Hello list,
I have two quick questions:
- Is there a way to send the content of the memories in CWX through
kystrokes on the keyboard? I looked in the manual but don't seem to find it
- maybe it's me...
- Has anybody though ow working on a nicer GUI? Something making it look
like a hardware
I had to reinstall Power sdr to get the waterfall back
strange
73 de Lars SM4IVE
Lars Pettersson skrev 2013-02-09 07:14:
Hi gang
after the last update of SWRplotter 1,4 my waterfall disaperd
it`s just a black part of the screen, all the other spectrum,scope,
and so on are working
maybe
With my F500A using just the primary RCVR and irrespective of the antenna in
use (haven’t tried a dummy load) when I change bands starting at 6M and
clicking on 10, 12 etc to 40 or 80, 15M is always significantly quieter than
all the others mentioned. This is true on my modified Hy-Gain
Patrick,
When you change bands do the sliders on the left move to different settings?
The positions (as well as the preamp settings) are stored on a per band
basis.
That way it may seem that there is a difference in behaviour.
Rob, PA3CNT
2013/2/9 Patrick Greenlee patric...@windstream.net
F5000A with 2nd RCVR and ATU
I ordinarily operate with the panafall display. There are several artifacts
displayed. I don’t know if they just come with the territory or my radio is
different. Can they be removed or reduced, or should they be ignored? They
don’t appear to cause operational
Rob, W E L L D U - U H !!! That was easy. Thanks, I hadn’t noticed. How
about an EASY fix for the gremlins mentioned in my next email?
From: Rob Keijzer
Sent: Saturday, February 09, 2013 10:02 AM
To: Patrick Greenlee
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Normal noise?
On Sat, Feb 9, 2013 at 4:45 AM, Lars Pettersson sm4...@telia.com wrote:
I had to reinstall Power sdr to get the waterfall back
strange
73 de Lars SM4IVE
Lars Pettersson skrev 2013-02-09 07:14:
Hi gang
after the last update of SWRplotter 1,4 my waterfall disaperd it`s
just a black
Patrick
For the Mirrored images you may want to run image calibration on both RX1 2
http://kc.flexradio.com/KnowledgebaseArticle50140.aspx?Keywords=image+calibration
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Patrick
Greenlee
Sent:
hi
is there a way on rit /xit to go 5 10 15 etc since this going 10 20 30 etc .
vy 73
E.P g0uut
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Would like to know if anyone has had the following problem running
the plotter program?
I have the correct port selected and program says CAT Communications OK
After I start the program I see the analysis in progress message followed
by CAT communications failure
No SWR plot shown.
Any help
Where does the wav file one records on the fly with the Flex 1500 reside? I
kept trying to find its location so I could save it. I can see a PowerSDR
folder in my MUSIC Windows 7 folder but nothing appears in it. I also looked
in the Flex folder in the Program directory.
Thanks
Mike
Did you attend? Can you give us a report?
Was a Flex- 6x00 working? Which of them?
Was it running a recording or real-time reception?
Were spectators allowed to tune/control it?
Limitations?
Other comments?
Jerry W4UK
___
FlexRadio
Sent from my Verizon Wireless 4G LTE Smartphone
Original message
From: Jerry Flanders jefland...@comcast.net
Date:
To: flexradio@flex-radio.biz
Cc: Flexedge flexe...@flex-radio.biz,flexradio6000ser...@yahoogroups.com
Subject: [Flexradio] The Flex 6000 demo at the Orlando
Has anyone done this setup?
What cables are needed?
I am slightly confused by the KAT500 documentation.
73
Mike, N1MD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Mike
Very simple to set up, I've got a 5000 but it's the same setup.
RF output from Flex to KPA500 RF IN
KPA500 RF Output to KAT500 RF IN
Antenna(s) to KAT500 antenna inputs
Flex PTT line to KAT500 PTT RLY, KAT500 PTT RLY to KPA500 PA KEY
You just need Coax jumpers and the 2 RCA Phono cables
15 matches
Mail list logo