hi
is any one can tell me what is the Delay Ms on the antenna section on the top
for i look on the
manual and on the net but i do not understand this i use flex 5000a with Acom
1000 and in between
Buffer i set it to 20ms on the delay it is working i was just wondering if some
one can
Problem with driver please help!
System.DllNotFoundException: No se puede cargar el archivo DLL 'deltapnl.dll':
No se puede encontrar el módulo especificado. (Excepción de HRESULT: 0x8007007E)
en PowerSDR.DeltaCP.Init()
Tenks.
Francesco.
___
Sorry,
Audio card DELTA44 driver v. 6.0.2.5
- Mensaje reenviado -
De: Francesco Reale revre...@yahoo.com
Para: flexradio@flex-radio.biz flexradio@flex-radio.biz
Enviado: Jueves, 19 de abril, 2012 12:26 P.M.
Asunto: [Flexradio] SDR 1000 Vindows 7 32bit
Problem with driver please
PowerSDR, when used with the SDR-1000 and the Delta44 sound card,
utilized the Delta44's control panel to set line-in and line-out gain.
This was designed using the XP Delta44 driver. M-Audio changed the
architecture of their driver and the requisite DLL is no longer
available with Vista and
Thanks Tim for the information and interesting. Is there a solution? .. Eg
other audio card? microsoft windows xp the problem is the end of this year
ending support. Pull SDR1000 in the trash? I know this my problem. I hope to
find a solution in Vista or Win 7 32 bit.
I would like to know that
A very effective interim solution is to use DDUtil. It does display this
info for 3000's and above (with colours). It is one of the many features
that makes DDUtil such a great package.
Keith
On 4/18/12 9:34 PM, Les Keppie les...@internode.on.net wrote:
Hi All
You may read all comments
You can try this. I have no idea where to get the DLL or if it works.
http://kc.flexradio.com/KnowledgebaseArticle50012.aspx
Tim Ellison, W4TME
Product Management, Sales Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email:
Paim-- I will try.
There are three separate lines for keying amplifiers or other equipment
on the back of the Flex 5000.
For each line, the application of RF power from the Flex may be delayed
by the ms setting. That is, the amp line is keyed, then there is the ms
delay before RF power is
hello Steve
thank you for the info i use 20ms with the Acom 1000 , and no isse however what
is the safe
way to put 50ms 60ms there is no info of what do you think
many thanks
vy 73
E.P g0uut
From: Steve Sterling f...@sgsterling.com
To: flexradio@flex-radio.biz
Sent: Thursday, 19
If you're on SSB or digital, a long delay of 100 ms doesn't hurt at all. If
you're a CW op, then the TX delay adds to the existing latencies. For CW, you
should try to keep it as short as possible. The Acom is such a good amp, I bet
it protects itself from hot-switching.
Date: Thu, 19 Apr
yes Jim
however i do not see anywhere how to set it correct again on ssb i set it to
20Ms
and no issue however it will be nice to hear if flex have any info on what is
the best number of setting , some say nothing 0ms some say 50ms some say 100ms
so whatis the right number ???
thank you for
With my right hand on a mouse, and left hand on a Flex control or hand PTT, I
needed another hand to type call signs into my logger. I've been playing
around with Dragon voice recognition software. It's been easy to get to the
point of entering call signs by voice, clicking QRZ to look
Paim,There is no right number. Some amps benefit from a longer switching
delay, some amps don't care. I have an Expert 1K, which had problems with
burned TX relays on older models. I also only use CW like a digital mode, not
with a keyer. Both of these tell me that 100 ms of added TX/RX
Jim, KJ2P
I seem to remember someone doing this with cw. I can't remember if it was
on here or where. Have you done a search of the archives?
Don, kd6hq
-Original Message-
From: Jim Jannuzzo
Sent: Thursday, April 19, 2012 11:36 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio]
I would guess there are several of us with Dragon on this list - can
you give us a quickie course on setting PowerSDR to receive inputs
from Dragon?
At 02:36 PM 4/19/2012, Jim Jannuzzo wrote:
With my right hand on a mouse, and left hand on a Flex control or
hand PTT, I needed another hand
Flex cannot give you a number because it is dependent on your amplifier. My
amp is rated at 15ms maximum time to switch from RX to TX. I set my delay
to 20ms to have a small safety margin.
