Re: [FlexEdge] F1.5K - can the power output be set to gradations such as 1/2W, 1/4W etc.

To go lower on the FLEX-5000 you can use the transverter port (10m only) or use an external RF attenuator. The 1500 will operate in the mW range from 160 to 6m -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150

Re: [FlexEdge] Flex 5K - Problem on RX2 Receiving HF while RX1 on VHF

RC4 is currently in internal beta test and not stable enough for public beta testing. There will probably be an internal RC5 too as we're still squashing bugs. No ETA yet on the general release of 2.1.x. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio

Re: [FlexEdge] FM

dates of either 2.1.x or 2.2.x. :-) -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] FM

I am afraid so, Captain. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] FM

=Reflector_Guidelines Thanks for your patience and understanding. Have a great day and make some QSOs. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com

Re: [FlexEdge] FM

Except when I am working FM LEOs or digipeating off of the ISS, I want a Ferrari Daytona. FM is not only for repeaters. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223

Re: [FlexEdge] Drop outs

Make sure your Windows 1395 Firewire driver is set to Legacy mode. In the FLEX Firewire control panel, you can try a higher level of Safe Mode ( 2 or 3) -Tim -- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX

Re: [FlexEdge] V/U Repeater Mode on RX2

That is correct. The memories only change VFO-A (RX1). There is a feature request for adding a VFO-A / VFO-B selection in the internal enhancements database (US-637) -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1

Re: [FlexEdge] Toolbar Highlight Colour

I have added this to the developer's internal bug tracker: DE-568 -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

Re: [FlexEdge] Toolbar Highlight Colour

Thanks for all the data points regarding this issue. Your feedback is greatly appreciated. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com

Re: [FlexEdge] HOT SUMMER! - HOT DEAL on FLEX-1500!

Don't forget about the limited time FLEX-5000 Summer Sale. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

Re: [FlexEdge] HOT SUMMER! - HOT DEAL on FLEX-1500!

I'll pass on your comments to the Sales and Marketing team. -Tim Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

Re: [FlexEdge] HOT SUMMER! HOT DEAL on FLEX-1500!

Please forgive my typo. I did not mean to write FLEX-5000. It was supposed to be FLEX-1500. Thanks to all of you who pointed out my faux pas. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728

Re: [FlexEdge] [Flexradio] HOT SUMMER! HOT DEAL on FLEX-1500!

Please forgive my typo. I did not mean to write FLEX-5000. It was supposed to be FLEX-1500. Thanks to all of you who pointed out my faux pas. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone

Re: [FlexEdge] [Flexradio] HOT SUMMER! HOT DEAL on FLEX-1500!

--- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo /Tune In Excitement™ PowerSDR

Re: [FlexEdge] PTT Timing

What operating system are you using? -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] PC-ALE and my 3000

Ted, See my comments below. -Tim Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] Sideband Supression

You have the left and right transmit audio channels (from sound card) swapped. -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t

[FlexEdge] PowerSDR v2.2.2 BETA is available for testing

. - The FlexRadio Software Development and Product Management team -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] PowerSDR v2.2.2 BETA is available for testing

Sorry about that. It is a PDF file now. Re-download. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

[FlexEdge] TNF operation hints

have to 4x ZOOM in on the Panadapter to adequately see the TNF to manipulate it. Enjoy. -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

[FlexEdge] How do I love thee notch, let me count the ways...

while allow some of the higher AF frequencies to be present, making a better sounding pseudo narrow filter. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t

Re: [FlexEdge] Wave File Format

There is no meta data embedded in the wave file itself. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] +TNF button gray bars or green bars

) notches in the RX passband. 9.) You can have essentially unlimited TNF defined on any frequency. 10.) You may have to 4x ZOOM in on the Panadapter to adequately see the TNF to manipulate it. == -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio

Re: [FlexEdge] Wave File Format

This enhancement request is in the database for future consideration. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

Re: [FlexEdge] TNF operation hints

The official documentation is in progress. We wait for feedback from the beta tested to determine how verbose we need to be. Just one of the beta processes. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone

Re: [FlexEdge] TNF operation hints

Was the TNF wide enough to cover the entire birdie and the notch depth set to 3x? -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com

Re: [FlexEdge] upgrade

Each version is completely independent of all other releases. Uninstalling a previous version or incrementally upgrading to an intermediate version is not necessary. All newer versions are cumulative in fixes and features. -Tim --- Tim Ellison, W4TME Product Management, Sales Support

Re: [FlexEdge] PowerSDR

You are on the right list. A public beta version announcements are made on the FlexEdge list. The announcement e-mail will contain the links to the release notes and the PowerSDR Integrated Installer. The one for PowerSDR v2.2.2 BETA was made last Thursday evening. -Tim --- Tim Ellison

Re: [FlexEdge] PSDR 2.2.2

in the RX passband. 9.) You can have essentially unlimited TNF defined on any frequency. 10.) You may have to 4x ZOOM in on the Panadapter to adequately see the TNF to manipulate it. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX

Re: [FlexEdge] VAC Buffer size?

sampling rates (using the FLEX-1500) I use 512. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] Memory display bug!

