My MixW receives and puts out if I manually key the 5000, but what once worked,
the PTT no longer does, why?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Interesting. I would recommend contacting the VAC folks and ask them about
Win7 compatibility. We all would like to know if it is going to work correctly
or not.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
If you are using PowerSDR v1.18.0, there is a bug that prevents CAT TX command
form working correctly. It is fixed in the SVN trunk version and will be in
the next released version of PowerSDR.
-Tim
-Original Message-
From: Burt [mailto:k1...@yahoo.com]
Sent: Thursday, June 04,
I didn't think it was on my Win7 x64.
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Thursday, June 04, 2009 7:14 AM
To: jmb...@teaser.fr
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] General
Is there a version that has the CAT command fixed AND supports x64? It seems
that the ones that I've tried don't like the x64.
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Thursday, June 04, 2009 7:19
It costs nothing. It is an exposed AF and I2C bus interface for FlexWire
peripherals. At this time there are none available, but several people are
working on some.
-Tim
From: brahman...@aol.com [mailto:brahman...@aol.com]
Sent: Wednesday, June 03, 2009
I have got to agree - at least a little bit. My mailbox runneth over with
Flex every day lately. Tempted to unsubscribe, but I don't want to miss any
of the really valuable information that many post - I don't have a lot of
interest in the 3000 which seems to be the big focus since they started
The SVN TRUNK version works with Windows x64 operating systems, but you have to
load .NET 1.1 + the service packs. Win7 is not currently supported as they
have a Firewire issue that requires loading the older legacy 1394 driver.
-Tim
-Original Message-
From:
Jim
Yes there is a low power transverter port on the back of the 5000 that I use
with my 222 transverter. Can't remember the exact power, maybe a mw, but it
is there and works just fine.
73
Al W5LUA
-Original Message-
From: flexradio-boun...@flex-radio.biz
There is a workaround I've used with MixW and PowerSDR v1.18.0. Create a
second set of null-modem com ports and configure the Secondary PTT Port to
use that com port pair.
-Dave
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Burt k1...@yahoo.com
Cc:
That is only for the 28 MHz IF (@ 0 dBm) not the 144/440 MHz IF that the V/U
Module can supply.
-Tim
-Original Message-
From: Al Ward [mailto:w5...@sbcglobal.net]
Sent: Thursday, June 04, 2009 9:29 AM
To: 'Jim R'; Tim Ellison; se_on...@hotmail.com; 'FlexRadioReflector'
Subject: RE:
Tim
Jim mentioned external transverters which are all 28 MHz or 144 MHz IF
generally.
Al
-Original Message-
From: Tim Ellison [mailto:telli...@itsco.com]
Sent: Thursday, June 04, 2009 2:01 PM
To: Al Ward; 'Jim R'; se_on...@hotmail.com; 'FlexRadioReflector'
Subject: RE: [Flexradio] [SPAM]
While we can't really do something like this on the server side, this is
pretty much what happens with the gmail client due to the conversation
view. I highly recommend using a client that has a conversation view along
with filters to keep list traffic separate from your usual inbox.
Eric
With all the talk of DPC, performance, etc, and various solutions prompted
me to try and increase my computer performance. Anyway, somehow the CPU%
indicator has disappeared. I ran exctrlst.exe recommended in the KB CPU %
Utilization does not show up on PowerSDR console, and restarted the
At least with DM780/F3K I found using the second virt com port pair
keyed much more consistantly, using the single pair would cause my
setup long delay in key-up and un-key.
-Larry
On Jun 4, 2009, at 6:48, Dave Burnett burn...@dakotacom.net wrote:
There is a workaround I've used with
I want to thank everyone for their comments on my questions from the other day.
After the answers I received and speaking with Eric at Flexradio we
determinded that the FLEX 3000 would fit the bill for my casual operations. I
will be replacing my ICOM 756 Pro II with the flex.
What a
To help sort out the 3000 vs. 5000 messages, early on I just created a
mailbox filter and have separated messages for the two radio models. Works
great for me. Box1 = 3000, box2 = 5000, and a default for all others.
Most people (should and do) type in either 3000 or 5000 in the subject line.
