Re: [Flexradio] VAC and JT65-HF

Ed, I run JT65 all the time with 5 watts of power. I worked JT1 last night which was Mongolia. Turn down your power and have fun.. The most you may need is 20-25 watts. Scott KQ8RP -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz

[Flexradio] PA Calibration

What is the command to access the PA Calibration to adjust power out on certain bands? I thought it was Shift CTRL P? I am down to about 65 watts out on 12 meters into a dummy load. Thanks Scott KQ8RP ___ FlexRadio Systems Mailing List

[Flexradio] SDR 1000 for Sale

I have a SDR 1000 the 100 watt model with auto tuner, Delta 44 Audio card with cables. Also a Griffin Knob. All works fine, upgrading to 5K model. $1200.00 includes shipping. Scott cell 614-419-3077 KQ8RP ___ FlexRadio Systems Mailing List

[Flexradio] Current Beta version

I just took a new down load of k6jca console it says ver 1.10.4 svn2402 is that correct I thought we were on 1.12.0? Thanks Scott ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] Vista

Intel will not be deploying the Windows Vista operating system internally for its 80,000 workers. By Paul McDougall InformationWeek June 26, 2008 02:47 PM Computers running Windows Vista might have Intel (NSDQ: INTC) Inside, but Microsoft (NSDQ: MSFT)'s newest operating system won't be

[Flexradio] 6 meter amp and pre-amp for 1K

Anyone using a 6 meter preamp/amp successfuly on 6 meters? If so what make and model? Scott ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives:

[Flexradio] PowerSDR 1.12.0 svn 2224

I downladed the latest software for my SDR 1K and have a couple of questions: 1.. Can Rx2 be toggled off the screen? 2.. Is there no more COMP setting? I see DX and CPDR only 3.. Is there no sizing to the screen on this version or do have to use K6jca branch? Thanks, Scott KQ8RP

[Flexradio] FREE Screen Sharing Program

troubleshoot something or just to display something from your desktop or thiers. http://www.crossloop.com/ Enjoy, Scott KQ8RP ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex

Re: [Flexradio] PowerSDR 1.12.0 svn 2224

Ok I downloaded the offical version as well, but can't hide the rx2 on 1. Also if you widen the screen and minimize then it is back to default. You I suspect are on a 5K? - Original Message - From: Tim Ellison [EMAIL PROTECTED] To: KQ8RP [EMAIL PROTECTED] Sent: Thursday, June 12, 2008

Re: [Flexradio] Questions about PowerSDR Versions

I am running a sdr 1k, if I use different version must I recalibrate the PA if I switch between them or just at set up? Thanks Scott - Original Message - From: FireBrick [EMAIL PROTECTED] To: FlexRadio List flexradio@flex-radio.biz Sent: Friday, June 06, 2008 4:54 PM Subject: Re:

[Flexradio] Reverb issue

software set up I think its more of the preamp or other hardware issue. Could this be enhanced by RF at all? Any ideas on where to look next and how to track this down. Thanks Scott KQ8RP ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] Checking Delta44 Sounds Card Voltage

On V1.10.4 and alpha versons how does one go about checking the voltage on the line out? If I go through the routine hitting test shows nothing. It seems like one time in the past I had to go back to a older version to make this work? Scott KQ8RP

[Flexradio] Fw: Checking Delta44 Sounds Card Voltage

I put a Bug in for this today, if someone has a SDR1000 and could possibly test this out and see if it works for them it would be nice to know. If so please let me know what version software you are running. Thanks Scott - Original Message - From: KQ8RP [EMAIL PROTECTED

Re: [Flexradio] Using Go To My PC.com for rig control

anything new get it over to Tim to get updated in the KB.. 73's Scott KQ8RP - Original Message - From: dick kalt [EMAIL PROTECTED] To: flexradio@flex-radio.biz Sent: Thursday, May 22, 2008 7:06 AM Subject: [Flexradio] Using Go To My PC.com for rig control I have been fooling around with Go

[Flexradio] Size of Console

Which branch of SDR allows you to size you console? KQ8RP ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz

[Flexradio] WSPR

Does anyone have WSPR set up on the SDR1000 running? I can't seem to get it working. Any config on WSPR and VAC that you can share would be helpful. Thanks Scott KQ8RP ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex

[Flexradio] Thanks for help on WSPR

I am receivng at this point and ptt is working find flex but don't see any output when transmitting. Thanks for all help today, we are closer.. Scott ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] USB Adapter issues

it back and will leave it on this afternoon to see if we loose it this time.. Thanks to all.. Scott Gordon http://www.kq8rp.us - Original Message - From: Ken N9VV [EMAIL PROTECTED] To: KQ8RP [EMAIL PROTECTED] Sent: Monday, January 28, 2008 12:38 PM Subject: Re: [Flexradio] USB Adapter

