Hi,
before F12 i didn't have any problems to configure my Epson Aculaser
C4000 with CUPS. Unfortunaly, with F12 it doesn't work.
The recommended driver doesn't work (my printer doesn't seem to like PS)
and when I use my previous PPD file, it says to me that there is no filter.
Anyone has an
Hi,
I have a big problem on a production server. I use a ssh connection with
a nagios server to monitor external servers.
In f11 there was no problem.
But if F12, a ssh connection takes a lot of time.
For example :
time ssh x 'ls'
id_rsa.pub
real0m35.633s
user0m0.013s
sys
A lspci -v gives me the following informations :
02:00.0 Audio device: Creative Labs SB X-Fi
Subsystem: Creative Labs Device 6002
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at dfff8000 (32-bit, non-prefetchable) [size=16K]
Memory at dfc0 (64-bit,
Hi,
i was the postman of this topic. It took another way of discussion but
I didn't get an answer for my question...
Is there a driver available on F12 for the SoundBlaster X-FI card ?
BR
Le 14/12/09 23:23, Stewart Williams a écrit :
Marko Vojinovic wrote:
On Friday 11 December 2009
Thanks for your (fast) answer.
In fact, the module snd-ctxfi.ko is well loaded on my system :
lsmod |grep xfi
snd_ctxfi 90984 2
snd_pcm83144 3 snd_hda_intel,snd_hda_codec,snd_ctxfi
snd67592 17
Have you try gnash ?
It is in the fedora repo...
Le 14/12/09 16:37, Marc Wilson a écrit :
On Sun, Dec 13, 2009 at 4:21 AM, Simon Schneebeli
simon.schneeb...@okko.org wrote:
Based on http://fedoraproject.org/wiki/Flash I tried to install the Flash
plugin. But when I try
u
Hi,
by default, even in an imap account, TB3 downloads messages to allow
users to read fastly theirs emails. It is a feature you can disable by
the options.
Le 14/12/09 16:50, Gianluca Cecchi a écrit :
hello,
just seen the warning window about low disk space in my /home file
system (nice
Hi,
I use an OpenLDAP server to permit users to log in their computers. All
seem to be ok but for a while.
After several days, users are required to change their passwords (I've
never configured it) and they cannot do that (they are said they don't
have enough rights to do this).
Has anyone
Hi,
is there any driver available under F12 for Creative Labs SB X-Fi ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Hi,
I have a mail server which was installed in F11 with a
Amavis/Clamav/Spamassassin architecture and all worked well.
Since updating to F12, the file user_prefs of user amavis seems to be
ignored.
Any anyone experience this troubleshooting ?
BR
--
fedora-list mailing list
Hi,
I launched a 'chkrootkit' on my mail server and it gave me the following
error :
Checking `bindshell'... INFECTED (PORTS: 465)
I think that isn't a problem because a use this port with postfix as SMTPS.
Am I right or wrong ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To
Hi,
I wanted to migrate all my servers from F11 To F12.
Some work well.
But some on the reboot after preupgrade, anaconda gives me an error in a
python script : error : unsupported locale settings and the
installation halts
Any idea ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
That's it !!!
If the system has lang=fr...@utf-8 in /etc/sysconfig/i18N, it works.
If the value is fr...@euro (set for Latin9) it doesn't work...
Many thanks
Best regards
Le 25/11/09 13:17, Rahul Sundaram a écrit :
On 11/25/2009 02:22 PM, Luc MAIGNAN wrote:
Hi,
I wanted to migrate all
Hi,
I tried to install the kmod-nvidia package under f12 but yum doesn't see
anything :
yum search kmod-nvidia
Modules complémentaires chargés : presto, refresh-packagekit
fedora/metalink
Hi,
I still have the following error while preupgrading :
Traceback (most recent call last):
File /usr/share/preupgrade/preupgrade-cli.py, line 312, in module
pu.main(myrelease)
File /usr/share/preupgrade/preupgrade-cli.py, line 175, in main
self.setup(myrelease)
File
Hi,
I need to setup a wiki system for my company. I need something simple to
use, but robust, customizable with a database support (MySql or PostgreSql)
What is the best choice ?
