Re: [Flexradio] Antenna form data not saved

There are still known bugs with not saving your choices in the antenna form as confirmed by myself and Tim ... so not necessarily corrupt ! -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Brian Lloyd Sent: September-28-12

[Flexradio] FLEX5000 - Linrad - MAP65

Hi Any experts on FLEX5000 - Linrad - MAP65 out there? 73 Kevin ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives:

[Flexradio] VU Signal Difference

144.2 on VFO-A . noise floor -130dBm Do AB 144.2 on VFO-B . noise floor -140dBm Any idea why the 10dB difference? TNX 73 Kevin ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] Flex-5000A TX1, TX2, TX3

Tim . can you please confirm if this is correct??? Looking for some further explanation of TX1, TX2, TX3. The manual could still use a little help or a good example. I want to use TX1 and TX2 as a sequencer. I want TX1 to control transmit/receive relays, TX2 to control 8877 amp.

[Flexradio] Flex-5000A TX1, TX2, TX3

Hi Looking for some further explanation of TX1, TX2, TX3. The manual could still use a little help or a good example. I want to use TX1 and TX2 as a sequencer. I want TX1 to control transmit/receive relays, TX2 to control 8877 amp. I think: TX1 delay 250 TX2 delay 150 Will cause:

Re: [Flexradio] Flex-5000A TX1, TX2, TX3

And, every time restart PowerSDR it seems to untick my TX3 setting for 6m and leaves only TX1 ticked? Does it not like using 2 TX ports on 1 band? -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Kevin Hobbs Sent: September

[Flexradio] frequency

Hi I always find that I like the sound of a station on SSB when I tune 100 Hz off .. ie: 50.109900 instead of 50.110. Is there an easy way to put this 100Hz offset into the powerSDR setup? 73 Kevin ___ FlexRadio Systems Mailing List

[Flexradio] DIGU - WSJT

I am trying to run WSJT on Digu (Flex 5000). After I TX, the MOX stays on . ie: does not switch back to RX. Do I have some option selected incorrectly? Any help appreciated. 73 Kevin ___ FlexRadio Systems Mailing List

[Flexradio] For Sale - Flex Radio Accessories

I have a couple of accessories available if anyone is interested. Please contact me direct ve...@cogeco.ca 1) 3DCONNEXION Space Navigator 2) Wood Box Radio Tmate Both in as new condition. 73 Kevin ___ FlexRadio Systems Mailing

[Flexradio] No RX Audio in CW modes

Hi Tim Dudley I have described this issue previously. Flex-5000A WinXP. I upgraded to RC3 yesterday and the problem was fixed. I restart PSDR today and the problem is back. So something happens after the initial run of PSDR ... After I change from SSB to CWU I don't get sound from the speakers

Re: [Flexradio] Values

Hi Tim This is the kind of stuff I was referring to in my reply post a few days ago ... how does one understand what is going on enough to be able to reach the conclusions you have shared below. Perhaps this is best described in a settings flow chart? Perhaps that would be a very helpful KB

[Flexradio] CPU % vs Window Size

Hi I have been experimenting with the PowerSDR window size. By changing the vertical height of the window (to get more / less panadpter size), I see my CPU % very by as much as 20% (from 5 - 25) with only minimal changes in the size. Does anyone else see this? 73 Kevin

Re: [Flexradio] CPU % vs Window Size

Of Graham Haddock Sent: February-24-11 2:17 PM To: Kevin Hobbs Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] CPU % vs Window Size Kevin: This is normal behavior. It takes more computer power to draw a bigger sized screen (for things that are changing.) Try setting the panadaptor display

Re: [Flexradio] CPU % vs Window Size

Really . I am running a Nvidia GeForce 9800 GT Dual Display Adapter . I thought that was a pretty decent card??? From: nealk...@gmail.com [mailto:nealk...@gmail.com] On Behalf Of Neal Campbell Sent: February-24-11 2:58 PM To: Kevin Hobbs Cc: Graham Haddock; flexradio@flex-radio.biz

Re: [Flexradio] CPU % vs Window Size

Hi Neal . I was able to find a newer XP Nvidia driver . it seems to have also lowered CPU usage further . its hard to keep up with all this stuff! 73 Kevin From: nealk...@gmail.com [mailto:nealk...@gmail.com] On Behalf Of Neal Campbell Sent: February-24-11 2:58 PM To: Kevin Hobbs

Re: [Flexradio] DIGL/DIGU Settings in 2.0.19 RC1

I agree Ted ... I have been at this for years, not months, and I don't have much more of a clue than you! Things like: 1) If I choose different sampling rates / buffer sizes ... what does that really get me? 2) I have tried Heils with HC-4, HC-5, HC-6 ... no ever says you sound great like they

