sep 2003 1:47 pm, Kitchener, Steve wrote:
Hi James,
I know about ssh
Hi,
I need to be able to get at the screens that are displayed when you enter
the key sequence CNTRL/ALT + F1 etc on a remote machine. I know that VNC
will give me a display of my desktop, but is there a facility in VNC that
isn't obvious or is there a text equivalent of VNC.
Thanks
Stephen
.
-Original Message-
From: James Sparenberg [mailto:[EMAIL PROTECTED]
Sent: 19 September 2003 11:03
To: Expert List
Subject: Re: [expert] remote access to text only screens
On Fri, 2003-09-19 at 02:42, Kitchener, Steve wrote:
Hi,
I need to be able to get at the screens that are displayed
an Nvidia
video card and a Viewsonic LCD; I had to download Nvidia's driver
before I could get KDE to load onscreen.
Steve
Stephen B. Browne
[EMAIL PROTECTED]
The Illuminati
Tesuque, NM, Chapter
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi...
Sorry to but in - but I am waiting to install the new kernel .25 but I am
holding off until I can find and build the new rams for Nvidia, I can find
the rpm on the Mandrake club site, but I cannot find the src rpms, do they
exist and if so, where would they be located.
Thanks
configure this, or
what should I be reading up on. I am using KDE, but would probably change to
ice when I get it working.
Any help / pointers appreciated.
Best regards
Steve Cox
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
,
This is perhaps a good thing. Competition is good for both sides. Of course in
the long run Linux will do and is doing better. Some of us are forced to use
M$ at work and stuff anyways. Less bickering = less time wasted = more time 2
develop.
Regards
Steve Cox
Want to buy your Pack or Services from
On Sunday, 29 June 2003 01:32, John Wilson wrote:
On June 27, 2003 09:56 am, Steve Cox - dig wrote:
Hi there,
This might be a little bit newbie, not sure. I want to keep an eye on my
ip address off my adsl line, as it changes I would like a scirpt to run,
basically uploading to a hosted
want to run dyndns just yet, but if this turns out to be the
best solution, then so be it, I will.
Oh, I am more a user, and not so good at bash scripting, so if there isnt an
easy way, dont worry, I'll go the dyndns route.
Best regards
Steve Cox
Want to buy your Pack or Services from
it aside) before trying,
if you dare, again. (btw mine works.. not that this helps you at all.)
James
If you want/are running cooker, update the normal updates first after the
fresh install, then cooker. I had some issues but came right. Running
smoothly now.
My 2 cents
Regards
Steve Cox
Want
.
Regards
Steve Cox
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Rob Blomquist
Sent: Tuesday 10 June 2003 06:32
To: Expert
Subject: [expert] Dumbest thing you have ever done as Root?
Well, I was trying to correct a few weird permission faults today in my
Hi Eric,
Could you send it to me as well - I have been looking to do this for ages -
thanks
-Original Message-
From: eric huff [mailto:[EMAIL PROTECTED]
Sent: 29 May 2003 15:59
To: [EMAIL PROTECTED]
Cc: Jonathan Dlouhy
Subject: Re: [expert] spamassassin kmail
Could someone either
.
The UDMA setting is controlled by the manufacturer's software utility.
I don't work with WD drives but I'll bet yours is set to UDMA2. Go to
WD's Web site and there is probably a utility you can download to
change the UDMA setting.
IBM's utility runs under PCDOS on a single boot floppy.
Steve
Stephen
,
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Fri, 18 Oct 2002 08:45:42 -0400, you wrote:
On Thursday 17 October 2002 10:55 pm, Steve Browne wrote:
...
dd if=/dev/hda of=/dev/hdb
This works for me on an ext2 system. Not sure about ext3 and the
others. Warning: depending on your CPUs and drive sizes, the transfer
can take a LONG time
, the transfer
can take a LONG time. Like, five hours.
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Thu, 10 Oct 2002 16:17:38 +0200, you wrote:
hi,
does anyone have knowledge about progs or scripts, which are able to find out,
which temperature the CPU have and perhaps RAM or other things ?
thanks and bye
hans
Install gkrellm. It's on your installation CDs.
Steve
Stephen B. Browne
.
The extended ASCII code is 168.
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
faisal gillani wrote:
hello there i have started using mandrake as one of my
normal usage O/S but i still cannot make out how to do
development in c++ for example in my windows i have
turbo c 3 which i use IDE to develop programs
if i want to make a program as follows how can i make
complie it
. I have no .profile in my /home/steve directory. There is
nothing in .bash_profile or .bashrc which lists the directories of
$PATH.