You
Robert, this is what happened here as well about 10 days ago. I don't
know why; it still works in Task Manager. It's not important, but
strange. It has gone the same time in all PowerSDR versions I am using:
v1.18, v1.19_SVN, PrettyBetty, KD5TFD's hpSDR version.
???
73, Hans, DL2MDQ.
A Microsoft update, no doubt.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of hartfuss
Sent: Thursday, June 04, 2009 11:32 AM
To: k...@vhfdx.com
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Lost CPU %
Concerning the Vac setup on the F5K to Mixw its most often
a problem of using wrong DIGL, DIGU offset settings.
Therefore I am using mostly only USB amd made my own
TX profiles for different use like SSB or Digimodes
Because when using the wrong default DIGL DIGU Offset the
Mixw Waterfall
Tim
I have the latest Windows 7, 32Bit Version ins use here, and it works great.
Much better then with Vista. Its comparable to W XP, and let you install
older
drivers needed to run different Cat and Vac programms.
Windows 7 has a fanastic way to check and install older programms or
drivers.
I
The problem with using USB/LSB for digital modes is the signal processing
options that can be enabled causing poor transmission quality, such as the EQ
and the Compander.
If you are getting the wrong frequency reading in MixW with digital modes, it
is because you probably do not have the CAT
I have DXLab talking ok to Commander. And in WW it is decoding PSK. However
when I try to transmit PSK the WW
display looks like it is transmitting but the 5000 never goes into TX even with
the Drive at 100 watts and TX Gain at 40.
BTW I am using DDUitl and have DXLab on RCP1 CAT.
Re K5HY's message, I reiterate my comment made at the session at Dayton. The
transverters should have one high power output (25 -50W) and ALSO a low
power output (1 - 5) to drive tower-mounted microwave transverters. I have
been told that the low power output will be 1 milliwatt, which in no way
Hello Bill and others
Since I have borrowed N5AC's Flex-3000 and put it on 6M, I decided to use my
Flex-5000 on 2 VHF bands. Normally RX1 is on 6M and RX2 is on 222 or any
other transverter band I choose. Now I decided to leave RX2 alone with 222
and use RX1 on 432 MHz and use the high power
Hello
Well maybe there is a hardware limitation in that RX2 has some limitations
in that it can only connect direct to ANT1 it appears, other modes are
RX1tap or RX2 inputstill some possibilities.
It would be nice to be able to have the 5000 with external receiver running
on two external xvtr
I am using an Acom 1000 with my F5K. I am keying the amp with Am Key TX1.
In order to not get an arc fault on the amp, I have to set the the delay for
TX1 to about 100 msec. I am also running break in CW with the break in
delay set at 75 msec. When I listen to my signal on another receiver,
Yes. Version 1.18.0 has a bug where the CAT TX commands does not work
correctly. It is fixed in the SVN Trunk (where all bug fixes live) and will be
included in the next released version of PowerSDR.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
I have been asked what this is over and over. I will let someone with a
better voice tell you:
http://w9oy-sdr.blogspot.com/2009/05/wbir.html
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hello
I`ve ordered mine in 11/2008 and I wonder if shipping (fulfilling EU
pre-order sales) is anywhere close to begin?
Regards, Joe
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Whoopee Just got notification from UPS that my 5000A will be here Monday
going to be a lnnng weekend...LOL. Hope they ship the mic I ordered
right after I ordered the rig, but that's ok...Love CW.
Sorry for the bandwidth and adding to the flex finger, but hey I am
excited!
73
Hi Carl:
There are settings that need to be changed and also there is recent work. I
suggest you and all other CW ops go ahead and download the trunk using
tortoise svn. you do not need the entire trunk, just the bin/Release
directory.
Several updates are in there but they include:
1) Major
How do I get an older release of PowerSDR from the svn server? I am
setting up a new computer for my new F5k and downloaded what I
thought was the entire repository, but now I see it appears I only
have the latest versions of the various branches.
In particular, I need n4hy's svn release 2798
Hey Tom AC5TMbenefits of being retired, PLAY RADIO !!! :)
73,
Leon, N5PU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Previous versions of the code are never kept on your local PC, that is what the
SVN server is for.
Open the SVN log, pick the SVN level you want to revert back to and right click
on it. Then select revert to this revision.