Re: [Flexradio] [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release Candidate

Hi Gerald I look forward to trying the update ... but, as I twiddle a million settings trying to get my radio back to the way it was ... can you really not keep any of the user settings between updates? Must I really completely re-enter my Antenna table, CAT settings, VAC settings, CW strings,

Re: [Flexradio] [FlexEdge] Short staffed today due to icing in Austin

Hey Gerald ... good thing you guys are in Texas ... if you were in the North or Canada you'd never be open! HAHA. Kevin -Original Message- From: flexedge-boun...@flex-radio.biz [mailto:flexedge-boun...@flex-radio.biz] On Behalf Of Gerald Youngblood Sent: February-09-11 9:36 AM To:

Re: [Flexradio] SDR-5000 power output

Hi Ross Doesn't agree with what I see ... my 5000 used to make very close 100W (a little under). After recent return from VU upgrade I am only seeing 70-86W HF-50. I will try to recalibrate when I get a chance and see if I can find my missing watts! Kevin -Original Message- From:

[Flexradio] Hotfix

Hi I just got my 5000 with VU upgrade back today. I downloaded the 1394 speed hotfix for XP SP3 . when I try to run it says access denied . I put the password in 2 unzip as prescribed. Been through the complete loop 2 times. Any suggestions? KH

Re: [Flexradio] The Flex experience

I'll take one too ... -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Michael Walker Sent: November-10-10 11:43 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] The Flex experience If anyone wants to sell their

Re: [Flexradio] Drifting noise hills

I get those too ... good news is that they usually only occur on frequencies where weak rare DX are hiding! I thought it was discussed previously that this likely a by-product of the switching power supplies in other electronic devices, possibly even those in Flat Panel Monitors, TV's, etc

Re: [Flexradio] AGC pumping?

Hi Mark I believe this problem is well known as it was discussed with Bob at the Flex Dinner in Dayton ... I am pretty sure that I logged it as a feature request / bug some time ago (along with others). I want / need the noise blanker (they do work great) on 6 meters to get rid of noise garbage,

Re: [Flexradio] Turn off the power to the radios and let them sit over night with no power applied to them

Everyone knows it takes that long before the electrons fully come to rest ... don't be silly -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of jim Sent: Thursday, June 24, 2010 11:58 AM To: 'Bill Bordy, NJ1H '; 'Tim Ellison'

Re: [Flexradio] update? INTEGRITY

I am really not sure how asking for an update gets repeatedly translated into ship me something ready or not ... -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Brian Lloyd Sent: Wednesday, June 16, 2010 7:41 AM To:

Re: [Flexradio] update? INTEGRITY

I agree ... I am not even complaining ... just offering some points of view -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Neal Campbell Sent: Wednesday, June 16, 2010 10:20 AM To: paul glassman Cc:

Re: [Flexradio] update?

Tim ... I know this is the company line now ... BUT It is kind of difficult to NOT make forward looking statements while asking your potential customers to PREORDER. Ie: there was a V/U product announcement with lots of details and I got an order confirmation on Oct 29 last year stating I would

Re: [Flexradio] update?

And I once heard that the best software programmer is an engineer ... there won't be many bells or whistles, no fancy graphics, just some code that mostly works ... but on the bright side it is good enough a lot sooner. Haha -Original Message- From: flexradio-boun...@flex-radio.biz

Re: [Flexradio] update?

[mailto:ger...@flex-radio.com] Sent: Tuesday, June 15, 2010 10:38 PM To: Kevin Hobbs Cc: Tim Ellison; paul glassman; flexradio@flex-radio.biz Subject: Re: [Flexradio] update? Kevin, We are damned if we do and damned if we don't. Your place in the queue is determined by the date of your pre

Re: [Flexradio] update?

customer. KH From: Neal Campbell [mailto:nealk...@gmail.com] Sent: Tuesday, June 15, 2010 9:54 PM To: Kevin Hobbs Cc: Tim Ellison; paul glassman; flexradio@flex-radio.biz Subject: Re: [Flexradio] update? Hi Kevin You must have missed the exchanges a couple of weeks ago with a few users

[Flexradio] Heil HC6

Hi Anyone have a good setup for the new HC6 element on the 5000A? 73 Kevin ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives:

Re: [Flexradio] [SPAM] cw images

Hi Tim I never even new to check that the buffer were the same size ... they weren't. Is a simple check by PowerSDR upon startup to check for equal buffer size something that could / should be added in the future? Thanks, Kevin -Original Message- From: flexradio-boun...@flex-radio.biz

