Don
Make sure that VAC is not selected.
73 de Joe
K1RQG
In a message dated 3/18/2008 11:17:17 P.M. SA Western Standard Time,
[EMAIL PROTECTED] writes:
I am somewhat confused on how the vox is supposed to work - I know how
it should work. The first example was using a Heil Pro thru
I am running SVN 1738 and see the same problem. Also I tried to use it on CW
and no go at all. This is with SDR-1000. v1.10.3 is fine.
Joe K1RQG
In a message dated 11/10/2007 12:54:28 A.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
I don't know if anyone else has this problem
I also found that if you go to CONTROL PANEL SYSTEM HARDWARE DEVICE
MANAGER then
right click, instead of reloading driver, just disable the device, then
enable and it will come back
to life. This works for me in XP.
Joe
In a message dated 10/31/2007 9:55:56 A.M. Eastern Standard Time,
for
change. I am sure the FLEX 5000 is in a lot of our future plans.
Thank you FLEX RADIO and all those that contribute to the product.
73 de Joe
K1RQG
** See what's new at http://www.aol.com
-- next part --
An HTML attachment
Jose
No, I also have the same problem, and I did file a bug report. I am using
SDR-1000,
RFE, Delta 44, 1w version, no ATU. I see the error The application failed
to start
because libusb0.dll cannot be found---
73 de Joe K1RQG
In a message dated 6/25/2007 2:02:09 P.M. Eastern Daylight
Bill, Jose;
This also fixed the problem for me as well. I hope this .dll will be added
to the SDR-X
release files. Thanks for the help.
73 de Joe
K1RQG
In a message dated 6/25/2007 3:04:07 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Hi Bill
TKS. That was necessary because
I am looking for a DEMI 144/28 mhz transverter that is made for the
SDR-1000. If you have one
excess to your needs, email me off list [EMAIL PROTECTED]
(mailto:[EMAIL PROTECTED]) .
Thanks in advance;
Joe K1RQG
** See what's free at http://www.aol.com
offensive. And I will bet there is a large number of
us out there, most
of whom just consider the source and remain silent.
73 de Joe
K1RQG
In a message dated 4/7/2007 10:40:56 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Original Message
BTW
the 5000 is what I wanted
typically look at sun noise in db steps,
and moon noise in
tenths of a db step. This feature would eliminate another piece of test
equipment that we have at the
operating position. [Also requested by W5LUA]
Thanks and 73
Joe K1RQG
-- next part --
An HTML attachment
Eric,
I see the 1 db feature is already there, sorry
Joe
I am also going
to enter on the features
request list, a feature to be able to view the pan adapter in 1 db steps
[selectable range and offset] for
use on EME and weak signal work. We typically look at sun noise in db
Eric
AWESOME
In a message dated 1/30/2007 7:22:45 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
2 Words: SVN . Waterfall.
Check it out.
Eric Wachsmann
FlexRadio Systems
-- next part --
An HTML attachment was scrubbed...
URL:
Mike
Go to SETUP GENERAL OPTIONS and set your X2 delay to 10 and see how
your system
reacts. Then move from there.
73 de Joe
K1RQG
In a message dated 1/10/2007 1:45:24 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
List Members,
In my first post (attached below) I gave
Have you gone into Setup and enabled X2? Also I do use an isolation relay
to key
the amp. This insures protection of the X2 keying circuits.
73 de Joe
K1RQG
In a message dated 5/19/2006 6:40:50 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
I just hooked up my SDR to my Henry
to
delete .mdb file!
73 de Joe
K1RQG
In a message dated 4/13/2006 12:36:19 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Hi Guy,
Thanks for the comment about the new Console. By the way, if you (or
others) would like to get the latest version, you can download it at:
http
Bob
Should max bandwidth in the specifications be changed to 96khz?
Joe K1RQG
In a message dated 3/24/2006 11:27:09 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
Look this rough first draft over. Lest anyone think I worked hard, this
was a ten minute effort with a doc2html
of these weird
experiences. I am
convinced it was an intermittent inter board connection problem.
Joe K1RQG
In a message dated 2/9/2006 9:04:38 A.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
Well, I
have sort of a variation of the power glitch described. I though it
was just me
Do not forget, that if using the "TUNE" button, that the transmit power is
controlled by the
Tune [Power (W)] selection on the SETUP TRANSMIT tab.
Joe
In a message dated 1/24/2006 11:33:29 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
Hulen,
The power output is
set
Loaded and running Preview 11 with no known issues at this time. The Banner
at top of
screen says Preview 10, but installed ICON etc say Preview 11. What am I
running?
Joe
In a message dated 1/6/2006 4:16:38 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
This is
essentially
.
My CPU usage went from 22% to 15% with DirectX. Running 2.2ghz AMD 64
3500+.
Joe
K1RQG
In a message dated 12/16/2005 6:43:20 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
With
this latest version comes DirectX display modes, optimized DSP,
andimproved AGC. The link below to the r
19 matches
Mail list logo
