This could be from a noisy switching power supply. I had the kind of noise as
described and changing power supplies cleared it up. A good linear type power
supply may help. No such noise as described now, so not characteristic of a
Flex Radio.
Could even be noise from a close by wall
have normal band noise and signals? A closer match
doesn't increase the oscillations, it makes them go away. It's not power
supply noise.
On 11/30/2012 7:02 AM, John Sweeney wrote:
This could be from a noisy switching power supply. I had the kind of noise
as described and changing power
plug in a matched antenna, those wild oscillations and spurs
go away, and I just have normal band noise and signals? A closer match
doesn't increase the oscillations, it makes them go away. It's not power
supply noise.
On 11/30/2012 7:02 AM, John Sweeney wrote:
This could be from a noisy
VOX will not activate if the VAC is active. uncheck the VAC and vox should
activate.
73. John. N3WT
On Sep 8, 2012, at 12:57 AM, Ray Gmail percival@gmail.com wrote:
I'm fairly sure the VOX worked when I had 2.3.5
But now on 2.4.4 and the button just refused to activate, anyone else
John,
For CW Skimmer, also check the VAC Direct I/Q Output to VAC in the Audio
VAC setup.
Within CW Skimmer setup, do not check VAC 1 for Audio I/O.Put this to
your PC audio path, if anything at all. This is meant for monitoring the
output audio of CW Skimmer itself and really not
Don't use CW Skimmer often, but decided to check it out again with the new
version Power V2.2.2.
Something has changed. At first noticed a lot of what appeared to be
distorted signals on the CW Skimmer waterfall, also what appeared to be images
of stronger signals. The CWS waterfall
I like DX-Labs suite of programs. Works perfectly with PowerSDR , the
author support is beyond fantastic and a very active user group on Yahoo
Groups.
John N3WT
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Richard
Dave,
I think the NR is far more effective r on this version 2.0.22. Along with
many other items.
If you have audio crackling with the NR, many parameters can effect that.
In addition to the settings of sample rate and buffer size for the firewire,
try reducing the NR Taps in DSP Options.
With Windows 7 64, just installed the new SP1.
On initial installation and start-up of PowerSDR v2.0.19, I had very a high
CPU usage, like 80% cpu. CPU is usually around 15%. Swithing on Task
Manager, I saw that the CPU hog was the .net Runtime Optimazation Service.
After about a minute, the
Also be sure that your Sample Rate and Buffer settings in the Firewire
Driver and PowerSDR match up.You may want to try a lower sample rate
and/or higher buffer. Try SafeMode 1 also.
Have not had this issue here, not normal.
John, N3WT
-Original Message-
From:
Just to let those interested in WSPR by K1JT know, a new version 2.0 was
just released a few days ago.
go to website www.wsprnet.org for full information and download
information.
WSPR is now much easier set up for use with PowerSDR, as it now includes
direct PTT via CAT with PowerSDR, and
Mark,
I have CW Skimmer here and works great. I often connect to the CWSkimmer
Reverse Beacon website all day long when I'm not home. Good to see what the
little guy is hearing during the day all by himself.
However, there are many parameters in both PowerSDR and CWSkimmer that must
be
I also live out in the countryside on a dead-end road in the middle of a
corn field with 12 houses on it. Anyway, I had the same spurious signals as
you describe , mostly on 160 meters and 80 meters. I discovered it was from
an underground dog fence nearby. The dog fence owner was understanding
Zack,
Make sure that the VAC Cable numbers match up correctly between the Virtual
Audio Cable Setup in PowerSDR and soundcard choice for audio output output in
WinWarbler, make sure it matches your VAC cable number choices. I bet you
have it set as FlexRadio Audio rather than the VAC #.
Tim,
For the bias and power calibration, I thought also required is the Array
Solution PowerMaster Monitor connected to a serial port for accurate power
output data . Is this correct?
John N3WT
-Original Message-
From: flexradio-boun...@flex-radio.biz
Paul,
I have the same lag with HRD ver. 5.0 beta. Others have also reported this
lag and about one month ago Simon posted that he was looking into this
issue. For PTT with DM-780, I suggest PTT by comport, rather than PTT by
software command. I know some have resorted to using two physical
I was about to post this question on the HRD reflector, but decided to try
here first to see if anyone else has this issue first. This issue is
probably unique to PowerSDR and/or ComOCom and VAC with Ham Radio Deluxe.
