[flexbackup-help] $blksize and mt_blksize

Hi, I would like to know the meaning of these two variables: $blksize And mt_blksize Can someone could explain clearly to me, how t configure this variable. Thanks a lot. This email may contain information

RE: [flexbackup-help] help

Yes already , for the moment i erase all the tape cause the process during 4 hours. So when it cleared, i do all things you said. But I have already made all of them. Thans a lot for all. -Message d'origine- De : Niall Brosnan [mailto:[EMAIL PROTECTED] Envoyé : mardi 7 juin 2005 15:58 À

RE: [flexbackup-help] blksize parameters

RE Niall After erasing, i'll give you all infos about each questions you asked to me. What output do you get from: " mt status "? [EMAIL PROTECTED] local]# mt -f /dev/st0 status SCSI 2 tape drive:File number=0, block number=0, partition=0.Tape block size 4096 bytes. Density code 0x47(

RE: [flexbackup-help] blksize parameters (fwd)

Hi list and niall Can you run a simple tar to the drive? mt -f /dev/st0 status - I've already answered mt -f /dev/st0 rewind Nothing too [EMAIL PROTECTED] flextest]# tar cf /dev/nst0 /etc tar: Retrait de l'en-tête `/' des noms des membres mt -f /dev/st0 rewind Take time but ok tar tf