a modest
(or better) interconnect pipe. Watch out for latency. Avoid WIFI if
possible.
GL es 73
dan
k0dan
-Original Message-
From: Kevin Feeney
Sent: July 20, 2014 21:13
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Possible to run PSDR on a tablet for use with
aFlex-1500
I've run
Try this:
http://en.savefrom.net/
73
k0dan
-Original Message-
From: Randy Pence
Sent: January 01, 2014 17:51
To: flexradio@flex-radio.biz
Subject: [Flexradio] Flex Videos
Hello
I am aware the reflector is not very active any more. I am going to ask a
question here instead
not a big fan of MFJ, but have had good luck with this PS. I hear
some minor birdies warbling when portable, but think it's environment
and not the PS. Manageable. Fan makes a whirring noise but also manageable.
GL es 73
dan
k0dan
-Original Message-
From: Brian Miller
Sent: September 19, 2013
Ah so, now I understand your issue. Sorry I couldn't help, I'm stumped on
this one, altho it wouldn't surprise me if there was some (undocumented?)
keyboard combination to provide that function.
GL es 73
Dan
K0DAN
-Original Message-
From: Don
Sent: May 28, 2013 01:21
To: [FlexRadio
For the F5K (and I presume the whole family of PSDR radios), the buttons in
lower left
AB
AB
AB
let you dance the VFO's all day!
73
de k0dan
-Original Message-
From: Don
Sent: May 27, 2013 18:20
To: [FlexRadio]
Subject: [Flexradio] F3k Split Operation
Hello
I’m using a F3K
Hi Don...
Stubbornly I tried this (Flex 5000, using just RX1 in SPLIT mode), and
AB flipped the two VFO's.
Maybe I'm not understanding your question? Surely, the F1.5K, F3K, and F5K
are not that different?!?
73
de
k0dan
-Original Message-
From: Don
Sent: May 27, 2013 19:25
The button that says center performs that.
73
k0dan
-Original Message-
From: David Land
Sent: May 12, 2013 12:19
To: flexradio@flex-radio.biz
Subject: [Flexradio] How to center the panadapter?
Seems like there was something on here about how to center up the panadaper
display. I had
my
system producing clean audio with adequate RF output, but it took a long
time getting back here. On earlier PSDR versions, it was not this critical,
but now the technique has changed.
GL es 73
Dan
K0DAN
-Original Message-
From: Dan Baker
Sent: February 20, 2013 11:05 PM
high impedance, and
needs a fairly high audio level (0 to +4 dBu).
Make sure none of the later audio stages are shut down (every stage should
be close mid-range).
See if any of this helps.
GL es 73
dan
k0dan
-Original Message-
From: Mark Lunday
Sent: February 20, 2013 01:51 PM
What is a known/documented good/clean battery maintenance system? I have
two different brands here and they're both big noise generators. WalWarts
not so much. Most of the time I'd rather face dead mowers and tractors than
face the electrical noise that comes out of my barn.
73
dan
k0dan
theater receiver too. Sounds great for my ham
applications.
I have no interest in this sale, just doing a favor for a friend. If you're
interested, contact me off-list and I'll put you together with him.
Thanks for your time.
73
Dan
K0DAN
Here is the info for the A/V amp I
of the box
that'll add about 15DB gain to the audio chain. I use the balanced input.
73
Dan
K0DAN
-Original Message-
From: Robert Costa, KB6QXM
Sent: January 08, 2013 02:39 PM
To: Bob Kay ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Strange noise in 5K audio chain
Considering all
Try MIXER
-Original Message-
From: Everett B. Simonds
Sent: December 18, 2012 02:58 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] external head phone is low
On 12/16/2012 5:40 PM, Darryl Wagoner wrote:
Greeting,
I just upgraded to win8-x64 and I have found the volume on
that with major Version changes by Flex, subtle changes happen.
In the final analysis I suggest a new database with each rebuild, then
follow the data and screenshots you have used previously.
GL es 73
dan
k0dan
-Original Message-
From: W1JCW
Sent: December 16, 2012 08:33 PM
To: 'Tim
contests, N1MM is the speed racer...I use
N1MM for some contests, then bring back the log data into LOGic using ADIF.