-Tim
-Original Message-
From:
I may have lucked out with this bug. I set up my F3K and it seems to be
working fine with PSDR 1.18.0, receive and trasmit. I'm using
DXLabs/Winwarbler. Not knowing any better, I configured PTT to use RTS
and CTS on both sides, and that did the trick.
Now figuring out the operating practices
This is cool!! Apparently what I saw just b4 the end of May was a fault
caused by downloading an older data base. I didn't get to investigate it
as I sent my rig back for a minor repair that same day. My rig is on its
way back, so we shall soon see--.W8XO
Robert McGwier wrote:
I have been
Hi All,
Having read about all the challenges some have had with firewire I was curious
to see how much I would get challenged myself as I progressed from my SDR-1000's
to the Flex series.
So here's the experience I have had so far:
As my stationary computer I am running a 2003 vintage MSI
I have a sdr-1000 was packed away,have a 5000a , decided to set it back up,
tweek it and was going to give it to one of the kids in the local club,who got
his general but can't afford a radio. Here is the problem Iam having. the noise
floor on the 1000 is at S-8 with the antenna connected,
Did you do a level calibration on the SDR-1000 or just a frequency
calibration (or both)? You didn't say which one.
Check the audio cables too (to line out).
-Tim
---
W4TME
FlexRadio Systems - Info Management Admin.
Tune in Excitement
On 6/4/2009 5:23 PM, y...@aol.com wrote:
I have a
Another thing to think about is that AOR, with their Digital HF also uses the
AMBE chip. I believe that it is knocked down to a lower transfer rate, but it
is the same chip. So it could be possible to kill two birds with one stone with
an AMBE implementation.
http://www.aorusa.com/ard9800.html
Thank goodness your not a woman, you would have to include makeup in that
routine
73 W9OY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Hello Carl,
I'm not familiar with the Acom 1000 amp, but it has been my experience
that the FLEX-5000 works exceptionally well on CW. I'm running mine with
an Ameritron AL-811H amplifier and the Ameritron QSK-5 QSK unit, which
is being keyed from the Amp Rly TX1 port as well, but with no
Greetings to the Flex list:
I am 3 weeks into my SDR experience with a 5000A. All is well so far
and I am experiencing renewed interest in Amateur Radio. However, I
would like to know a lot more about the internals of this beast (the
collective beast consisting of hardware and software).
Need someone to do a test for me on their computer.
1) Launch the Flex Fiurewire driver and run on Enable DPC Latency checker
2) Launch your web browser, FireFox 3.0.10 would be helpful as that is what I
am running as my main browser.
3) Go to Gmail, if you have an account and you have auto
I too,have lost the CPU window at the bottom left of the PowerSDR
Pretty Betty Blue2 screen. I have not had the computer attached to
the internet, so Microsoft updates is not the answer. the last
update was when I downloaded .net 3.5 before loading Pretty Betty
and 1.19. Can anyone else
I don't know about Gmail, but MS Outlook, when it receives mail does something
that results in really long duration DPCs on my XP x86 system. My issues is
probably disk I/O or network based. Your issue is probably network based. You
can try upgrading the NIC drivers.
The fix? I don't run
Tim
So if you forget, and actually use web based mail, do you get drops from your
receiver?
But indeed not going to GMAIL would solve the problem too.
Cheers
From: telli...@itsco.com
To: se_on...@hotmail.com; flexradio@flex-radio.biz
Date: Thu, 4 Jun 2009 22:19:17 -0400
Subject: RE:
My web based e-mail client is the MS Exchange OWA client running on IE. I
normally do not use it, but when I do I don't have any significant problems
with it.
Do you have any scanning software that interrogates HTML data streams (virus
scanners, firewalls, spyware checkers, etc..) That could
Leon
I've had mine 1-1/2 years now and the best part is that the excitement never
ends.
Jim
K5HY
Date: Thu, 4 Jun 2009 14:20:48 -0500
From: stor...@cableone.net
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] 5000
Whoopee Just got
As mentioned in a previous post my transmitter wasn't.
I found by accident that if I power off the radio and power it back on while
powersdr is turned off, and then turn powersdr back on things work properly.
That is to say, if the radio and powersdr are turned off, and then the radio
51 matches
Mail list logo