Hi
anyone can access to SVN repository ?
Stating yesterday afternoon the connection close with
connection closed unexpectedly
73 beppe
IK3VIG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
I fear that this is a question I should know the answer to, or is in the manual
somewhere, but...
I have a SDR1000 without 100 watt PA. I want to use the HF output at 28-30MHz
to drive a transverter. But I want to change the display frequency to show the
transverted frequency. So, using a
Most controllers send keystrokes to the program, which requires the program
to have focus. Space Navigator uses a device interface, which becomes part
of the program. Any device that uses a device interface can be added into
PowerSDR, but it requires custom code.
73 Ed W2RF
-Original
i should be able to answer this one but someone should verify it.
click the XVTR's button and assign button zero to the parameters you want
and LO offset if you know itdon't click xvtr rf tx at the end.
Then click VHF button front panel to find your created band.
make sure under general
Oh boy. The loaded what PC is best question :-)
Let me start with a caveat. Your mileage WILL vary.
In general, whatever you get today, unless it is a real low budget PC, should
work just fine.
As a rule of thumb, because PowerSDR is very mathematically computational,
processors with
I decided to upgrade from my Dell 8400 dual core PC to a new custom build. This
will be my station PC to also run my Flex 5000A. I like overbuilt systems that
are somewhat RF free.
Before I plop down $500-$600 on the components, I would feel better if some of
the gurus here would confirm or
Hi Joe,
Below is what I built for the Flex5000. All from Newegg. I also purchased a
PCI Firewire card and discarded it as the on-board firewire input was much
better. I know this is not the road you are looking at but maybe will help
in some way. Seems to work great for me! The video card is
I knew the answer would be that I was doing something stupid!!! I had clicked
the xvtr rf tx and that prevented it doing what I wanted it to do!
Many thanks Paul
David
Paul Radge pra...@tpg.com.au 21/04/2009 11:33
i should be able to answer this one but someone should verify it.
click the
Hi Tim,
My blog continues :)
I have had some success today and now have wsjt transmitting with no pops or
crackles from the old P4 3gig machine.
I found a picture online of someone's VAC set up and they had BPS 8 ,,,32 i
had i had 8,,,16 not sure what that is but i adjusted to 32
Excellent progress.
It sounds like you are on the right path. I'll be interested in the PC build
and how it all works out.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Paul Radge
Sent: Tuesday, April 21, 2009
DDUtil has failed. Was working fine and it shut the whole system. I rebooted
and everything works except ddutil. When I try to bring it up I get the
message:DDUtil has encountered a problem and needs to close Any suggestions ?
Art, K8JK
___
If I was shopping for a new machine today, I
would give serious consideration to this $600 4GB
Intel Quad Systemax screamer at TigerDirect:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4234804CatId=3423
- it has serial and parallel ports as well as
some empty
Paul,
Good progress and just goes to show that it can be done. As you push
the edge of system resources, all the timing in the SW becomes
critical. A simple change (as you found) can be the key.
That should be one nice machine once you have it built, be sure to let
everyone know
Seems to be working for me this morning. Might have been server maintenance
or something like that.
Eric Wachsmann
FlexRadio Systems
On Tue, Apr 21, 2009 at 3:13 AM, Giuseppe Campana gcamp...@telemar.itwrote:
Hi
anyone can access to SVN repository ?
Stating yesterday afternoon the
When I bounce back and forth from my email program sometimes my SDR will
stop and I will have to hit the stop and then start button to
get the SDR going again. Any suggestions for this fix? I'm running AMD
Athlon 3800+ Processor 64 x 2 dual core 1024 mb ram and Vista.NVidea 6150
graphics.
N4zvnED
You didn't say which version.
But I encountered an error like that. It was caused by my changing some
com0com settings on the fly.
If your using com0com or any other virtual port, did you make any changes?
- Original Message -
From: w8...@yahoo.com
To: flexradio@flex-radio.biz
Sent:
Ed,
Stop using e-mail :-P
If you have a DPC latency checker going when you do this, I suspect you will
see a very long duration spike. This is what is responsible the freeze.
In order to try and resolve DPC issues, update all of the drivers for your
hardware, including the motherboard
Art,
Make sure all port numbers in com0com begin with COM, or it will cause
DDUtil to crash.
This problem has been addressed in version 1.7.1.
73,
Steve K5FR
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Vista with only 1024 Mb of RAM? I only have 1024 Mb with XP and I wish I had
more. At a minimum, Vista needs double the amount needed for XP.
Carl WC0V
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Ed Helms n4z...@gmail.com; Flex Radio flexradio@flex-radio.biz
Sent:
Vista 64 needs 4 gig and Vista 32 needs 2 gig or it's going to be a slow,
frustrating go at just about anything.
73, Dale W4NBF
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Carl Vangsness
Sent: Tuesday, April 21, 2009
On Apr 21, 2009, at 11:37 AM, Dale Sewell W4NBF wrote:
Vista 64 needs 4 gig and Vista 32 needs 2 gig or it's going to be a
slow,
frustrating go at just about anything.
Do you realize just how insane that sounds? Vista is running the same
programs but requires twice the memory? The memory
But there is twice as much OS code in Vista over XP..
73,
Dudley
WA5QPZ
Brian Lloyd wrote:
On Apr 21, 2009, at 11:37 AM, Dale Sewell W4NBF wrote:
Vista 64 needs 4 gig and Vista 32 needs 2 gig or it's going to be a
slow,
frustrating go at just about anything.
Do you realize just how
By this time there should have been some Flex 3000s delivered out
there.. I will be monitoring 14.329 Mhz on 20 and CQ100 (same freq as
the Sunday Net)so if you would like to show it off or need some
assistance, go to 14.329. Twenty meters is not real good right now,
but give it a
Thanks Dudley...mine is being delivered tomorrow!