As with all things, YMMV!
GL es 73
Dan
K0DAN
-Original Message-
From: John Swink
Sent: December 06, 2012 04:02 PM
To: Flexradio Reflector
Subject: [Flexradio] Logging
operation much. In many cases, before we had
the panadaptors and could see what was below 100dBm, we didn't even know
that crud was there!
73
Dan
K0DAN
-Original Message-
From: Patrick Greenlee
Sent: December 02, 2012 06:38 AM
To: K0DAN ; Bob Kay ; flexradio@flex-radio.biz
Subject: Re
breakers doesn't do it, it's your neighbors and/or in your
environment, and might not be feasible to identify or resolve, esp in FL
condo.
GL es 73
Dan
K0DAN
-Original Message-
From: Steve Fowler
Sent: December 01, 2012 04:15 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio
grid is problematic. When I
substitute a battery or alternate PC, I have perhaps killed one noise source
but introduced a new one.
I will worry about it when these noise humps are S9+. Right now they are below
–115dM, not on all bands, and are just annoyances.
73
Dan
K0DAN
From: Bob Kay
will provide specs,
photos, etc.
Thanks for your time...
73
Dan
K0DAN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio
can’t talk/hear with the digital mode
software, nor hear using VOIP.
I think my problem is failure to define proper I/O device on the 3rd party
software. Seems simple but I can’t make it work.
Help? Suggestions?
Thanks and 73,
Dan (K0DAN
for this family of boards is:
http://www.sapphiretech.com/presentation/product/?cid=1psn=000101
Good luck and 73
Dan
K0DAN
-Original Message-
From: Bob
Sent: June 19, 2012 01:06 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Video card for flex
Hi to the group
probably fit in a medium USPS flat rate box). Personal check or
PayPal. Please contact me offlist if interested. (Photos available on request.)
Thanks and 73
Dan
K0DAN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
a single unit, not dual.
Can send you a photo of the item if you're interested.
$20 plus whatever shipping is (can probably go in a small or medium USPS
flat rate box).
Please contact me off list.
Tnx es 73,
dan
k0dan
___
FlexRadio Systems Mailing
list.
Tnx es 73,
dan
k0dan
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
these for
$45 + $7 shipping
http://www.newegg.com/Product/Product.aspx?Item=N82E16815158016
It's available to first taker for $20, shipped anywhere in USA. Please
contact
me off list.
73
dan
k0dan
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
these for
$45 + $7 shipping
(http://www.newegg.com/Product/Product.aspx?Item=N82E16815158016) it's
available to first taker for $20, shipped anywhere in USA. Please contact
me off list.
73
dan
k0dan
___
FlexRadio Systems Mailing List
FlexRadio@flex
Is anyone using Flex/VAC in conjunction with SKYPE or other VOIP services?
Any tutorials or other online references to help set up with Flex, yet still
be able to use the same audio channels to simplify use with VOIP services?
Tnx
73
dan
k0dan
their data to remote receivers, the data output of which can be ported
to 3rd party applications.
73
dan
k0dan
-Original Message-
From: Ken Alexander
Sent: March 19, 2012 11:53 AM
To: Michael Walker ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Query to the user group
Cool idea Mike
Thanks again for the feedback and quick responses.
I guess the lesson learned here, is, that during an update, a little extra
insurance is to do the update, then, force a default database and go from there.
Might be redundant, but might avoid trouble down the road.
73
dan
k0dan
From: Tim
going on
- Can't recover from this situation unless I close PSDR and restart (all OK
until I try R2 again)
Got the following error dump (below).
What do I do now?
Tnx es 73
Dan
k0dan
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box
Per Dudley's email, I was hoping I would have a D'OH! moment and discover
I'd forgotten to reboot, but went thru all that and same error.
PSDR 2.2.3 works fine with R2, but when I run PSDR 2.3.5 it pukes as soon as
I call up R2.
Awaiting other suggestions!
Tnx es 73
dan
k0dan
here.
GL es 73
dan
k0dan
-Original Message-
From: Mark Lunday
Sent: January 27, 2012 01:15 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] weird noise source popping up
Looks like a square waveform but the top level appears like a shallow w
with three distinct peaks and two
only 4 places to adjust mic gain HIHI!