With the new HRD Ver. 5.0 beta and DM 780, I have occasional delays with
I certainly second the recommendation for posting this in the KB Articles.
I was just typing out a similar reply when I read this reply.Thank you
Brian for taking the time to write the overview. It provides the good big
picture for new users.
Brian, I hope a picture of your students at the
The latest Test Branch SVN 3166, which according to the change log, redone
vfo initialization, seems to improve the CW QSK significantly. The TXRX
transition sounds better on the audio, no pop, now smooth sounding. My
Delay at 15ms seems best and quick.
I can also now set the Sample Rate at
-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Sweeney
Sent: Sunday, June 14, 2009 1:05 PM
To: FlexRadio List
Subject: [Flexradio] Test Branch SVN 3166 improved QSK?
The latest Test Branch SVN 3166, which according to the change log,
redone vfo initialization, seems
As a previous Ten Tec rig(s) owner and still a fan, I sure know who Carl is.
Big welcome to Carl, N4PY, to Flex. You are going to like it.
Maybe some wild integration into your programs.
73 John, N3WT
-Original Message-
From: flexradio-boun...@flex-radio.biz
Wanted to pass this tip from Eric for CW users of the new skins console.
Really helps a lot.
The new skins console is CPU intensive, especially on fast CW break-in. I
was having problems on keying for short break-in delay setting .
The RX-TX-RX graphics on the screen were really soaking up
If you have a wireless network card, actually physically remove the card
from the computer and see what effect that may have. Disabling the wireless
network card does not actually take care of DPC problems from a bad
wireless card. I found that out the hard way. Even though the card is
Yesterday I set the Sample Rate back to 4800 khz, just to see how great the
RX filtering can be. It has been a long time since I used the 4800. Wow,
there really is a big difference in the RX filter curve. I can even hear a
difference between 100hz and 50hz. About a month ago there was a
Somehow the new Driver did not install on top of the old properly.
Uninstall both drivers and then reinstall the new. Reboot the PC, also turn
off the Flex 5000A and restart the Flex.follow the prompts for New
Hardware found.
-Original Message-
From: flexradio-boun...@flex-radio.biz
Bernd,
I find that the CWX keyboard works fine, so it is not a bug in the software.
Be sure to reset the database on the new PowerSDR 1.16.2. Do not import
the database from an earlier version. Start from scratch. I once had the
problem that you describe and a new database reset corrected
This also sounds like spurs I received after the neighbors installed an
underground dog fence. The fence underground wire runs along below parts
of my 160 meter loop antenna wire. I had the neighbor turn on and off the
fence to confirm. Three dogs next door with a lot of dog poop if in my
Same problem here with the new firmware 1.3.0 and SVN 2496. Could not run
PowerSDR. Went back to firmware 1.2.9 and all is well again.
I think we just got ahead of things and will be updated by tomorrow. We
are just too quick on the draw when it comes to updates.
73 John, N3WT
-Original
Over a year ago, many of us sent contributions to someone for a new
replacement VAC type program. What ever happened to that new VAC type
program? Are there other options to VAC, other than real cables?
But I do have VAC 4.08 working fine with programs other than MixW. Just
can't seem to get
As I do not have current plans to purchase the RX2 board, are there reasons
to swap out for the new HFRIO anyway?. Such as the added chokes for
improved standing up to static discharge as mentioned by Lee? Suddenly have
perfect CW QSK? (maybe not yet) . :) Appears the stated added features
Gwyn,
On PowerSDR v1.12.0 I find that the screen position is remembered on next
start-up, be it on Monitor 1 or 2. This is actually improved over the V 1.10.3.
Did you start with a new database on V. 1.1.2?
Also, the clipped cw characters may be a function of your Sample Rate/Buffer
Thanks to all the developers for the continued fine updates. Significant
improvements in the CW operation. As a SVN devotee, I have enjoyed most
of the updates for a nice while. The current QST review is already
outdated and the ink is still wet.