73,
Jim
- Original Message -
From: Dudley Hurry jhu...@austin.rr.com
To: FlexRadio reflector flexradio@flex-radio.biz
Sent: Tuesday, April 21, 2009 3:23 PM
Subject: [Flexradio] Monitoring 14.329 for Flex 3000s
By this time there
On Apr 21, 2009, at 12:12 PM, Dudley Hurry wrote:
But there is twice as much OS code in Vista over XP..
You make my point for me. My point is that Vista does nothing
substantive over and above XP yet has twice as much code. The basic
job of the OS has not changed at all. It provides a
Dudley,
Has Flex given any thought to using 40m instead of or along with 20m as a get
together frequency?
Dennis Petrich
Amateur Radio Station K0EOO
Lakeville Minnesota USA
k0...@arrl.net
952-898-1082
- Original Message -
From: Jim Kunowsky k4e...@verizon.net
To: Dudley Hurry
Super, check in on 14.329 if you get a chance.
73,
Dudley
WA5QPZ
Jim Kunowsky wrote:
Thanks Dudley...mine is being delivered tomorrow!
73,
Jim
- Original Message -
From: Dudley Hurry jhu...@austin.rr.com
To: FlexRadio reflector flexradio@flex-radio.biz
Sent: Tuesday, April
Since MS wants to stop supporting XP soon mainly due to Win7's arrival, has
Flex been testing with any versions of Win 7? Like it or not, many will be
using Win 7 soon enough. (I personally like Ubuntu).
Joe
www.wc4r.com
www.WilliamsburgWX.com
Date: Tue, 21 Apr 2009 14:12:53 -0500
Well, it makes Micro$oft a lot more money!
jim KQ6EA
--- On Tue, 4/21/09, Brian Lloyd brian-wb6...@lloyd.com wrote:
From: Brian Lloyd brian-wb6...@lloyd.com
Subject: Re: [Flexradio] Program stopping
To: Dudley Hurry jhu...@austin.rr.com
Cc: FlexRadio@flex-radio.biz
Date: Tuesday, April
There has been some cursory testing, but nothing substantial will happen until
it is released.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Joe Roth
Sent: Tuesday, April 21, 2009 3:55 PM
To:
Yep, that's the whole idea. No new functionality or improved stability
since Win 2000 as far as most users are concerned, but look at the
revenue stream. Not a bad game if you can get away with it. I'm using
XP now, but once the new architecture comes out, I'm on OS X with
everything and if I
Dudley Hurry wrote:
By this time there should have been some Flex 3000s delivered out
there.. I will be monitoring 14.329 Mhz on 20 and CQ100 (same freq
as the Sunday Net)so if you would like to show it off or need some
assistance, go to 14.329. Twenty meters is not real good right
I think Flexitis is an excusable (but contagious) illness that effects us at
least twice a month : )
Of course, Newbie Flexitis (those who have just recently been exposed) hits
hard during the first month of exposure!
Joe
www.wc4r.com
www.WilliamsburgWX.com
Date: Tue, 21 Apr 2009
Hi All
I have the Flex-1500 pre-ordered so I am not QRV with a Flex radio yet
but I heard a few weak stations in the noise on my TS-570D earlier today
before I had to go deal with a partially flooded basement and a backed
up drain. I'll keep listening for calls in that frequency.
It's too bad
I would like to set up my 5000 that has an RX2 and the latest HRFIO to the
following;
Antenna 1 is hooked up to a SGC-239 remote tuner for all HF bands.
Antenna 3 is hooked up to stacked 6 meter loops and I have a DEMI preamp on the
RX1 RX2 BNC ports on the 5000
Is it possible to
Affirmative to goodbye to MS!
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of k4...@fastmail.fm
Sent: Tuesday, April 21, 2009 4:57 PM
To: Flex
Subject: Re: [Flexradio] Program stopping
Yep, that's the whole idea. No new
The only options for the RX2 is ANT-1, RX2-IN and the RX1-TAP.
Why not put the HF on ANT-2 or ANT-3 and put 6m on ANT-1 and use the RX loop
for the preamp?
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Just wait until you get Flexitis with reoccurring chronic updatus SVNus. :-)
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Joe Roth
Sent: Tuesday, April 21, 2009 6:45 PM
To: Flex Radio
Subject: [SPAM] Re:
And it makes more money for the manufacturers of the hardware: every
upgrade of Micro$$$oft software requires more disk space, more memory
and a faster CPU. It's an incestuous relationship.
Alan NV8A
On 04/21/09 04:05 pm Jim Jerzycke wrote:
Well, it makes Micro$oft a lot more money!
But
Tim's suggestion is what I've done at my station. I too would have prefered
setting up RX2 as the 6M receiver. However, since the preamp is connected
to the RX1 in/out ports, you need to use RX1 for 6M. Unfortunately, using
RX2 for the HF bands is not as convenient as RX1.
I know of no
One other advantage of having RX2 on ANT-1 is that you can do SO2R. You can
choose which VFO (RX1 or RX2) to set the TX oscillator so that you can switch
back and forth easily using the front console controls.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
Hello Flex Forum,
Subject: Ideas for providing an ALC input from Linear Amplifiers for
the Flex 5000 and other FLEX radio products.
“Normally”, ALC (Automatic Level Control) for a ham radio linear
amplifier has been provided by having an analog output of the linear
amplifier and a mated
Steve, K5FR of DDUtil fame is building a software driven FlexWire ALC widget.
http://flexwire-adapter.blogspot.com/
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Joe Mehaffey
Sent: Tuesday, April 21, 2009 11:30
43 matches
Mail list logo