Where else should I look, or is there a runlevel 3 command (as root)
to reset user steve's $PATH ? Thank you.
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit
to the
Gnome DM. How do I change that? Thank you.
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
;
he's sold on the hardware.
The irony is, I recently read that IBM is getting out of the hard
drive business. I don't know if that means selling off that arm, or
stopping production. Anybody know more?
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services
the system shared libraries, thus Netscape can use
its shared libraries installed in the system, and Opera will use its own
that are compiled right into the binary.
Hope this helps,
Dave
There is a newsgroup, opera.linux If your ISP carries it, you might
find the problem discussed there.
Steve
Stephen
-plugins' I have no idea what this message
means. Do you?
Thanks,
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
There is no available input plugin available to handle 'xine-ui
version 0.9.8'.
means that xine can't find the DVD, or is a piece of the software
missing?
Regards,
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http
On Mon, 13 May 2002 16:12:17 -0400, you wrote:
On Mon, 13 May 2002 13:22:36 -0600
Steve Browne [EMAIL PROTECTED] wrote:
On Mon, 13 May 2002 19:16:37 +0200, you wrote:
Stephen,
Are you trying to run an encripted dvd?
The plugin for those dvd are not supported by Mandrake, due
the same problem, so I hope you get an answer. It has
something to do with missing symbolic links. You could try asking this
in the newsgroup alt.os.linux.mandrake; I often get quick answers
there.
Good luck,
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack
and /etc/modules.conf
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
The Netgear PS110 print server is also a very good choice. I went thru
two of the Linksys printservers, and never got either one of them to
work. Of course maybe the store I purchased them from had a bad batch.
I own alot of Linksys equipment, and never had a problem with any of
it. The
What is the best firewall to use with linux mandrake these days?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
rate? I'm using a Geforce 256 DDR, with the latest drivers from
Nvidia. I would appreciate any help you could offer. Thanks in advance.
Steve
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
that you just mentioned [rpm -tb x.tar.gz] would
still work like I just quoted.
Harold
There is a program called Alien which will do this. You will have to
rebuild Alien's rpm from the source code, which you can find at:
http://kitenet.net/programs/alien/
Steve
Stephen B. Browne
[EMAIL PROTECTED
Hi,
For some reason I dont know but today when I run
bzflags as normal user, things are terribly slow ;
even I have to reset the computer, I guess something
wrong with dri. After reboot, I try to run it as root
and it is good. Some permission is wrong but I dont
know how to fix it; probably the
Hi,
I dont know if some one has ; in one of my box, amd
athlon Duron 900Mn, S3 savagepro video card (I have to
use the latest savage_drv.o to work,not working by
default in Mandrake 8.1) . The problem is with the
mouse movement, If the setting by KDE default, (accel
2 threadshold 2) it is too
Hi,
Is there any way to tell mozilla not to unzip a tar.gz
file when downloading (save link as) ? I try edit
preferences and helper application file type but it
doesn;t show any hint, just two file types there and
not the tar.gz one, why mozilla always runs helper to
extract and save and the
Hi,
How can I tell ls to display the \ in a file name
or directory name
Usually if I do
mkdir Test\ This
ls
Test This
How can I tell ls to make its output as a continuous
string like Test\ This
Well the real problem is ; I want to convert every mp3
file in a directory to ogg vorbis, and
5. Run 'make modules_install make install'.
I nerver did that, I just 'make modules_install' and
manually copy the bzImage file from arch/i386/boot to
/boot and manually modify lilo.conf. always work :-)
This process used to work perfectly, but now the
process freezes my whole
computer
The VM in the kernel 2.4.x has problems this is a
_hot_ topic in the LKML; so the kernel in MDK8.1
From my experience I use 2.4.13 and it is quite good
in terms of VM management. Try it first.
Regard
--- David Guntner [EMAIL PROTECTED] wrote: I'm
running 8.1.
After starting my system,
--- David Guntner [EMAIL PROTECTED] wrote: Steve
Kieu grabbed a keyboard and wrote:
The VM in the kernel 2.4.x has problems this is a
_hot_ topic in the LKML; so the kernel in MDK8.1
From my experience I use 2.4.13 and it is quite
good
The kernel I mentioned is the official 2.4.13
Hi
I am looking for mozilla-0.9.7 for mandrake 8.1 ; if
any one knows where or compiled it sucessfully from
cooker source pls let me know. I try to compile from
source but it gave me segmentation fault when it
nearly finshed the compilation. And binary package
from cooker depends a lot of other
Lian-Li cases are really awesome. They're made of aluminum, they're
light, no sharp edges, and very high quality.