[Flexradio] USB Adapter issues

I have tried about everything here with my USB adapter. First off I had it hooked up and it kept dropping out just while recieving. So I then bought a hub with a power suppy and have it hooked up that way with same issue. Just while recieving it drops out. I have tried different connections

[Flexradio] Delta 44 card/Behringer

I am putting my SDR1K back on a dedicated desktop. Have had it hooked to my laptop for awhile but between some usb issues and some future travel which I need my laptop as well as want to run remote. here is my question, I have looked at the quickstart guides but still can't recall how I had

Re: [Flexradio] gain on the sdr1000

what's up. I do fear the 10db preamp is dead. The risk taken in buying a used 1K. vy 73 Rob AB7CF On Fri, 25 Jan 2008 12:35:06 -0500 KQ8RP [EMAIL PROTECTED] writes: My readings from 20 CW into dummy loadat 1K RX Meter Pan Display Preamp Off

[Flexradio] Soundcard Output Voltage

I have tried this with two meters and not able to read any voltage. I unplug the cable from the Line Out on the sdr 1K and measure across the bottom end of the plug and the tip. With the digital voltmeter on AC and clicking the Test button in the setup page I read zero NADA. I have taken off

Re: [Flexradio] Soundcard Output Voltage

it this way right? Scott Gordon http://www.kq8rp.us - Original Message - From: Eric Wachsmann [EMAIL PROTECTED] To: 'KQ8RP' [EMAIL PROTECTED]; 'FlexRadio ' FlexRadio@flex-radio.biz Sent: Friday, January 18, 2008 10:57 AM Subject: RE: [Flexradio] Soundcard Output Voltage You may need to use

[Flexradio] SVN Updates

When I download the SVN Updates I do not get any of the other branches how do I change to get them as well as the main trunk? Scott Gordon Phone: (888) 428-6622 Fax (866) 505-7171 http://www.kq8rp.us ___ FlexRadio Systems Mailing List

[Flexradio] Speaker setup 1K 5K

Thanks to everyone who sent emails and some pictures of your audio set up. That was all very helpful to see what some of you are doing to get that fantastic sound out of that flex. So far by rearranging a few items and adding a few more ferrites and adding a ground to the FA-66 DUH. It seems

[Flexradio] Current SVN?

I see many notes talking about a higher number svn then what I am using. I have a SDR 1K and if I download the SVN right now in the log it shows 1893. When I use it then it shows beta 1.10.4 SVN: 1826. Am I doing something wrong? Scott Gordon Phone: (888) 428-6622 Fax (866) 505-7171

[Flexradio] Speaker Setup for SDR1 5K

Like to here more of what people are using for there speakers for there SDR? I have seen within the knowledge base Best Speaker List. I recently purchased a Altec Lansing VS4221 computer speaker set up and it has very good sound and response. But I can't use it on 75 meters that I know of.

[Flexradio] Fw: [CommCat] New QSXer and Activity Map Page

Here is a awesome freeware program. This can easily show you where other Flexers are operating. Scott Gordon http://www.kq8rp.us - Original Message - From: Howard Nurse [EMAIL PROTECTED] To: CommCat List [EMAIL PROTECTED] Sent: Monday, January 07, 2008 7:23 PM Subject: [CommCat] New

[Flexradio] SDR 1000 Fan Noise

My fan sure seems like it is getting louder. Is there anything we can do to quiet it down any? It is louder than my AL-80B. Guess I could put it under the radio table in a cabinet. Scott Gordon KQ8RP -- next part -- An HTML attachment was scrubbed... URL: http

[Flexradio] Fw: Sleeping Reciever

This is happening using SVN 1826 SDR 1000 Not sure what is going on but I have noticed this several times where the Rx gain is hung at a higher AGC then by Xmit it comes back into line. I can make it happen now by being on the band say 40 meters with S6 noise level and switching to the

[Flexradio] Sleeping Reciever

Not sure what is going on but I have noticed this several times where the Rx gain is hung at a higher AGC then by Xmit it comes back into line. I can make it happen now by being on the band say 40 meters with S6 noise level and switching to the dummy load it will drop to S3 then if I hit the

[Flexradio] Fw: Low Power Output

. It was driving me crazy!! Scott Gordon KQ8RP - Original Message - From: Doug McCann [EMAIL PROTECTED] To: Flex Radio Posting flexradio@flex-radio.biz Sent: Wednesday, December 26, 2007 3:51 PM Subject: [Flexradio] Low Power Output Since I installed the later SVNs (now at 1853), my

[Flexradio] SDR 1000 issue

KQ8RP -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071225/4b121bab/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http

[Flexradio] Fw: SDR 1000 issue

Working now I upplugged the Edoril and plugged it back in.. Scott Gordon - Original Message - From: KQ8RP [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Tuesday, December 25, 2007 2:51 PM Subject: [Flexradio] SDR 1000 issue Not sure what I got going on here, when

[Flexradio] Fw: [CommCat] Announcing CommCat 3.3

Flex Radio SDR now supported by CommCat!! Scott Gordon http://www.kq8rp.us - Original Message - From: Robert L Lapp [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, December 07, 2007 8:24 PM Subject: Re: [CommCat] Announcing CommCat 3.3 HOWARD! THIS IS FANTASTIC! THANK YOU!