Make the memory form bigger by dragging the corner to make it large. Then drag it back to make it smaller. The Close after selection button is not in the correct location on the form. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste

Re: [FlexEdge] A new way to request support and submit enhancement requests

allows us to provide better technical support. As our Flexer family continues to grow, we need these types of processes and tools to ensure we continue providing the very high service levels you have come to expect over the years. -Tim --- Tim Ellison, W4TME Product Management, Sales Support

Re: [FlexEdge] tnfs

implemented in the software at http://helpdesk.flexradio.com -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] TNF + WBIR reset = hello, new radio!

buffers require more PC resources. You can begin here on your buffer knowledge quest. http://kc.flexradio.com/KnowledgebaseArticle50437.aspx In my case, the answer is neither. I use 512. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1

Re: [FlexEdge] TNF + WBIR reset = hello, new radio!

audio 3.) Connect a dummy load to ANT-1 (or ANT for a FLEX-3000/1500) 4,) Run the calibration tests 5.) Using the facility in SETUP, import the database copied to your desktop in step 1. 6.) Restart PowerSDR -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM

Re: [FlexEdge] TNF + WBIR reset = hello, new radio!

Enter CTRL + SHIFT + P to access the FLEX-5000/3000 Production HTRX Test form used to calibrate the receiver. This is not applicable to the FLEX-1500 -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535

Re: [FlexEdge] Why does VFO get stuck?

I reproduced this software defect. It is in the developer's bug tracker. Thanks Drax et. al. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t

Re: [FlexEdge] flex1500

Jose, Please open a support ticket with the FlexRadio Helpdesk (http://helpdesk.flexradio.com) Klaus or Dudley can take care of you. I would, but I am not in the office for the next several days. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W

Re: [FlexEdge] Ver. 2.2 Time display missing

This is a Windows problem, not PowerSDR. PowerSDR queries a Windows perfmon stat and displays results for system time and total CPU load. Re-installing PowerSDR will not achieve the anticipated results. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM

Re: [FlexEdge] Audio Recording Volume Level in Receive - ver 2.2.2

Dave, Are you recording pre-processed (complex or I/Q audio) or post-processed (real audio)? BTW, I love your call. Me being a University of Tennessee Volunteer. Go Vols! -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150

Re: [FlexEdge] High Noise Level Flex 5k

Steve, Try the RX1 In port and see if there is a difference. If it is OK, then it is probably the HRFIO board. A simple field installable swap if the VU is not installed. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin

Re: [FlexEdge] waterfall display disappeared

for good display performance. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo /Tune

Re: [FlexEdge] Flex 5000 receiver preamp

Burke, Please open a Helpdesk ticket (http://helpdesk.flexradio.com) so we can triage the problem and determine if it is a hardware issue. Thanks -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713

Re: [FlexEdge] OT? Remote desktop software?

VNC TeamViewer Crossloop Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo /Tune

[FlexEdge] Eterlogic - pros and Cons requested

the free driver and wanted some feedback before getting the for fee x64. Feel free to contact me off list if you do not want to wast the reflector bandwidth. version. -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512

[FlexEdge] PowerSDR v2.2.3 is officially released

from our web site at: http://support.flex-radio.com/Downloads.aspx?id=377 - The FlexRadio Software Development and Product Management team -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email

Re: [FlexEdge] v2.2.3 JT65

Did you import a database? If so, I recommend that you do a reset to factory defaults and manually set up VAC. I have been decoding JT65-HF for the past 52 hours without any problems using PowerSDR v2.2.3 -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM

Re: [FlexEdge] PSDR 2.2.3 won't start

Try a database reset. Either with the Setup utility or manually Test before doing any data imports or transfers -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t

Re: [FlexEdge] RX2 VAC

Bill, The enhancement request for a separate VAC cable for RX2 is in the developer's enhancements database and shall be considered for a future release. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone

Re: [FlexEdge] ESC

than stereo diversity where you feed the signals from RX1 and RX2 into different speakers and you let your brain do the signal processing. However, gain leveling as Bob indicated in a follow up e-mail is something that we are looking into. -Tim --- Tim Ellison, W4TME Product Management

Re: [FlexEdge] Does this PSK-31 signal look ok?

