Test
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/ Homepage:
I have recently issued 2 updates to my SDRDataTransfer.exe utility.
v1.5.0 -- Added a check to see if PowerSDR is running. If it is,
SDRDataTransfer issues a warning message telling you to close PowerSDR
then exits.
V1.5.1 -- Fixed a bug in the preview report. Under certain circumstances,
Hello guys,
I just love the new scope and Panascope feature!!! The display looks
just like a monitor scope My question is, how can I turn the scope
vertical gain down without effecting the receivers gain??? The vertical
gain is so much it goes off the screen or in Panascope mode it
Is there a way to reverse polarity, or even such a concept, when using the VAC
to provide audio to the Flex 5000? I have Skype connected to the radio through
VAC and on AM I see my negative peaks are much higher than my positive peaks.
If I saw this condition using the normal mike input to the
not sure but I do now that VAC allows you to select which 'virtual cable' is
Input and which is Output.
In my case
Input is Virtual Cable 1
Output is Virtual Cable 2
maybe reverse them? ?
- Original Message -
From: Harry Williams [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
comments, criticisms, additions, changes ??
HOW TO
INSTALL A BASELINE FLEXRADIO SYSTEM ON AN INTEL MACPRO 8
CORE XEON MACHINE
Ted Spiegel, NX6C
9/6/2008
Note: It helps to be familiar and comfortable
with both theMacintosh OS Xand WindowsXP Pro.
1. To
make a Windowsmachine on the
After bumbling through my XP-Pro books I can not find (again) how to fix a
program, from boot start up, and place it in one location on the screen
without having to move it there every time... I have multi-monitors but I
recall it worked for even single screens.
I am now really Happy with my FLEX-5000A. The PowerSDR and the FlexRadio
Firewire software play's a big step in this recent updates. And I connected
my Begali Paddle and I don't have the keying delay problem any more. I
don't need to make a DB9 connector for the Paddle. This is SUPPER.
Thanks to
HOW TO
INSTALL A BASELINE FLEXRADIO SYSTEM ON AN INTEL MACPRO 8 CORE XEON MACHINE
Ted Spiegel, NX6C
9/6/2008
Note: It helps to be familiar and comfortable with both the Macintosh OS X and
WindowsXP Pro.
1. To make a Windows machine on the MacPro with Boot Camp you MUST create a
complete
I am preparing to install the v34 RFIO board. I have already installed
the RX2. I already have all the Aug/Sep 1.14 software/firmware installed
and working.
In the HRFIO-34 installation guide (Pg 11, item 3), it states
Double left click on the HRFIO-34 EEPROM Updater application
Tom,
That is an update and I think that you still need to run it, even with
the new firmware, it won't hurt.
73,
Dudley
WA5QPZ
Tom Clark, K3IO wrote:
I am preparing to install the v34 RFIO board. I have already installed
the RX2. I already have all the Aug/Sep 1.14 software/firmware
Setup - Display -
- Spectrum Grid
- Waterfall
Set Low and High levels
Hope that helps
73 peter pa0pvn
groeten Peter websitehttp://www.homepages.hetnet.nl/~petervn/
https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=http://www.homepages.hetnet.nl/~petervn/
Normally it should remember it's last closed monitor and position on that
monitor.
Also try holding down the Shift Key when hitting the Red X.
It does work hereit always opens in the place it was closed.
Now it didn't ALWAYS work that way.
If you had PWSDR set to work on the secondary
Ray, K9DUR wrote:
I have recently issued 2 updates to my SDRDataTransfer.exe utility.
v1.5.0 -- Added a check to see if PowerSDR is running. If it is,
SDRDataTransfer issues a warning message telling you to close PowerSDR
then exits.
Thanks, Ray. I appreciate the idiot-proofing Hi
Dudley is correct. It is still required because it is an EEPROM update
(modification) and not a firmware update. They are very different in their
function.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dudley Hurry
Sent: Saturday, September
It is probably the video driver that is controlling the multiple monitors
causing the problem. Try upgrading the video driver to the latest version.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Saturday, September 06, 2008
Flex'ers, I need some help. I installed the new FireWire driver, Firmware
and PowerSDR
And I really like the improvements and all modes work, BUT PSK is
intermittent on TX.
I have tried every possible combination of sampling and buffer size (using
VAC) and no JOY :-(
It worked with v1.12.1, but
Val,
Setup the Firewire driver like this:
Sampling rate: 96K
Operation mode: safemode 1
Buffers:1024
PowerSDR Audio Setup
Sampling rate: 96K
Buffers: 1024
PowerSDR VAC Setup
Sampling rate: 48K
Buffers 1024
This works fine here with VAC 4.09
Don't worry about the larger buffer. This driver
Guys
I gave a demonstration of my Flex 5000 at a microwave club meeting today.
The radio was remote at my QTH and I demonstrated it on my laptop via VNC. Some
were interested but are waiting for at least 2 meter capability so they can use
it with their microwave transverters.
I heard a
It's one of the reasons I bought one, too.
Sure hope they still plan on making at least a 2M module available!
Jim KQ6EA
--- On Sat, 9/6/08, Jim R [EMAIL PROTECTED] wrote:
From: Jim R [EMAIL PROTECTED]
Subject: [Flexradio] 2 meter/70cm Transverter-scrubbed?
To: FlexRadioReflector
On Sep 6, 2008, at 8:42 PM, Jim Jerzycke wrote:
It's one of the reasons I bought one, too.
Sure hope they still plan on making at least a 2M module available!
Jim KQ6EA
For better or worse, I was also planning to buy the transverter when
it came out.
--
73 de Brian, WB6RQN
Brian Lloyd -
Ditto
Dave Beumer, WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian Lloyd
Sent: Saturday, September 06, 2008 9:59 PM
To: FlexRadioReflector
Subject: Re: [Flexradio] 2 meter/70cm Transverter-scrubbed?
On Sep 6, 2008, at 8:42 PM, Jim
I continue to have interest in buying a 2m transverter
Jim R wrote:
Guys I gave a demonstration of my Flex 5000 at a microwave club
meeting today. The radio was remote at my QTH and I demonstrated it
on my laptop via VNC. Some were interested but are waiting for at
least 2 meter capability so
23 matches
Mail list logo