Thanks for advices
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
Hi,
I try to compile latest nvidia drivers for a GEFORCE 8600 GTS under F12,
but it doesn't work and the log isn't very verbose.
Has anyone succeed to do this ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Hi,
I have setup a postfix server under a F11-x64.
All seem to be good, but when a user send a mail using 'Lotus Notes'
postfix says '554 5.7.1 client host rejected : access denied'
Has anybody an idea ?
Any help would be appreciated
Best regards
--
fedora-list mailing list
I'm note sure. My configuration works with all clients except the Lotus
Notes' ones
Le 18/11/09 19:15, Greg Woods a écrit :
On Wed, 2009-11-18 at 18:45 +0100, Luc MAIGNAN wrote:
Hi,
I have setup a postfix server under a F11-x64.
All seem to be good, but when a user send a mail using
Hi,
i try to preupgrade my F11 to a F12 but id doesn't seem to work well...
preupgrade-cli -y Fedora 12 (Constantine)
/usr/lib/python2.6/site-packages/yum/__init__.py:203: UserWarning: Use
.preconf instead of passing args to _getConfig
warnings.warn('Use .preconf instead of passing args to
Hi,
At the top of your mail folders, you have two little arrows. Using them
allows you to change the look of your accounts and permit you to go back
to an inbox per account
Regards
Le 02/10/09 16:59, brian a écrit :
I've just installed TB3b4 (because 3b3 was driving me nuts). I use
IMAP,
Hi all,
previously I had a F8 mail server on which saslauthd daemon as smtp
authentication checker. And all has worked fine...
I migrate my server to F11, and I have problems with saslauthd. After a
while (perhaps 2 days), authentication fails but the daemon still run. I
have to 'killall
Hi,
Is it safe to preupgrade a F7 32 bits to a F11 64 bits ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
It seems that OpenSUSE works fine. Fedora Slackware hang.
BR
Luc
Chris a écrit :
2009/7/14 Luc MAIGNAN luc.maig...@winxpert.com:
We can note that Linux is unable to manage my sound card (Creative SB X-FI).
Can it be the problem ? (but no driver is loaded...)
Well, maybe somebody
Hi,
for those that have follow my pbs, my PC hangs up under fedora after two
or three minutes. I tried to install a Slackware and during
installation, I've got the error 'Disabling IRQ #19'. I think all
problems are linked.
Has anyone a idea to fix this problem ?
BR
--
fedora-list mailing
Unfortunaly, my PC works fine under Windows. :-( So I don't think it's a
hardware issue.
We can note that Linux is unable to manage my sound card (Creative SB
X-FI). Can it be the problem ? (but no driver is loaded...)
Luc
Chris a écrit :
2009/7/14 Luc MAIGNAN luc.maig...@winxpert.com
Hi,
I'm desesperate
Even after updating latest version of kernel, after a few minutes the
fan is starting and my systems hangs up. It is the same in level 1,3 or
5. Starting without acpi make the systems very very very slow (a yum
update kernel took 3 hours...)
Has anyone an idea ???
Le 6/07/09 15:56, Patrick O'Callaghan a écrit :
On Mon, 2009-07-06 at 10:16 +0200, Luc MAIGNAN wrote:
Hi,
I'm desesperate
Even after updating latest version of kernel, after a few minutes the
fan is starting and my systems hangs up. It is the same in level 1,3 or
5. Starting without
For more informations about my system, I have a Dell Vostro 400 (Intel
Dual 2 Core with 4GB of memory).
Unfortunaly, Windows runs without problem on this hardware
Le 6/07/09 15:56, Patrick O'Callaghan a écrit :
On Mon, 2009-07-06 at 10:16 +0200, Luc MAIGNAN wrote:
Hi,
I'm desesperate
Hi geeks,
I caanot work with Fedora 11 on my Dell Vostro 400...
The facts :
- after a while (3 or 4 minutes), I hear the cpu fan starting and at
this moment, my system hangs up and I have up shut power down...