Using a 300 Hz wide TX filter will eliminate them. Just draw in the TX filter band edges while transmitting until the unwanted sidebands are suppressed. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535

[FlexEdge] Looking for a JT65 EME I/Q data file

I am doing a demo this weekend and I am in need of an I/Q file of a JT65 moon bounce QSO. Anyone have one I can use? -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t

[FlexEdge] Feedback needed from Flex Edgers

a software bug, then you need to open a support ticket so we can verify the software behavior. Make sure to include the PowerSDR version number and a detailed description of how you can reproduce it so we can investigate. Thanks for your help and have a great weekend. -Tim -- Tim Ellison, W4TME

Re: [FlexEdge] PWRSDR v2.2.3 suspected bug in Cat_Commands

I just tested it using the CAT test feature in PowerSDR and ZZTF1 turned on the filter indicator and ZZTF0 turned it off. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t

Re: [FlexEdge] Support Tab

We know. We are working on it. Thanks for the heads up. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] PWRSDR v2.2.3 suspected bug in Cat_Commands

You are correct. Good catch. I have submitted a defect report for it. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

Re: [FlexEdge] Low band preamp

And your radio hardware is? The preamp behave differently depending on the radio hardware. -Tim Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t

Re: [FlexEdge] Low band preamp

The preamp in the FLEX-5000 rolls off before the 80m band, therefore it has little effect on 80 and no effect below that frequency which is why you can not engage it on 160m. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin

[FlexEdge] Hamfest schedule change for Tampa Bay

) to place your orders. We apologize for the inconvenience and short notice. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

[FlexEdge] FlexRadio December Specials

of the discounted FLEX-5000 Bundles or a FLEX-3000 plus FREE shipping. You can order from the On-Line Store (http://flexradio.3dcartstores.com/) or via the telephone by calling 1 512 535-4713 Ext. 1 -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard

Re: [FlexEdge] CPU usage

32 or 64-bit operating system? If it is 64-bit, get up to 6-8 GB or RAM. If you are using a 32-bit Windows, 3 GB is essentially the max you can use. I suspect that there are other programs running that is consuming the CPU, like virus scanners, firewalls, etc... -Tim --- Tim Ellison

Re: [FlexEdge] Noise on 160M on Flex 3000

The 160m band pass filter has been switched out below 1.8 and above 2.0 MHz -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

Re: [FlexEdge] Noise on 160M on Flex 3000

To kill the noise, use the AGC-T (http://kc.flexradio.com/KnowledgebaseArticle50153.aspx) and the preamp attenuator. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t

Re: [FlexEdge] HAF-X and a Fast PC...

PowerSDR does not choose what cores its threads are run on. That is the job of the operating system. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t

Re: [FlexEdge] Truncation using FLdigi/FLarq and Flex1500 ?

. -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo On 12/14/2011 11:47 PM, James

Re: [FlexEdge] Software un-installer

This should do it. http://support.flex-radio.com/Downloads.aspx?id=387 -Tim --- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

[FlexEdge] Time is running out..

the On-Line Store (http://flexradio.3dcartstores.com/) or via the telephone by calling tomorrow only 1 512 535-4713 Ext. 1 Happy New Year to all! -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713

Re: [FlexEdge] FLEX 1500 + Flex control KNOB

This bug will be corrected in the next version of PowerSDR. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

[FlexEdge] PowerSDR v2.3.5 - Some new feature info

with the _BAK suffix appended to the file name. This is the 1st generation created when PowerSDR is shut down. -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t

Re: [FlexEdge] PowerSDR v2.3.5 - Some new feature info

When you get around to wanting to log these new feechers, http://www.flexradio.com/Support.aspx?topic=NewFeatures Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com

Re: [FlexEdge] PowerSDR v2.3.5 - Some new feature info

features or enhancements unless their release is imminent. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] PowerSDR v2.3.5 - Some new feature info

for instruction regarding the submission of feature requests http://www.flexradio.com/Support.aspx?topic=NewFeatures Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com

Re: [FlexEdge] PSDR not starting (3K)

Removing the software does not remove the databases. You probably need to delete your database. Hold down the left SHIFT key when starting PowerSDR. You should get an option to do a DB reset. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln

[FlexEdge] PowerSDR v2.3.5 New Feature Alert #6 - VAC sampling rate

rate to eliminate a sampling rate down conversion step between the radio and VAC or your digital mode program which improves the data stream quality. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535

Re: [FlexEdge] PowerSDR v2.3.5 New Feature Alert #6 - VAC sampling rate

Faster is usually better! Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo On 3/2

Re: [FlexEdge] PowerSDR v2.3.5 New Feature Alert #6 - VAC sampling rate

You don't. It is in Windows. You select it in the PowerSDR VAC setup - the Driver selection drop down Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems™ 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t

Re: [FlexEdge] So, is it a Date?