[Flexradio] Fw: [CommCat] QSXer now available for download

freqency.. Scott KQ8RP - Original Message - From: Howard Nurse [EMAIL PROTECTED] To: CommCat List [EMAIL PROTECTED] Sent: Monday, November 26, 2007 1:34 PM Subject: [CommCat] QSXer now available for download Hi All-- Most of you know about CommCatLive which gives you a streaming home

[Flexradio] CAT COnfiguration

I use CAT to interface to my logging program. I can't seem to get svn 1640 to work at all with the program. I use V.1.10.3 it works each and every time. Any ideas? Scott Gordon Phone: (888) 428-6622 Fax (866) 505-7171 http://www.srgproperty.com -- next part -- An HTML

[Flexradio] Commcat Interface

I just downloaded there demo at http://www.commcat.com/ccldownloads.php used the TS2000 on the Flex and it seems to be working. Anyone else using this with Flex? I heard W8ERN talking about it today, check out his website http://w8ern.myqsx.net/ Scott Gordon Phone: (888) 428-6622 Fax (866)

[Flexradio] USB Timeout

On my new laptop I am now using the USB adapter. It is constantly timing out? I went into device manager and into USB Root Hub then to power mgt and unchecked the box on each. But I am still timing out? Where else should I look? Thanks Scott Gordon http://www.kq8rp.us --

Re: [Flexradio] New Bandplan effective Jan 2008

Phone: (888) 428-6622 Fax (866) 505-7171 http://www.srgproperty.com - Original Message - From: KQ8RP [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Tuesday, October 16, 2007 9:35 PM Subject: [Flexradio] New Bandplan effective Jan 2008 Sure glad I own a SDR!! http

[Flexradio] New Bandplan effective Jan 2008

Sure glad I own a SDR!! http://www.qrz.com/ib-bin/ikonboard.cgi?act=STf=3t=171194 Scott Gordon Phone: (888) 428-6622 Fax (866) 505-7171 http://www.srgproperty.com -- next part -- An HTML attachment was scrubbed... URL:

[Flexradio] High CPU

Hoping someone can point me in the right direction. I have got alot of new items here I am working with. New Laptop Lenova DUO T7300 @ 2ghz with 2gb memory Edirol FA-66 V1.10.3 I have went in and turned all off at boot up except wireless connection and firewall. I am running 25-28%

[Flexradio] AMD Athlon 64 X2 4600+(65W) Windsor 2.4GHz 2 x 512KB L2 Cache Socket AM2 Processor - Retail

MessageI see Newegg has this dual core, Asus mobo and case on sale for around $200 total. Would this run a 5K ok? Comments appreciated, thanks KQ8RP Scott AMD Athlon 64 X2 4600+(65W) Windsor 2.4GHz 2 x 512KB L2 Cache Socket AM2 Processor - Retail Enabling dual core desktop computing

[Flexradio] Image Rejection

I downloaded the 1350 svn this am and when I try to do a image rejection it only goes to 12% and says it is complete. Do you think it done or is this a issue I have? Scott KQ8RP -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail

[Flexradio] USB Headset with Mic with VAC

I thought I read the other day someone using a USB headset and with VAC they were able to use it with the flex? Can someone post the setup they have for this? I was able to get it to work but it didn't seem to change when I turned the mic gain up and down. Thanks Scott KQ8RP

Re: [Flexradio] IP-AUDIO

I just set up Skype on a Pocket PC and it is working great. Very easy to use.. Scott KQ8RP - Original Message - From: Ken N9VV [EMAIL PROTECTED] To: Flex-radio Reflector flexradio@flex-radio.biz Sent: Thursday, May 10, 2007 9:11 AM Subject: [Flexradio] IP-AUDIO Is anyone using IP

[Flexradio] Remote Flex Connection

KQ8RP http://www.kq8rp.us -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070509/36963961/attachment.html ___ FlexRadio mailing list FlexRadio@flex

[Flexradio] AGC and Other Optimized Receiver Settings

on the computer is 10-15% so it is not stessing out. Any idea what I may have set incorrectly? If I change to 2048 all sounds fine.. Thanks Scott KQ8RP -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz

Re: [Flexradio] AGC and Other Optimized Receiver Settings

D44 Card set up 96K/2048 - Original Message - From: FlexRadio - Eric [EMAIL PROTECTED] To: 'KQ8RP' [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Saturday, April 14, 2007 5:40 PM Subject: RE: [Flexradio] AGC and Other Optimized Receiver Settings What soundcard are you using? It is likely