There's a lot of stuff in the audio chain, one just needs to go step-by-step
and make sure there are not extreme adjustments throughout the chain.
GL, have fun, and 73
dan
k0dan
-Original Message-
From: Joe Word
Sent: January 12, 2012 06:42 PM
quite wel, I get great
audio reports, and nobody can tell the difference.
At one time I had Symetrix 528, Aphex Big Bottom, and a split-band processor
(jeez, I can't remember the model!) pumping my ricebox radios, but none of
that pre-processing seems necessary any more!
73
dan
k0dan
(?) empties itself. Other than being
startling and annoying, it's no big deal, but I feel shouldn't be there in
the first place.
Anyone been here?
73
dan
k0dan
-Original Message-
From: k4...@fastmail.fm
Sent: January 08, 2012 04:06 PM
To: Flex
Subject: Re: [Flexradio] Popping sound
been active drivers left behind.
73
k0dan
-Original Message-
From: Brett Gazdzinski
Sent: December 21, 2011 10:08 PM
To: flex Reflector
Subject: [Flexradio] got it fixed.
Well, after a good solid 8 hours of doing battle with windows 7, I managed
to remove most of the files, and after
Aw shucks
-Original Message-
From: Brett Gazdzinski
Sent: December 22, 2011 06:20 PM
To: K0DAN ; flex Reflector
Subject: Re: [Flexradio] got it fixed.
That is a very good idea!
Brett
- Original Message -
From: K0DAN k0...@comcast.net
To: Brett Gazdzinski brett.gazdzin
well and were well-worth the cost of prefab PS versus building one
from scratch.
I have not had trouble with noise from them, but you never know.
GL es 73
dan
k0dan
-Original Message-
From: Jim Jannuzzo
Sent: December 19, 2011 02:33 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio
Do you know what is required to obtain FCC Type Acceptance for sale in USA?
Does a kit get around some of the costs and certification issues?
73
k0dan
-Original Message-
From: Brian Lloyd
Sent: November 27, 2011 06:39 PM
To: FlexRadio reflector
Subject: [Flexradio] Interesting 100W
?
Thanks and 73
dan
k0dan
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
have some record of what
you set up.
Good luck.
73
dan
k0dan
-Original Message-
From: Michael
Sent: November 07, 2011 06:24 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Flex 1500 Question
I would like to know which microphones sound good with the Flex 1500. I am
trying out
, so
whatever is here is of another source. I would offer to send you off-the-air
recordings, but the WAV files PSDR creates are huge and not well-suited to
sending via email.
73
dan
k0dan
-Original Message-
From: Leif Asbrink
Sent: November 04, 2011 04:34 PM
To: flexradio@flex
+ shipping.
If interested please contact me off-list.
73
k0dan
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
+ shipping.
Specs other info at
http://www.bose.com/controller?url=/shop_online/digital_music_systems/computer_speakers/companion_2/index.jsp
If interested please contact me off-list.
73
k0dan
___
FlexRadio Systems Mailing List
FlexRadio@flex
the (signal + noise + DSP).
YMMV.
73
k0dan
=
I wonder if some of the confusion may be between the different types of
'noise'. The wideband thermal type is what NR is intended to reduce,
while pulse type QRN would be handled by the NB. The later can be
handled quite well with the right
,
how do I best use my PSDR for NR, NB, ANF, etc.?
And of course there are the sample size vs buffer size choices, as well as
the AGC-T discussions (which are well documented).
73
k0dan
-Original Message-
From: Bill Ackerman
Sent: November 02, 2011 10:20 AM
To: Al K0VM ; flexradio@flex
have.
73
dan
k0dan
Now, insofar as Flex's NR implementation is concerned, I have to admit
that, even after 3 years of fiddling with it, I have never found any
combination of settings that seem to make it usable. (I have found lots of
settings that make
this is the point at
which you start making recordings of your audio?)
Finally, if you haven't read it, take a look at the WIKI article and use the
steps recommended as a guideline:
http://flexradiowiki.com/frsradoiowiki/index.php?title=Setting_Audio_Gain
Good luck, have fun, and 73
dan
k0dan
PS While
are spoiling us.
