[Flexradio] SDR-1000 X2 External Control connector question

There are seven open collector control pins that can be configured with the External Control Tab to go logic high on either transmit or receive depending onhow youm configure them. I am seeing + 0.6V whenhigh. Is that correct? Doug K4LY ___ FlexRadio

Re: [Flexradio] SDR-1000 X2 External Control connector question

I think they are talking about TTL logic levels - read up on TTL transition levels on google. IIRC, HIGH is maybe 3-4V. Jerry W4UK At 02:38 PM 1/12/2011, Doug Allen wrote: There are seven open collector control pins that can be configured with the External Control Tab to go logic high on

Re: [Flexradio] SDR-1000 X2 External Control connector question

Doug, As you noted, the X2 outputs are open-collector. Logic High turns the transistor on, which will result in a collector-to-ground voltage of a few tenths of a volt. Logic Low turns the transistor off, resulting in the collector voltage rising to whatever the pull-up voltage is in the device

[Flexradio] fldigi error

I am suddenly getting an error when I start fldigi, although fldigi seems to still work after the message noted below (although I could only find CW this morning). Here is a re-write of the event log, since the image of the log was rejected by the moderator I: testCommPorts: Found Serial

Re: [Flexradio] fldigi error

What software and version are you using for the virtual com port pairs. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Gary Warner Sent: Wednesday, January 12, 2011 3:57 PM To: FlexRadio@flex-radio.biz Subject:

Re: [Flexradio] fldigi error

Tim, I am not home with that computer, but it is the version that Steve Nance sent me on 1/2/2011-the file properties of the setup file say that it was modified in 10/30/2009 . The pdf file that is included in the zip file says VSP Manager by K5FR- Version 1.0.1.006. Gary On 1/12/2011

Re: [Flexradio] fldigi error

On Wed, Jan 12, 2011 at 12:56 PM, Gary Warner garyw...@gmail.com wrote: I am suddenly getting an error when I start fldigi, although fldigi seems to still work after the message noted below (although I could only find CW this morning). Here is a re-write of the event log, since the image of

Re: [Flexradio] fldigi error

Hi Gary fldigi did not find the cat comm pair you are using. Double-check that it is indeed defined as well as being used by PSDR. Could there be another program running that owns Com6-16? 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 On Wed, Jan 12,

Re: [Flexradio] fldigi error

Neal, I am going to double check tonight by re-booting the computer and then just starting SDR and fldigi to see if the error goes away. If it does, then there is some residual service left running when HRD is closed. HRD does in fact use that port when it is running, but it is not on at

Re: [Flexradio] fldigi error

You may just want to use a unique port pair for Fldigi -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Gary Warner Sent: Wednesday, January 12, 2011 7:29 PM To: Neal Campbell Cc: FlexRadio@flex-radio.biz Subject:

[Flexradio] NOD32 and System Protection

Hi all, I know Neal uses NOD32 as a product on his website for the Flex Optimized computers he sells, so I was thinking of putting that on a new laptop I recently got. But, does anyone have any comment on their version of anti-spam / anti-malware software they also sell as a package? (EST

[Flexradio] Which Firewire Vendor

Hi folks, Here is a cut n paste from the System Scan from the Flexradio Driver. The lucent FW card has been removed but still shows up. My question is which would be the better FW card to use? Or would it make no difference. Cheers, Dave. 1: Vendor : (1106)

Re: [Flexradio] Which Firewire Vendor

Try the Lucent card first. It has a greater number of max isochronous RX contexts. If it doesn't perform well, use the VIA -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of David Walker Sent: Wednesday, January 12,

Re: [Flexradio] Which Firewire Vendor

Oh yeah. One other thing. Make sure you checked all three boxes when you did the scan to ensure to get the latest compatibility list downloaded from the Internet. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of

Re: [Flexradio] Which Firewire Vendor

Thanks Tim, Yes I saw the isoch 8 versus isoch 4 but didn't know what it meant so that's why the post for advice. All boxes were ticked when i performed the scan. I notice with the VIA onboard FW card I do not notice any latency on CW transmit. The latency checker maxes out at 22u sec and

Re: [Flexradio] fldigi error

I went home and rebooted my computer. Then I tried to open SDR, and it would not open. I tried and tried to open it, and it simply would not do so. I then ran the SDR setup again and did a repair of the SDR installation. Once that was done, everything worked fine- both SDR and fldigi.