The correct setting is not dependent on mode, only on the switchover time of
your amp. It is just that
To eliminate the need for dragon, why just not use a foot switch to key? Why do
hams try to make it more difficult than it has to be?
73,
Robert
KB6QXM
Ham Radio Open Conversation
Yahoo group owner/moderator
- Reply message -
From: Don kd...@sonic.net
To: [FlexRadio]
Thanks again Tim, I did not find the driver 5.10.0.5064 M-Audio site, I have
tried to install Win XP on Win7 as manually and then install those for win7
wuorkwith intermittent audio, malfunctions and even changing the buffer.
No gioy perhaps with a different sound card?
Any suggestions?
Thank
Here is the direct link to the 5064 Driver.
http://www.m-audio.com/index.php?do=support.driversf=1018dl=yes
--
Richard A Clafton | the brITish guy | W5\G7EIX
RIROC - Hosting - Development - Technology
http://www.riroc.com | rclaf...@riroc.com
Jack of all trades, master of none, though often
Can’t speak for anyone else, but for me, it’s the quest of what could be and
not the reality of what it actually is.
Don, kd6hq
From: Robert Costa, KB6QXM
Sent: Thursday, April 19, 2012 12:19 PM
To: Don ; [FlexRadio]
Subject: Re: [Flexradio] Off Flex Topic- Voice Recognition for Logging
IMHO, there may be something to this idea. when making decent rate on cw
from W5WMU with a solid Eu run, i'm pretty sure my typing errors hurt my
scorelogging with N1MM...then again, a round or 2 with 'mavis beacon
teaches typing' would prob do the trick
still, interesting idea...my
and speech recognition might give us an 'ssb skimmer' ?? THAT would be
sumthin...
--- On Thu, 4/19/12, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: Re: [Flexradio] Off Flex Topic- Voice Recognition for Logging
and/orControl
To: [FlexRadio] FlexRadio@flex-radio.biz,
so here’s the idea if I have it correct, ssb skimmer recognizes the call of the
dx country that I need
my canned messages answer and when 73 is heard my logging program logs the QSO
and uploads to LOTW
where I get credit for the QSO. Then my maintenance program switches in checks
the confirmed
Not everyone always sits still within reach of the pedal all the time. Some
like a certain freedom as with a speakerphone or wireless telephone. Others
(with my typing skills) may be graduates of the Christopher Columbus school
of touch typing where we look for, discover, and land on the keys
Oh it is surely an improvement. Dragon is nearly perfect VR now. It's so much
more accurate than my typing, I'm going to switch to VR for email, too.
From: patric...@windstream.net
To: flexradio@flex-radio.biz
Date: Thu, 19 Apr 2012 16:53:46 -0500
Subject: Re: [Flexradio] Off Flex
Jerry,I can use Dragon to switch to a logger, enter a call sign, look up the
info on QRZ, and enter into the log. I do know that you can click boxes, or
move a mouse with it, I just don't yet know how. Maybe with two days of
experience I'll be able to move around PSDR.
Date: Thu, 19
I am using my SDR1000's together with my F1.5k and F3K, with or without
M44 Delta cards with both Windows7 32 and 64 for years now, and its
working great.
But must say, it is for a beginners not so easy with a SDR1000 to solve
all the problems to set it up, and giving a newcomer a helping hand
yup, you got it...an 'antenna evaluation' program...'bring me 2 pina
colada's'
ha ha ha...73 w5xz, dan
--- On Thu, 4/19/12, Don kd...@sonic.net wrote:
From: Don kd...@sonic.net
Subject: Re: [Flexradio] Off Flex Topic- Voice Recognition for Logging
and/orControl
To: [FlexRadio]
I've had this happen before and sent the F5KA back to Austin. When the rig
is cold, just turned on, I see an 800Hz upward jump in frequency. Then after
about a minute or so it jumps back to the frequency I was originally on. I
think it's an RFIO board problem, but I'm wondering if there is any fix
--- Forwarded message ---
From: Les Keppie les...@internode.on.net
To: KQ8RP kq...@srgproperty.ws
Cc:
Subject: Re: [FlexEdge] Voltage and Temp
Date: Fri, 20 Apr 2012 10:09:17 +1000
I do not want to have another application like BobSmeter or DDutil running
on my computer
just to monitor
30 matches
Mail list logo