@ 12:01 AM ET Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo On 3/2/2012 11:11 PM

[FlexEdge] PowerSDR v2.3.5 is now available for download

business hours. You may always submit a HelpDesk support ticket at any time. If you need assistance opening a HelpDesk ticket, please refer to the following web page for detailed instructions. http://support.flexradio.com/ -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio

Re: [FlexEdge] First 60m digital mode QSO on Channel 3

Your QSL card will be in the mail later today :-) Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems™ 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

[FlexEdge] Dayton Hamvention 2012 FlexRadio Banquet

://cart.flexradio.com/Dayton-Banquet-Ticket_p_831.html -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] Flexa-Boom-a-Tron

Water is too messy for an effective coolant for the amps and beer kegs. Think liquid nitrogen. And the optional Flux Capacitor makes for a good backpacking power supply. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX

Re: [FlexEdge] New offerings

that want to enjoy the numerous benefits of SDRs, but may not be able to invest in the high-end FLEX-6000. We have PowerSDR v2.4.0 in development and hope to release it to our internal beta tester team in the near future. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM

Re: [FlexEdge] New offerings

This should have read... And I can see no reason why you *can't* run a FLEX-1500 and a FLEX-5000/3000 using two instances of PowerSDR and the FLEX-6x000 on the same computer at the same time as long as you have the resources and low DPC latency to pull it all off. Tim Ellison, W4TME Product

[FlexEdge] Announcing the end of the FLEX-6000 Limited Time Promotion on Aug 5th

distribution channel please contact your distributor to place your pre-order. A list of distributors and their contact information can be found at http://www.flexradio.com/About.aspx?topic=intldist -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln

Re: [FlexEdge] Signature Series upgrade and support question

No, you would not have to pay retroactively for the skipped years. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com

[FlexEdge] The end of FLEX-6000 Limited Time offer.

-- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo

Re: [FlexEdge] Slice Receivers and panadapters

relationship (whether or not a slice RX is actually shown in the panadapter spectrum view or not is TBD). Therefore there isn't a concept of a slice RX being outside of a panadapter, although you can hide a panadapter from view, but it is still running in the background. Tim Ellison, W4TME

Re: [FlexEdge] 6000 Series Antenna Questions

I need to clarify one of my previous statements. The RX signal path inside the radio does go through the ATU (if enabled) when ANT-1 or ANT-2 (transceiver port) is assigned to SCU-1. If using a FLEX-6700, this only applies to SCU-1. SCU-2 does not go through the ATU. Tim Ellison, W4TME

Re: [FlexEdge] PowerSDR v2.4.4 pre-release notice

It is not a beta release. PowerSDR v2.4.4 is an official release. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com

Re: [FlexEdge] PowerSDR v2.4.4 pre-release notice

The plan is to make the software available after I open up the FlexRadio East Cost Operations Center tomorrow morning (9/5) after getting a good night's sleep. Release day is always a busy one. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems™ 4616 W Howard Ln, Suite 1

[FlexEdge] Announcing the release of PowerSDR v2.4.4

for getting the quickest resolution to your issue. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http

Re: [FlexEdge] Announcing the release of PowerSDR v2.4.4

PowerSDR almost never resolves problems, since the database is what controls the radio and it is not removed when you uninstall the software since it was created after the software was installed. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150

Re: [FlexEdge] Announcing the release of PowerSDR v2.4.4

the Internet to clear this up quickly. Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo

Re: [FlexEdge] Computer requirements for 6000 series - Will Two Ethernet Cards work?

Steve, Strike 1. :-) Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems™ 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo On 10/20/2012 11

[FlexEdge] Windows 8 and PowerSDR 2.x

for your feedback. 73, -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo

[FlexEdge] The phones @ FlexRadio are back up

He have restored phone service. Sorry for the inconvenience. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web

[FlexEdge] FLEX-6000 featured in EDN Network.

EDN Network, a well respected electronics journals worldwide, has a very nice write up on the FLEX-6000 architecture. http://www.edn.com/design/analog/4401014/Social-media-meets-morse-code -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln

[FlexEdge] FlexRadio Systems US offices closed for Thanksgiving

The FlexRadio Systems US offices will closed on Thursday and Friday in observance of the Thanksgiving holiday. We will be back open for business on Monday. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone

[FlexEdge] PowerSDR v2.5.3 is now available for download

/Downloads.aspx?id=410 We hope you enjoy the new version of PowerSDR v2.5.3 and have a great holiday season. -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com

  1   2   >