- I read /proc/acpi/thermal_zone/THRM/temperature but is is correct (40 °C)
- I
Hi,
I've setup an access to a samba share from outside using a VPN connexion
(OpenVPN architecture Linux on Server - Windows on Client). The clients
use a 3G internet connexion and assume the architecture is too slow to
be usable.
Is there another architecture to share samba over internet
yum install openvpn:-)
[EMAIL PROTECTED] a écrit :
Dear All,
Is there any solution for installing OpenVPN with FC System ?
Thanks !
Edward.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
Hi,
I want to use wireless under F9 (x86_64). I have a BCM4328 (rev 05) card.
I tried ndiswrapper. It seems to load correctly the driver but no
interface is available.
Is there another way to use this hardware ? How can I mount a network
interface since ndiswrapper has loaded the driver ?
Hi,
I try to install a F10 on a MacBook Pro. The keyboard is assumed to be a
PC one. I try to change the type of the keyboard in the Gnome menus, but
I have the following errors :
Error activating XKB configuration.
It can happen under various circumstances:
- a bug in libxklavier library
-
Hi,
I wanted to install F10 on an external FireWire drive (Western Digital
MyPasseport III). But unfortunaly, F10 is unable to format it (it hangs
after 90%) ou write packages on it (hangs after 450 packages on 1300).
There was any problem on the same hardware with F9.
ANyone has an idea ?
I can reproduce the problem by booting in rescue mode and make a
mkfs.ext3 on the partition of my drive. mkfs hangs after a while. No
messages are shown
Bryn M. Reeves a écrit :
Luc MAIGNAN wrote:
Hi,
I wanted to install F10 on an external FireWire drive (Western
Digital MyPasseport III
Hi,
I want to setup an IMAPS connection on my mail server. But at the launch
time, I've got an error (DOVECOT) that tells me it cannot decrypt the
private key.
How can I test my private key to see its contents or test the password ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To
Hi,
I try to install Fedora on an external drive and boot it from a Mac Book
Pro (REFIT as boot loader).
I setup Grub on the MBR of the external disk.
Unfortunaly, when I try to boot, it tries to boot Windoze :-( !!!
Has anyone experience of such installation ?
BR
--
fedora-list mailing
Hi,
I've setup a LVM volume on several disks.
It appears that one at least of the disks has crashed.
Is there a way to recover data on the good disks or all is lost ?
Thanks for any help
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
Hi,
I have several servers (F8 and F9, 32 64 bits).
I 'm looking for tips for improve theirs performances (httpd, samba,
dns, ...)
Is there a general howto on linux optimization (kernel 2.6)
Thanks
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
I've done that. It seems to be ok but I don't have any 3D acceleration.
Have I to use a commercial driver ?
Armin Moradi a écrit :
On Wed, Sep 24, 2008 at 6:15 PM, William Biggs [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
where do I download and how do I install it for fedora 9 64
lspci -v ?
Ed Greshko a écrit :
Paul Smith wrote:
Dear All,
How can one determine from F9 the reference of my graphic card?
Thanks in advance,
Paul
Could you rephrase the question?
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
Hi,
I'm looking for a tool that can import and export music to my iPhone
(because Apple still refuse to port iTunes on Linux !!!). What is the
best tool to do this on Fedora ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
Thanks. I've already tested GtkPod but it doesn't work with my iPhone
Paul W. Frields a écrit :
On Tue, 2008-09-09 at 15:03 +0200, Luc MAIGNAN wrote:
Hi,
I'm looking for a tool that can import and export music to my iPhone
(because Apple still refuse to port iTunes on Linux !!!). What
Hello all,
I have a Creative Labs SB X-FI sound card. I cannot setup it or use the
beta driver provided by SB. Is there a way to use a generic driver to
use my sound card ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
Hi,
A advertising for OBM (http://www.obm.org) says that OBM is available in
Fedora 9 public mirror, so a 'yum install obm' is intended to work.
But it doesn't seem to be the case.
Has anyone information about this ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
I have the same problem.
I try to install the beta driver given by Creative, but I have a issue
installation I don't understand for the moment.
On an other way, why this card can't be supported by Alsa in the next
releases ?
