Are you using the same version of HRD and PowerSDR as you were with the
SDR-1000?
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Paul Delaney
Sent: Tuesday, August 11, 2009 11:56 PM
To: flexradio@flex-radio.biz
Today I can say the same as you did Tim.
Yesterday Fldigi on my Flex 5000 A worked, but today it doesn't.
Where can I find the info on setting up MixW for Flex 5000 A?
/Erik
Hi Tim.
Thanks for the information. I have it running now. I followed an
article I found on a Google search made by
There is a partial example at the end of the VAC setup article in the KB
http://kc.flex-radio.com/KnowledgebaseArticle50230.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Erik Jakobsen
Sent: Wednesday, August
Thanks again Tim.
/Erik
There is a partial example at the end of the VAC setup article in the KB
http://kc.flex-radio.com/KnowledgebaseArticle50230.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Erik
Paul,
There are some Com settings in HRD that you might adjust to see if it
helps with the lag. In the Options menu of HRD, Comms menu I have the
refresh interval set at the lowest and Read timeout set to 50ms, but
this will vary according to the speed of your computer and how you may
Paul,
I have the same lag with HRD ver. 5.0 beta. Others have also reported this
lag and about one month ago Simon posted that he was looking into this
issue. For PTT with DM-780, I suggest PTT by comport, rather than PTT by
software command. I know some have resorted to using two physical
FWIW I see no lag with Eltima virtual com port driver, PSDR 1.18.2 and
F3K. Lag and hang with com0com and vcom.
-Larry
On Aug 12, 2009, at 8:31 AM, John Sweeney n...@comcast.net wrote:
Paul,
I have the same lag with HRD ver. 5.0 beta. Others have also
reported this
lag and about one
I believe that the problem with HRD has always been identified as a problem
with some of the virtual serial port software packages. The Eltima driver has
always worked very well. The only complaint is the cost for a signed driver.
-Tim
-Original Message-
From:
See:
http://folding.stanford.edu/
Someone placed the software on your computer without your knowledge or you
downloaded and clicked the .exe file by mistake.
Brian
Jim wrote:
Hey Folks!
I am not computer savvy but know enough to look at task manager.
I just discovered that with no
to all,
before put your money in Eltima driver...try VSPE (Virtual Serial
Port Emulator),
it works very fine with me: PowerSDR + Tmate + HRD + Expert 1KFA amplifier.
Make one port connector type as comX
Make one port splitter type as comY (referred to comX)
On PowerSDR select comX as its
Be careful with the 8400 as this was one of a number of PCs from Dell that
experienced the capacitor failure - where the top of the cap pushed up and was
no longer flat. apparently they were using a bad batch of caps on their
motherboards. I had two of the 8400s and I just recently trashed
Thanks Dudley,
And thanks to all who replied, those settings you suggested were an
improvement.
I will look into the Eltima driver also, thanks for that tip!
Paul Delaney
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
k...@k6hr.ampr.org
Paul,
There are some Com settings in HRD that
On Tue, Aug 11, 2009 at 2:40 AM, Erik Jakobsene...@urbakken.dk wrote:
I try to set up Fldigi on my F5KA radio, but I have issues.
Here is the latest part from the fldigi-alpha mailinglist, where I have
asked for help.
Eric,
I have had problems with portaudio in the past but that problem
Hello Beppe,
Thanks for this suggestion!
I have downloaded VSPE and will give it a try!
Thanks also for your work on Pretty Betty!
Paul Delaney
paul.hamra...@verizon.net
k...@k6hr.ampr.org
http://k6hr.dyndns.org:8080
to all,
before put your money in Eltima driver...try VSPE (Virtual
Brian Lloyd wrote:
On Tue, Aug 11, 2009 at 2:40 AM, Erik Jakobsene...@urbakken.dk wrote:
I try to set up Fldigi on my F5KA radio, but I have issues.
Here is the latest part from the fldigi-alpha mailinglist, where I have
asked for help.
Eric,
I have had problems with portaudio in
Yes, I just deleted the wisdom file and started with the 5000A
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Paul Delaney paul.hamra...@verizon.net; flexradio@flex-radio.biz
Sent: Wednesday, August 12, 2009 4:04 AM
Subject: RE: [SPAM] [Flexradio] 5000A and HRD
Are
Happened to find a package on my front porch this afternoon.
A very nice plague from the Staff at Flexradio.
Sort of appropriate that the plaque used an image of the 'Slinky' as my
first antenna was a Slinky/dipole. Stretched my slinky-dipole out at at
night so I could listen on my Knight Kit
Don't open the package - plague killed millions in the middle ages -
look it up on wikipedia for more info.
Jerry W4UK
At 03:59 PM 8/12/2009, FireBrick wrote:
Happened to find a package on my front porch this afternoon.
A very nice plague from the Staff at Flexradio. snip
ObvioulsyI didn't get this for my 'proof reading' skills.
Thank god.
--
Pretend to spank me. I'm a pseudo-masochist!
--
TOWER/WEBCAMS and Weather Page
@
For some time now I've been seeing a dramatic reduction in RF power output
on the meter. I seem to be driving my linear to a reasonable level when I
use it which indicates to me that it's more of a meter function that actual
output, but when I put the 5KA in the tune position it indicates 3 watts
For some time now I've been seeing a dramatic reduction in RF power output
on the meter. I seem to be driving my linear to a reasonable level when I
use it which indicates to me that it's more of a meter function that actual
output, but when I put the 5KA in the tune position it indicates 3 watts
I've been seeing the same thing here for a while on my 5000A, although I'm
not sure exactly when it started. According to my PowerMaster wattmeter,
the output power is fine but the PowerSDR wattmeter is reading low. I'm
running the latest versions of the software, firmware and driver (1.18.2,
You may need to do a bias and power calibration. It only requires a 100 watt
dummy load.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Clay W7CE
Sent: Thursday, August 13, 2009 12:05 AM
To:
Try resetting your Database before you do any adjustments, I have seen this
problem and just reset my Database and it started reading fine.
Bret
WX7Y
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent:
24 matches
Mail list logo
