Hi All,
1) The gentleman who suggested FAROS, this is a very good application
but it does not cater for the Flex.
2) Dave - I use the DXLAB suite for logging and have done for some time
now. However, whilst it is capable of doing all that you have stated, I
still cannot do what I want. I.E.
It's a while now since I used Faros, but I definitely did have it
operating with my 5K.
73
Alan NV8A
On 01/26/11 03:57 am, Gwyn Williams wrote:
1) The gentleman who suggested FAROS, this is a very good application
but it does not cater for the Flex.
At 03:57 AM 1/26/2011, Gwyn Williams wrote:
Hi All,
1) The gentleman who suggested FAROS, this is a very good
application but it does not cater for the Flex.
FAROS works perfectly for my FAROS and PowerSDR (the Flex software)
installation using Rig Type = Kenwood
Kenwood is the radio type
Al
You can use DDUtil to do this.
www.k5fr.com
There are also some serial port splitters available.
Dave
W0DHB
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Al Zaba
Sent: Wednesday, January 26, 2011 6:05 AM
To:
www.eterlogic.com is what Beppe recommends with Bobsmeter. You do not need
to create a cable pair with VSPE, you have several alternate ways to do
this.
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog:
The TCXO used in the 5000A is spec'd at +/-0.5ppm (0.5Hz at 1 MHz)
frequency stability over temperature (0-50C). This is +/- 72Hz at
144MHz. Also, the TCXO can drift +/- 1ppm per year as it ages. The
amount that a crystal drifts as it ages typically slows down as it gets
older, but the
Jerry,
How about documenting your FAROS setup on the Flex Wiki
http://flexradiowiki.com/
73
Trevor G0KTN
Original Message
At 03:57 AM 1/26/2011, Gwyn Williams wrote:
Hi All,
1) The gentleman who suggested FAROS, this is a very good
application but it does not cater for the
I have successfully used Faros with my F5K.
Jim - W4YXU
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-bounces@flex-
radio.biz] On Behalf Of Dave AA6YQ
Sent: Wednesday, January 26, 2011 9:41 AM
To: Gwyn Williams
Cc: flexradio@flex-radio.biz
Subject:
Is there a list of good FW cards?
Specifically PCIE ( cheap!)
Jim - W4YXU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Check the Knowledge Base (using a simple keyword search)
http://kc.flexradio.com/KnowledgebaseArticle50179.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of jim
Sent: Wednesday, January 26, 2011 4:49 PM
To:
Thanks to ALL who offered some help on this topic.
I wound up taking Dudley's suggestion and routed the audio from the Flex
Power Speaker output into my PC's soundcard Line Input.
This is a great way to demo the Flex under various setups.
Rather than purchase a capture tool (of which
Many months back I made some comments on the cards that are on the list
to which Tim has referred.
I am now using a Syba SD-LUC-4F, which works fine:
http://www.newegg.com/Product/Product.aspx?Item=N82E16815124015Tpk=syba%20luc-4f
73
Alan NV8A
On 01/26/11 04:49 pm, jim wrote:
Is there a
12 matches
Mail list logo