Gilboa Davara a écrit :
On Sat, 2008-07-19 at 22:21 +0100,
Hi,
to list all files on my hard disk, I use the combination of Shift +
DblClick, to prevent a new window to be opened each time I go down a folder.
This worked even in F9, but it doesn't work any more (perhaps a system
update ?)
Can anyone tell me how to reproduce this feature ?
BR
--
Hi,
I setup OpenVPN both on client (some Linux and some Window$) server
(fedora) to access samba shares over Internet. All seems to work right
but it is very slow. Is there a way to improve access time ? (laptop
which uses cellular line to access to VPN fall in timeout very often)
BR.
--
Message original
Sujet: OpenVPN performance
Date: Sat, 12 Jul 2008 18:29:52 +0200
De: Luc MAIGNAN [EMAIL PROTECTED]
Pour :: For users of Fedora fedora-list@redhat.com
Hi,
I setup OpenVPN both on client (some Linux and some Window$) server
(fedora
try :
smbpasswd -a Newuser
[EMAIL PROTECTED] a écrit :
Hello,
I set up samba and added my user name w/ smbpasswd and there was no problems. I
can connect to my samba share from MacOSX and Windows. However, I created a new
user with useradd and when I try to set his smb password I get the
Hello,
it is a normal feature because your regex works on only one caracter ':'
and not all. You should use 'g' as 'global' modifyer to do what you want :
echo 2008:04:23 | sed 's/://g'
Regards
wwp a écrit :
Hello Guillaume,
On Mon, 30 Jun 2008 13:58:29 +0200 Guillaume [EMAIL PROTECTED]
Hi,
I 've extended a volume group by addind a new disk (pvcreate, vgextend
and lvextend).
All seems to be ok, while lvdisplay gives me the new modified size .
But a 'df' continues to give me the old size.
What's wrong ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
:-) so funny
I manage myself the network via iptables rules.
I don't want to bring traffic to 0, just limit downloads availability to
certains users
Mark Haney a écrit :
Luc MAIGNAN wrote:
Hi,
What is the easyest way to limit bandwitdh usage for an IP address on
my network ?
BR
Hi,
I have a date problem with my smtp daemon (postfix).
Postifx use several daemons I can see in /var/log/maillog.
The problem is that all postfix dameons use my real time, except smtp
wihich uses GMT time.
How can I solve this issue ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
Hi,
i was despite while seeing the message 'no space left on device' because
a 'df' gives me 12 Go available !!!
I did also a 'df -i' and I see 100% of inodes used !!!
so :
* how can I have all inodes used and so spaces available ?
* is there a way to fix it ?
BR
--
fedora-list mailing
Hi,
I try to use SARG to have statistics from squid logs, but unfortunaly
SARG makes a segmentation fault while processing.
Has anyone a workaround for this ?
do you know another tool to analyse squid logs ?
BR
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
I have the same problem, my client has been upgraded to F9 but the
server is still in F8. Have I to modify as described ?
Steve Searle a écrit :
Around 04:05am on Wednesday, June 11, 2008 (UK time), Danny Yee scrawled:
Since upgrading to Fedora 9, my ssh connections from home are
Hi,
I definitively can't force cp to override existing files without asking
confirmation.
According to documentation , I try :
cp -r --force src/file1 ./
but always a confirmation is asked...
What's wrong ?
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
Hello wwp,
you're right.
My cp is an alias to 'cp -i' I'm despite to have a so beginner
problem.
Thanks for help time
BR
wwp a écrit :
Hello James,
On Tue, 10 Jun 2008 10:43:48 -0400 James Kosin [EMAIL PROTECTED] wrote:
Luc MAIGNAN wrote:
Hi,
I definitively can't
Hi,
I want to test the strength of the passwords of my F9 box. I wanted to
use John The Ripper but it doesn't seem to support SHA-512 algorithm
used by default by F9.
So :
* Do you know a patch I can apply to John so it can support SHA-512 ?
* What else tool can I use in place of John ?
Hi,
in my mind VirtualBox was present in the repositories of the previous
versions of Fedora. But it doesn't seem to be in the F9 ones'.
Am i wrong or has it disappear ?
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
62 matches
Mail list logo