73
dan
k0dan
-Original Message-
From: Tim Ellison, W4TME
Sent: October 16, 2011 08:23 AM
To: Flex Radio
Subject: [Flexradio] TNF how to video and white paper now available
We have posted an on-line video showing the advantages and operation of
the new RF Tracking Notch Filter
just too much subtle
stuff that can be missed.
The big trick is not overlook something subtle during an upgrade, only to
find a big mystery weeks after-the-fact!
Good luck 73
dan
k0dan
-Original Message-
From: Tim Ellison, W4TME
Sent: October 15, 2011 07:12 PM
To: flexradio@flex
See if any of the postscripts, here
http://flexradiowiki.com/frsradoiowiki/index.php?title=Setting_Audio_Gain
help you with your situation.
73
dan
k0dan
-Original Message-
From: Bill Ackerman
Sent: October 05, 2011 04:05 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] TX Audio
, it
seems good until the next time you pounce on rare DX and discover your
amplifier isn't there.
Not sure this is reported on the bug list, but it should be.
73
dan
k0dan
-Original Message-
From: Robert Kearbey
Sent: September 24, 2011 12:59 PM
To: FlexRadio@flex-radio.biz
Subject
Ray...
Yes, running DDUTIL 2.0.2.29, which I think is the latest version. I'm not
sure I can force the box uncheck glitch to occur, but it does happen often
enough that I know to look for it as the first cause of a problem.
73
Dan
K0DAN
-Original Message-
From: Ray, K9DUR
Sent
not believe this was an
issue before approx. PSDR 2.1x and almost certainly not before V2.x.
Hope this is of some help!
73
dan
k0dan
From: W1JCW
Sent: September 24, 2011 05:13 PM
To: K0DAN ; Robert Kearbey ; FlexRadio@flex-radio.biz
Subject: Flex not keying amp.
I'll check the bug list and ensure
in this
regard?
73
Dan
K0DAN
-Original Message-
From: k4...@fastmail.fm
Sent: September 24, 2011 05:26 PM
To: W1JCW ; Flex
Subject: Re: [Flexradio] 5K not keying amp.
Glad you got it working. One thing that will uncheck it is if
the PTT button on the DDUtil Other tab is not clicked
green
AHA!!!
-Original Message-
From: Steve Nance
Sent: September 24, 2011 05:54 PM
To: 'K0DAN' ; k4...@fastmail.fm ; 'W1JCW' ; 'Flex'
Subject: RE: [Flexradio] 5K not keying amp.
I think a point of clarification of how DDUtil controls the TX lines is in
order. If DDUtil is in Stby
the PAN cotnrols accordingly. There
is a WIKI article at
http://flexradiowiki.com/frsradoiowiki/index.php?title=Setting_Audio_Gain
which addresses mostly TX adjustment, but does make some mention of receive
audio routing. I can send you some screenshots if you wish.
Good luck and 73
Dan
K0DAN
the 6M/10M FM onto R1 and the HF on R2,
as soon as the R1 squelch is engaged, the audio goes choppy.
So it doesn't appear to be a V/U module issue.
I think Flex is aware of this and has it on the list.
73
Dan
K0DAN
- Original Message -
From: Phil A. McBride (VA3QR) va...@rac.ca
.
73
Dan
K0DAN
- Original Message -
From: Richard Clafton rclaf...@riroc.com
To: 'Brian Lloyd' brian-wb6...@lloyd.com; w1aex.f...@cox.net
Cc: flexradio@flex-radio.biz
Sent: Friday, June 24, 2011 11:03 AM
Subject: Re: [Flexradio] Looks like someone really messed up the Flexwiki
Its non
.
If you can use a soldering iron, and have just a little spare hobby time,
there is no reason to buy new patch/adaptor cables. Just my $0.02 worth.
73
Dan
K0DAN
- Original Message -
From: Jim Jerzycke kq...@verizon.net
To: Michael Goins wmgo...@gmail.com
Cc: FlexRadio List flexradio
the repair guy or guitar guru if you can go
dumpster diving, and give him $10 for lunch money.
Let me know how you make out!