Bruce Endries wrote:
What are you looking for in a case?
I have been assembling computers for 10 years now, and have
used a lot of different kinds. Currently, for a normal
I got it ; I think we should file a bug report to mdk;
its MandrakeUpdate for 8.1 is really buggy.
I have to reinstall from scratch and now I still can
not update, (If I use it is back). Just use it to
install packages from cdrom ;
--- NDPTAL85 [EMAIL PROTECTED] wrote: For
some reason
Hi,
This is not running in mdk8.1 as the machine is too
old, 486 100Mh box 18Mb RAM, and a sound card (I am
not sure its type) working with sb.o driver in OSS
Free (the linux kernel) . I am trying to use it with
alsa but no success so far, tried using snd-card-sb8.o
; snd-card-sb16.o ,
lost focus. ;-) How
much are they, and where can you buy them?
Mike
Steve wrote:
Lian-Li cases are really awesome. They're made of aluminum, they're
light, no sharp edges, and very high quality.
E-mail scanned by McAfee
the chipset correctly, the kernel causes other things
to break. Does anyone have any suggestions on what would be the best
kernel to use on my system?
Steve
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi,
Which packages in mdk 8.1 needed to print a utf8 html
page and retain its WYSIWYG , ? I got several pages
using utf8 and truetype font Times-New Roman. It is
displayed correctly in both Mozilla and Konqueror but
when print out, it is not,
Thanks a lot in advance
=
S.KIEU
Also what app's are used to build vcd's under linux?
I heard of vcdimager, it is quite nice tool
All the
instructions I have found so far depend on xawtv to
create a .mov to
start the process, or have difficulties in one area
or another for me -
high processor usage, low frame
Hi,
I was confused, lame package in mdk is not mp3 encoder
:-) and the name is so confusing. I compile lame from
source but when running it gave segmentation fault
after working for a while, just wondering what is the
best mp3 encoding should I use? bladeenc included in
mdk but last time I try,
--- Marc [EMAIL PROTECTED] wrote: I downloaded
everything I need to install xine
0.9.7-3 (cooker rpms).
Installed all the plugins etc. now when I want to
play a divx file sometimes
the frames just hang during a video. Also sometimes
it takes 10 secons or so
before I hear sound, if I
I have a Solaris server at work running SSH-2.0-2.0.13 and lately I've
noticed weird addresses in the logs attempting to connect to the sshd
server. It seems that we have similar problems. Here are a few
examples of the log entries:
Dec 27 18:55:10 sshd2: refused connect from
Hi,
kppp has its known memory leak bug but I am not sure
if there is any update / fix or work around this bug
for Mandrake 8.1
Thanks
=
S.KIEU
http://my.yahoo.com.au - My Yahoo!
- It's My Yahoo! Get your own!
Want to buy your Pack or Services from MandrakeSoft?
Go to
Hi,
I have searched the bug database in alsa site but
found nothing similar, the thing is very strange. I
got via686a card ; two cd using ide-scsi for all as
one is cd-writer, alsa-0.5.12a ; everyhting is fine
(play xmms, etc..) except cd music doesn't play no
matter I try. When iserting music
--- Derek Jennings [EMAIL PROTECTED] wrote:
WinME does not need the cable to play Audio CD's
From Win ME onwatds Windows Media PLayer uses the
Yes u are rigth, I tested this
IDE interface to play CD's.
Some cheapskate manufacturers now save themselves
10p by not supplying the
cable!!
Hi all,
When installing mdk8.1 it suggests that I should use
XFree 3.3.6 if I want 3 D accelation with this cards
Riva TNT2, I did and some program (game) using OpenGL
doesn't work, (some work!) Then I read from the web
that nvidia has its own driver and works with 4.1.0 ;
admit that XFree
screen.
you haven't done that you are still using the
original Linux drivers. Check
out www.mandrakeforum.org site or www.nvidia.com and
look for documentation
for the drivers.
