I am much more comfortable in the conceptual virtual world than I am in the
physical world where what is built (by me) frequently disappoints my vision
of how things will function.
I'm currently experiencing this with my attempts to have a great antenna in
operation at my QTH, an apartment
Thanks for the great comments to my antenna musings. Sorry I erroneously
said that the author was a silent key.
Off to do more homework and to get an external ATU
Jim
WD7W
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim
As mentioned in a previous post my transmitter wasn't.
I found by accident that if I power off the radio and power it back on while
powersdr is turned off, and then turn powersdr back on things work properly.
That is to say, if the radio and powersdr are turned off, and then the radio
Although the panadapter shows a strong signal when I select TUN, there is no
output power shown on the powersdr meter and the swr shows as 1.0
I connected a power meter between the 5000 and my antenna and also no power
when transmitting. Rx seems fine.
I started analyzing this a bit as for
I have the daily digest sent to me but I don't see a way to go into the
reflector other than viewing the monthly digests and with those, I don't see
any mechanism for posting a reply.
Is there a link to go into the reflector, see all the messages, and reply to
those of interest?
Thanks
Antenna ports were misconfigured - thanks to Jerry for pointing this out to
me
Jim
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Wouldn't it be great if the panadapter had a feature that could be turned on
or off that displayed an ID by a signal that indicated what kind of a signal
is present.
This would be especially useful for digital modes when one is using third
party software to decode digital signals and trying to
I'm just starting to explore the use of the second receiver on my months
old 5000a. I was expecting that as I keyed the mic that although receiver 1
would be muted, that receiver 2's audio would continue to be audible. That's
not the case however. What am I doing wrong?
Thanks very much
Jim
I'd like to know if the forthcoming vhf/uhf add-on for the 5000 will support
repeater operation and if so, how will pl tones be implemented.
Also, are there thoughts about using the new add-on with the digital modes
such as D-star, APRS, etc.
Thanks very much
Jim
KD7GND
9 matches
Mail list logo