73
Dan
K0DAN
- Original Message -
From: Michael Goins
To: K0DAN
Sent: Monday, June 13, 2011 9:52 PM
Subject: Re: [Flexradio] microphones
Thanks
of the
link here?
Tnx es 73
Dan
K0DAN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base
EXPANDER, COMPANDER,
DX mode, etc. (Then remember to SAVE the profile!)
Hopefully one or two of these items will be of help.
Good luck 73
Dan
K0DAN
- Original Message -
From: Michael Walker va...@portcredit.net
To: mcha...@theriver.com
Cc: Brad A. Steffler bst...@comcast.net; flexradio
to
the bad afternoon?
Sorry I can't be of further help.
GL es 73
Dan
K0DAN
- Original Message -
From: Michael Walker va...@portcredit.net
To: K0DAN k0...@comcast.net
Cc: flexradio@flex-radio.biz
Sent: Monday, May 09, 2011 12:57 PM
Subject: Re: [Flexradio] No RF Out on SSB but RF out in other
., etc. To attempt microphone
plug and play with the Flex is not really a good idea.
Very glad you now have blasting audio levels and hope you can now tame them
to your satisfaction.
73
Dan
K0DAN
- Original Message -
From: Brad A. Steffler bst...@comcast.net
To: flexradio@flex
to sound good, it just takes a little reading experimentation.
GL es 73
Dan
K0DAN
- Original Message -
From: Larry Otto w...@embarqmail.com
To: FlexRadio Reflector flexradio@flex-radio.biz
Sent: Tuesday, April 26, 2011 9:12 AM
Subject: [Flexradio] Mic
Hello All -
I will be heading
Has anyone written a white paper on the tools/techniques for getting best
results in an FMT?
73
dan
k0dan
- Original Message -
From: Jeff Singer jsin...@i1.net
To: FlexRadio@flex-radio.biz
Sent: Sunday, April 17, 2011 11:38 AM
Subject: [Flexradio] FMT Results
Tough FMT. I
of smart charger or power supplytake a look thru your property, and
see what's live when you have R1 and R2 active.
Good luck,
73
Dan
K0DAN
- Original Message -
From: Harry Williams willisw...@msn.com
To: flexradio@flex-radio.biz
Sent: Tuesday, February 15, 2011 9:02 AM
Subject
hardware problems
previously so don't know what to make of the error dump.
Can anyone assist me interpreting the error logs?
Tnx es 73
Dan
K0DAN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
Thanks Dudley...
Yes and no. I did read the How-To and thought I understood it, but not so after
the BSOD...guess I need to read/study more.
The FW and HD controller do not appear to be competing for IRQ.
73
Dan
K0DAN
- Original Message -
From: FlexRadio Support, Dudley Hurry
along OK.
73
Dan
K0DAN
- Original Message -
From: Tim Ellison telli...@itsco.com
To: supp...@flex-radio.com; K0DAN k0...@comcast.net
Cc: flexradio@flex-radio.biz
Sent: Wednesday, December 29, 2010 6:40 PM
Subject: RE: [Flexradio] BSOD
If you are getting a IDE/ATAPI error, I would look
K0DAN
- Original Message -
From: Neal Campbell
To: Tim Ellison
Cc: supp...@flex-radio.com ; K0DAN ; flexradio@flex-radio.biz
Sent: Wednesday, December 29, 2010 6:45 PM
Subject: Re: [Flexradio] BSOD
I would let windows do a repair disk function and check the option where
Look in PSDR under SETUP\KEYBOARD
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Bradley Feldman brad...@bradleyloritheo.com;
flexradio@flex-radio.biz
Sent: Tuesday, December 07, 2010 1:28 PM
Subject: Re: [Flexradio] PowerSDR 2.0.x Button Keyboard Equivalents?
To the
Also be sure VAC is turned off for voice modesit adds another delay loop
which can be very distracting.
- Original Message -
From: Bradley Feldman brad...@bradleyloritheo.com
To: flexradio@flex-radio.biz
Sent: Sunday, December 05, 2010 9:36 AM
Subject: [Flexradio] New 5000A User
as you
would think of a balanced antenna feedline.