-Original Message-
From: Steve Kieu [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 15 January 2002 12:14
Steve Kieu [EMAIL PROTECTED] grumbled this:
Anyhow here is the link to the site I forgot to add
to the last email:
http://www.evil3d.net/articles/linux/howto/nvidia/mandrake8/
Yeas I checked that site read info there, but no file
to download ; When reading I found that may be the
other
Hi,
The printer I got is Epson Stylus C60, and it is
supported with CUPS+gimp-print-4.2.0 . If I run
Printer from Control Center it doesn't list this
printer. So I pull a gimp-print source code, compile
it with cups ; but after that I can not see the entry
in Printerdrake as well as access
Hi,
I guess that there are many people having no problem
with jdk but I have, that is strange;
Any way, here is what I did, I got a machine running
debian woody and install jdk1.3.1_01 in /usr/local; I
make a tar.bz2 of the directory and extract it to
/usr/local in the mandrake machine. Insall
Thanks the problem turns out to be rather stupid :-)
but I did not find it out, then reading your hint,
create a symbolic link to matches your java version
/usr/bin/java -
/usr/java/jre1.3.1_02/bin/.java_wrapper
/usr/bin/java exists and it is a wrapper to run kaffe
in Mandrake, not my jdk,
for the response
download the newest Xfree packages. These will solve
your problems with
the driver. Then boot into X and go from there.
Nelson
On Fri, 2002-01-11 at 16:24, Steve Kieu wrote:
Hi,
I would like to know if the card S3 ProSavage
KM133 is
supported by Mandrake and if yes how
Hi,
I would like to know if the card S3 ProSavage KM133 is
supported by Mandrake and if yes how or which
documentation for setting it up; Thanks alot
=
S.KIEU
http://my.yahoo.com.au - My Yahoo!
- It's My Yahoo! Get your own!
Want to buy your Pack or Services from MandrakeSoft?
Go
through each one? (I might miss
one, heh.)
Any assistance or guidance to the right direction would be greatly
appreciated.
Steve Helder
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
installing them? I would appreciate any help. Thanks.
Steve
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--- Marc [EMAIL PROTECTED] wrote: What video card
to use in Linux to watch movies on
my TV
In other words. Which video card has the best
tv-out support in Linux?
Please do not reply with theoretical bullshit, but
would like to hear some
practical examples.
IF you say so, why not
Hi,
I got several problem with xine and mplayer with mdk
8.1 with my friend machine.
Xine; compile latest version and install ok; but crash
the whole system in my friend comp (intel pentium 3 S3
savage4 rev 2 according to the XFree86 log file in
/var/log ) not leave any messages at all the
Hi,
My friend has a pentium 100Mh box with only 16Mb ram.
I need an advice on how to install mandrake 8.1 on
this machine, is it possible? Probably I need to
install in text mode?
By the way I would like to ask if any one has the same
problem, that is if I install Mandrake using the
Hi,
This printer is marked as fully supported but I can
not see the entry when using mandrake printter tool,
pls help
=
S.KIEU
http://my.yahoo.com.au - My Yahoo!
- It's My Yahoo! Get your own!
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Mon, Dec 17, 2001 at 10:29:57PM +0100, Tobias Marx wrote:
Am Mon, 2001-12-17 um 17.53 schrieb Klar Brian D Contr MSG/SICN:
look at http://xine.sourceforge.net
They state that with the win32 codecs (downloadable)
you can play Win Media 7/8 files
imho mplayer can play wma files, too
Everyone I need your help here. I just build a new computer using the
Tyan Tiger MP S2460 motherboard. For those of you that don't know, this
motherboard has the AMD 760MP chipset which supports the dual Athlon MP
processors. Anyway I have the Tiger MP with dual AthonMP 1.2 gig
processors
This bios recognizes the drive as a UDMA mode 5 drive which is ATA100, but
Mandrake does not.
Darwin Gottfried wrote:
20011218032158.DSYB15616.priv-edtnes15-hme0.telusplanet.net@there">
On Monday 17 December 2001 19:39, you wrote:
Everyone I need your help here. I just build a new
signature which mutt puts under my mail body.
One possible solution may be running the script by a cron job every 5
minutes during 'mail writing hours'.
Since you're using mutt, one can put the uptime in the headers as well.
I prefer this over the signature tag line. shrug.
--Steve
Want to buy
Hi,
Whenever I login from other machine, the variable
$REMOTEHOST is set to the hostname of that machine,
but it is not in Mandrake. How can I enable this?
Thanks
=
S.KIEU
http://shopping.yahoo.com.au - Yahoo! Shopping
- Free CDs for thousands of Priority Shoppers!
Want to buy your
On Tue, 27 Nov 2001 23:11:19 +0600, you wrote:
has anyone successfully build galeon-1.0 from mozilla-0.9.6??
mark
Someone said that if you have mozilla-0.9.6 you can install galeon
1.0-1 from the i386.rpm (without rebuilding from source). If this
works, let me know.
Steve
Stephen B. Browne
Good luck! You sure you don't like rpms?
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
dependencies not included in Mandrake 8.1. So I'm sticking with the
old 0.12 until Mandrake cooker offers 1.0.