Curious, I see that the split screen
I have been trying out the changes on the Alpha RX2 svn branch. Getting a
ahead of the game with the RX2 board, but even without the RX2 there appear
to be applicable changes. However, as of svn 2259, PowerSDR requires a new
Firmware 2.0.**., so PowerSDR svn 2266 will not load.Where can
Flex Gurus,
The review, among many other things, states the Flex-5000A is rated at
100W continuous duty on all modes. This is a recent change that reflects
the results of additional testing.
Is this correct? Last I knew the manual stated 40 watts max continuous.
Also, the review sounded as
CW ops, give the new w2rf SVN a try!There is significant improvement in
full QSK performance. Ed , W2RF, even posted an updated SVN at 5AM
Sunday morning. Ed must dream about this stuff.
Now with no audio pops or crackles on the TR/RX transition. Can't quite
hear between the elements
From Flex Radio advertising statements:
Full duplex operation also allows very high speed (10 ms) T/R switching
for CW and TOR digital modes.
This is most notable when operating full break QSK at 40 WPM where you can
actually hear between the characters.
How can these statements be correct if
Happy to report that the latest SVN 2139 has now fixed CW by KY command
with DX-Labs Winwarbler program and also Ham Radio Deluxe/DM-780 program.
.
Heretofore, I always got a freeze-up after about 20 characters sent trying
to use the CW by KY commands on DM 780 and Winwarbler.The change
I seldom make a post, but had to on this. I just downloaded Jeff's
latest console on his SVN branch and love it. The combo Waterfall and Pan
is fantastic for CW and digital modes use. The other features are great
too. Gave me that ohhh man, cool moment when I first used it.I also
The latest version of Ham Radio Deluxe and DM780 program released yesterday
now supports CW sending by KY command. PowerSDR supports CW by the Kenwood
KY commands.
It does send perfect CW by keyboard, however, having a problem with Ham
Radio Deluxe freezing up when sending CW by KY, after
The beauty of the Flex SDR-1000 and the software is that we can even discuss
issues such as the memory management functions, with the real possibility of
changes in updates. Sure can't expect that with the other manufacturers out
there.
I think a lot of what is being discussed here can be
I would to add to Tim's excellent comments regarding the Delta 44 Box.
I made the breakout box replacement kit available from KB9YIG even before I
ordered the Flex. In my opinion, this little board from KB9YIG is a must have
item for the Delta 44. In addition to the greatly improved RF
One thing I have noticed after owning the SDR-1000 for 3 months , I receive
much better than my getting out on transmit. Not unusual at all to copy the
other station rock solid, no problems, but they say heavy QRM or QRN/ QSB,
rough copy. (they are also using about 100 watts)I do
you should be between -5 and 0 dB 95% of the time during
normal voice transmissions.
73, John W5GI
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Sweeney
Sent: Thursday, December 21, 2006 6:55 AM
Cc: FlexRadio@flex-radio.biz
Subject
Ken,
You hit on something very interesting. I also have the very occasional flat
line, or receiver going deaf, when switching from transmit to receive.
Clicking on Standby and back to On always brings the PowerFlex back to life.
I'm using the standard Parallel cable with a newer, but
Richard,
Thought I would jump in here a put my two cents in.
I have the SDR-1000 and a 756PROII. I find that the SDR-1000 receives the same
or better than the PRO, and with less background noise by reducing the RF gain
control slider on the latest PowerFlex versions. (actually more like a
Also please note that VAC version 4.03 is available at a 50% discount to
previous version purchasers of VAC. Send the author an e-mail for the
discount code.I found that version 4.03 works with the new Multipsk program
versions, whereas VAC ver. 3.12 did not work with Multipsk. There are
Bill,
realized my first reply only went to your personal e-mail, which you may not
be checking. so this one to the group.
I used the SVN 740 on CW this morning with no problem noticed. Using internal
keyer with paddle to the serial port. No changes from previous versions
noticed. I did
Simon,
That young local amateur is one lucky guy to borrow your SDR!. I hope he
knows how much you are appreciated by the World amateurs for your great HRD
programs. I am certainly looking forward to Digital Master 780 to use with
my SDR-1000.
The SDR-1000 with PSK-Deluxe and HRD is
Hi Dave,
I have had excellent results with various PSK programs and SDR-1000 using VAC,
I use nothing but my SDR-1000 for digital modes, it is a different world than
the old fashion 756PROII. (har)(just had to get that hit in) I think the SDR
copies the digital modes as well or better
49 matches
Mail list logo