GL es 73
Dan
K0DAN
- Original Message -
From: Bradley Feldman brad...@bradleyloritheo.com
To: 'Bret Mills' bmil...@ecso.com; flexradio@flex-radio.biz
Sent: Sunday, December 05, 2010 10:53 AM
Subject: Re: [Flexradio] New 5000A User - TX
balanced mic input? This bypasses the
audio preamp which is in-circuit on the front panel jack...might give you
improved results.
dt
- Original Message -
From: Bradley Feldman brad...@bradleyloritheo.com
To: 'K0DAN' k0...@comcast.net; flexradio@flex-radio.biz
Sent: Sunday, December 05
.
Thanks and 73
Dan
K0DAN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
, but
they're available on the used market (not cheap).
GL es 73
Dan
K0DAN
- Original Message -
From: Dan Jean dml...@gmail.com
To: Flex Reflector flexradio@flex-radio.biz
Sent: Thursday, August 19, 2010 7:59 AM
Subject: [Flexradio] More computer questions--mouse, trackball, etc
, but are
readily available in the used markets, auctions, etc.
GL es 73
Dan
K0DAN
- Original Message -
From: Ronald G. Parsons w5...@w5rkn.com
To: FlexRadio Reflector FlexRadio@flex-radio.biz
Sent: Saturday, June 19, 2010 10:44 AM
Subject: [Flexradio] Foot switch
I am looking
but will occasionally drop packets,
freeze video, etc.). If the ISP (or remote server) isn't providing good
latency specs, any VOIP activity will be an exercise in frustration.
GL es 73
Dan
K0DAN
- Original Message -
From: Steve Floyd w4...@yahoo.com
To: Flex Radio flexradio@flex-radio.biz
The one which they use with their 160M Carolina Windom is about 18 turns
of coax on a ferrite rod.
73
Dan
K0DAN
- Original Message -
From: Ross Stenberg ross.stenb...@charter.net
To: flexradio@flex-radio.biz
Sent: Monday, April 19, 2010 9:24 AM
Subject: Re: [Flexradio] Common Mode
Perhaps the following is the next e.human inteface for FLEX
radio control???
http://www.cnn.com/2010/TECH/04/19/microsoft.skinput/index.html?hpt=C1
But wow, I know there are a bunch of us
out here that would jump on a control surface that emulated the operating
experience of
with these devices, and I
often run full limit QRO and have both coax and ladderline feeders in the
shack.
As always YMMV!
GL es 73
Dan
K0DAN
- Original Message -
From: Richard W. Solomon w1...@earthlink.net
To: flexradio@flex-radio.biz
Sent: Friday, February 05, 2010 12:08 AM
Subject: Re
upgrade, bugs in the new W7 OS, poor choices of X86
apps on my part, etc. Has anyone been there done that? I'd sure like to
get this tool running so I can play with ham radio again!
Tnx es 73
Dan
K0DAN
- Original Message -
From: Joe Knapp jmkn...@gmail.com
To: flexradio@flex-radio.biz
a bunch of people who found a workab le solution (and free!) to their
problems.
Thanks for the info folks...hope to be on the air with y'all soon!
73
dan
k0dan
- Original Message -
From: NU8Z n...@comcast.net
To: 'George Steube' a...@bellsouth.net; 'K0DAN' k0...@comcast.net;
'dan
Speaking of logging software, have any FLEX users out there interfaced LOGic
to their SDR radios?
73
dan
k0dan
- Original Message -
From: Rudy Bakalov r_baka...@yahoo.com
To: FlexRadio reflector flexradio@flex-radio.biz; Brian Lloyd
brian-wb6...@lloyd.com
Sent: Thursday, December 10
was the
data transfer, esp as regards reports, awards, QSLO info, eQSL, LOTW, etc.,
etc., all that background stuff which you have accumulated for years? Surely
all this stuff doesn't just port overor does it
73
dan
k0dan
- Original Message -
From: dan edwards w...@att.net
MPH like the
coprded one recently mentioned in this thread?
73
Dan
K0DAN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio
How 'bout use a remotely-controlled X-10 power module to cycle your radio?
They have versions where you can dial into your QTH and use DTMF, or also
ones that float outside a firewall and can be accessed over the internet.
73
k0dan
- Original Message -
From: Stu Phillips s
89 matches
Mail list logo