It is getting more and more difficult to upgrade just a part of a
release because of all the changing dependencies. So why bother?
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
.
If this ? mechanism ? is an Xsetroot, how do I convert the
jpeg to a pm files easily.
Again thanks in advance for your advice.
Steve
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
but can't seem to figure this out.
-Steve Hare
If anyone is using the Tyan Tiger MP S2460, could you please tell me how
you were able to get udma 100 to work properly. Mandrake 8.1 wants to
use udma 33 instead. I figure it may have something to do with Mandrake
detecting the AMD 760MP chipset. If you have any pointers on setting up
what happens. Do you know if the lm sensors package will work with
this motherboard?
J Grant wrote:
Hi Steve
I do not know the state of the current kernel but my mdk8.1 box had and
is still having problems with my
adaptec SCSI card did not work, IDE CDROM would not work, finally I got
another
this happen? Installing one program SHOULDN'T interefere
with another program.
Thank you,
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
, because when I removed AbiWord (rpm -e abiword) and
relogged in, the KDE desktop was back to normal even though I have
left libpng3 installed. The fault is with AbiWord OR its interaction
with libpng3. BTW, AbiWord was working fine with libpng3. Further
thoughts? Thanks.
Steve
Stephen B. Browne
suggestions?
Thanks.
--
Steve - Toronto ICQ 35454764
/~\
'If you're not a rebel when you're 20 you've got no heart; if \ /
you're not establishment when you're 30 you've got no brain. X
for the suggestion however Bill.
On Thu, 2001-10-18 at 21:33, Steve wrote:
Wierd problem I'm having just recently. After my box has been up for a
couple of days the period char won't appear when I type it in a
terminal. Using rxvt but the same happens in xterm or aterm. Restarting
Xserver fixes
If you were asked by someone to build two linux workstations where one
had to be pentium 4 based and the other athlon based, what two
motherboards would you use?
For the pentium 4, I was considering the Abit TH7II-Raid (i850 chipset).
I am not for certain if there are any known issues with
, and that NetBSD is considered the most ported UNIX.
Other than that, the web sites will be much more informative
Don't forget BeOS as well will run quite nicely on a Nubus box.
Still available for free last time I checked.
--
Steve - Toronto ICQ 35454764
On Sun, Sep 23, 2001 at 11:51:09AM -0400, Steve wrote:
On Sat, Sep 22, 2001 at 08:40:07PM -0400, Asheesh Laroia wrote:
I can confirm that many sources (via http://www.google.com/search?q=linux+8100+mac)
agree that MkLinux will run on your Mac.
However, OpenBSD and NetBSD also run. If I
Backquote them.
For example
cd A\ directory\ with\ spaces
Don't forget you can always uses filename completion by typing part of the
name and hitting tab.
As for scrolling back up console screens, you can use SHIFT-ARROW-UP or
PAGE-UP
Steve Flynn
NOP Data Migration Ops Analyst
* 01603 687386
booting, type from the command or Xterm line, lilo. That
will reconfigure lilo.
Steve
Stephen B. Browne
[EMAIL PROTECTED]
Veritas odit moras
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Cheers Laurent - perfectly acceptable answer from Jeff, and I can see the
logic behind it. Thanks for looking into it for me. Satisfied my curiosity
anyway!
Steve Flynn
NOP Data Migration Ops Analyst
* 01603 687386
-Original Message-
From: Laurent Duperval [SMTP
This works here...
Remove all files in your home directory named a.out or *.o that have not
been accessed for a week:
find $HOME \( -name a.out -o -name '*.o' \) -atime +7 -exec rm {} \;
Note the '*.o'...
Steve Flynn
NOP Data Migration Ops Analyst
* 01603 687386
-Original
for performance increases, but it appears to fail as it
causes swapping itself!
Have I got the wrong end of the stick?
Steve Flynn
NOP Data Migration Ops Analyst
* 01603 687386
-Original Message-
From: Laurent Duperval [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, September
This might be a silly question but how do I actually perform this
pre-linking act. I've only just upgraded to MDK 8.0 from 6.5 so I've never
had this problem before, but I have noticed a considerable difference in KDE
startup time since performing the re-install...
Steve Flynn
NOP Data Migration
HD activity on your box when this happens?
Also, I notice that X seems to consuming a hell of a lot of ram on your
machine - I don't have an Mandrake 8.0 machine here at work, to check but
I'm sure my box with 256 meg doesn't have 37M sucked up by X!
Steve Flynn
NOP Data Migration Ops Analyst
1 - 100 of 536 matches
Mail list logo