Brian:
Many thanks for these detailed instructions. I've been postponing the setup
attempt for months, wanting to keep from screwing up the Flex 5000. Now, no
more excuses
Pierce
W4ZDI
- Original Message -
From: Brian Lloyd brian-wb6...@lloyd.com
To: FlexRadio reflector
By field day 2010 would be very nice.
-Larry
On Dec 31, 2009, at 3:27 PM, Brett Gazdzinski brett.gazdzin...@verizon.net
wrote:
I think its not going to make it...
Brett
- Original Message - From: Jim pywac...@fuse.net
Cc: flexradio@flex-radio.biz
Sent: Thursday, December 31,
Is anyone else having troubles with K9DUR Voice Keyer
3.1.1
I install the directx requirements, and the dot net requirements, however on
startup its just a plethora of errors.
Ive tried on windows XP SP3 (32bit) ive tried on Windows 7 x64, ive even
asked another HAM friend to try on Vista x32
Hi John,
DDUtil can control virtually any kind of device using the parallel port.
Please see the following link for information on setting it up. If you have
additional questions please address them to the DDUtil Yahoo Group.
The purpose of the preamp is to improve the signal to noise ratio.
If you engage the preamp, the noise floor goes DOWN and the signal level stays
the same. Remember that when you engage the preamp, you have not changed the
signal level at the antenna terminal. You have, however; improved the
Hi SDR friends,
First of all, happy new year to every one, with lot of sun spots in 2010 !
I want to let you know that Simon, author of HRD, has released a version of
his work on SDR console. It works nicely with the receiver SDR-IQ for the
moment, and you can test the software even if you
Dan,
Tim just gave the exact explanation. This behavior seems weird the
first time because we all are used to the common S meter which is
really a bad implementation of a level meter in all classical
communications receivers that I know. The Flex radios really are also
measuring
Happy New Year!
I just upgraded from a SDR-1000 to a 5000A this week and have been playing with
it a bit. It seems to be working fine but I have distroted rcv audio after a
few minutes of running. I have the latest firmware and software loaded and I've
tried a bunch of different buffer
Just like Harry, I have had this problem for the last two releases.
Hopefully it will go away as the software continues to improve.
73 and Happy New Year
Hank Wolfla - K9LZJ
hwol...@comcast.net
317-861-0186
---
Message: 1
Date: Thu, 31 Dec 2009 14:51:55 -0600
From: Harry Williams
John,
Have you looked into Steve WIKI page at the info there?
http://k5fr.com/ddutilwiki/index.php?title=Main_Page
Just not use the BDC section. If still not able to get it to work, you
might contact Steve, K5FR, directly.
73,
Dudley
WA5QPZ
John Vandenberg wrote:
I am building a
Try reloading .NET 3.5, SP1 framework. This has helped some.. Also
make sure the FireWire Buffer and the Audio tab buffer are set to the
same value, 2048 is the default.. You may also need a different
Operational Mode too.
73,
Dudley
WA5QPZ
de...@earthlink.net wrote:
Happy New
I've been using a Compaq 1.8Ghz with 500m of ram for my SDR-1000 for about 3
years. I'm beginning to notice issues with later versions of PwrSDR lagging or
not even working with CW break-in enabled. I've reloaded each version
including 1.18.3 with the same symptom. Version 1.14 works
Wishing all the warmest holiday greetings.
2009 was a fun year and I'm expecting 2010 to be even better.
Contesters, stay tuned for a cool new DDUtil feature to be announced soon.
HNY 73,
Steve K5FR
___
FlexRadio Systems Mailing List
George,
I would say to make full break in work with 18.3 you will need more
horsepower on the computer side, you are currently on the under side of
the posted requirements, not to say that you can't make it work, but
Flex would recommend that you have a little additional CPU power in
If you can save a dump if it happens again, I'd be interested in
checking it out ..
Hardware config (processer, memory , etc. ) ??
Anthony M wrote:
I don't have the dump sorry,
But I was running DM780, VAC, HRD, HRD LOGGER, PowerSDR, VSPmanager,
Google Chrome and a few other things..
Now guys, I am going to propose that you are in some state of mass hysteria.
Being someone who has passed his 70th birthday some time ago the term BSOD
was not in my vocabulary although I was familiar with a couple of those
letters
And I guess I missed the note where this was defined. So
Greg,
My 5000 started to do this when I upgraded to the latest firewire driver.
Prior to the upgrade, a burst of intense disk activity, like when my
anti-virus program starts a scan, would cause PowerSDR to freeze. A simple
stop and start would correct the problem. With the new firewire driver,
Lee and others,
If you want to see what BSOD (Blue Screen of Death) in a Windows
machine really looks like, check out this WIKI page.
http://en.wikipedia.org/wiki/Blue_Screen_of_Death
Lee - In your case, I would look at updating the video card driver or
the video card, but the system
Thanks who all responded. I figured out it was my external Linksys Wireless
connection LAN device that was causing the latency problem. It has a USB
connection which I tried a few other ports without luck. Now I need to figure
out a way to get wireless signals without causing havoc on the
You can set the taskbar to auto hide maybe !? (in taskbar properties)
FireBrick wrote:
Sorry but I've searched the web, and I 'SHOULD' know the answer but I
can't find it.
I have dual monitors, each with different resolutions.
For some reason, I can grab a window title bar, and push the
Great! Thank you both for the explanations. My understanding of preamp
was based on when I was working in a recording studio 30+ years ago. I
had audio preamps that worked more linear. Ok in a audio studio but not
good on stage.
EB4APL wrote:
Dan,
Tim just gave the exact explanation.
Hi name Larry I live in Prunedale California just north of Salinas. I'm
looking for someone that lives near here to give me some help .
Larry
KE6PPE
_ke6...@aol.com_ (mailto:ke6...@aol.com)
___
FlexRadio Systems Mailing List
I'm getting ready to try out a 222MHz transverter with my Flex 5000A
(PowerSDR 1.18.3, Firmware 1.3.0.8, Firewire Driver 3.5.0.7171). I've
programmed the XVTR settings for a begin frequency of 222.0 and an end
frequency of 225.0 (LO = 194 MHz). I'm getting Out Of Band whenever I go to
23 matches
Mail list logo