[Flexradio] Strange Image

Hi I noticed a strange image while tuning around. I center RX1 on 50.125. I watch the 6m beacon sub-band with RX2. I have a local beacon on 50.058 . On RX2 I see it on 50.058 (-100dBm), but I also found a weaker copy on 50.078 (-120dBm). At first I thought it was the beacon misbehaving, but

Re: [Flexradio] V/U module is not available for ordering from the OLS

Where do we get 50% off certificates??? I'll take 2!!! -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ed White WA3BZT Sent: Thursday, October 29, 2009 11:22 AM To: Tim (W4TME) Cc: flexe...@flex-radio.biz; Flexradio

Re: [Flexradio] Strange Image

Sent: Thursday, October 29, 2009 12:01 PM To: Kevin Hobbs Cc: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Strange Image On Thu, Oct 29, 2009 at 5:07 AM, Kevin Hobbs ve...@cogeco.ca wrote: Hi I noticed a strange image while tuning around. I center RX1 on 50.125. I watch the 6m beacon sub

Re: [Flexradio] V/U module is now available for ordering from the OLS

I have to disagree a bit ... an 8877 on VHF needs way more than 25W drive ... 60 Watts will do OK and could eliminate the need for an intermediate amp. So now you do know someone who wants a 60W version. -Original Message- From: flexradio-boun...@flex-radio.biz

[Flexradio] Problem?

Hi I am running a Flex-5000A / PowerSDR with DDUtil and CW Skimmer and VQLog (DX Spots) via LiveMUF. I keep hearings short random donks from my PC speaker - almost as if something isn't happy / conflict or timeout. Doesn't happen with PowerSDR alone. Seems to happen less frequently with

Re: [Flexradio] Some initial comments - part 3 or so....

You may have missed the point too ... there is no bell curve in ham radio ... the large majority of hams (market share) are close the death end of the curve ... more like an exponential curve with very little future. Unfortunately none of these companies are going to survive long term unless they

Re: [Flexradio] Some initial comments

I have to agree a little, but I mostly strongly disagree. I bought a Quad Core Vista machine over a year ago with dual monitors specifically for my Flex 5000A after I sold my FTDX-9000. I struggled to get the Flex to run with Vista ... even when it did I still had lockups. After I finally threw

Re: [Flexradio] Birdie Hunting

but gone ... I got rid of the Linksys router - the ethernet cables were radiating crap ... replaced with NetGear and no more issues! -Original Message- From: herbe...@centurytel.net [mailto:herbe...@centurytel.net] Sent: Tuesday, September 08, 2009 4:31 PM To: Kevin Hobbs; 'Flex Radio

Re: [Flexradio] V/U Upgrade

I'll buy 2 to get you started! -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison Sent: Monday, August 24, 2009 6:54 PM To: Ray J; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] V/U Upgrade No. It has to use

Re: [Flexradio] V/U Upgrade

Good ... so now we are taking pre-orders! -Original Message- From: Tim Ellison [mailto:telli...@itsco.com] Sent: Monday, August 24, 2009 7:25 PM To: Kevin Hobbs; 'Ray J'; FlexRadio@flex-radio.biz Subject: RE: [Flexradio] V/U Upgrade Only 998 to go :-) -Tim -Original Message

Re: [Flexradio] V/U Upgrade

PM To: Kevin Hobbs; 'Ray J'; FlexRadio@flex-radio.biz Subject: RE: [Flexradio] V/U Upgrade Now, now. Let's not do anything to cause unwarranted expectations that there is a new V/U SDR in the works :-) -Tim -Original Message- From: Kevin Hobbs [mailto:ve...@cogeco.ca] Sent: Monday

Re: [Flexradio] FLEX-5000 V/U upgrade module question

Any update on timing / availability? -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison Sent: Friday, August 21, 2009 5:32 PM To: Bob Tracy; 'Barry Jablonski'; flexradio@flex-radio.biz Subject: Re: [Flexradio]

Re: [Flexradio] Flex Operations out of Korea

Maybe just Clinton a callsign and a radio -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim R Sent: Tuesday, August 11, 2009 7:12 PM To: telli...@itsco.com; mcha...@theriver.com; FlexRadioReflector Subject: Re: [Flexradio]

Re: [Flexradio] Windows XP Services you can safely shut off

List for VISTA is simple ... turn the whole damn thing off, load XP, and use the XP list. Seriously ... it isn't worth the effort ... I tried for months and I couldn't be happier back on XP. Kevin -Original Message- From: flexradio-boun...@flex-radio.biz

[Flexradio] Birdie Hunting

I went Birdie hunting tonight . found a few couldn't kill them. 1) I was getting tired of a Birdie on 50.125 and having to run ANF all the time . unplugged my wireless router (my Flex computer is cabled) and it went away . suggestions? 2) I guess there is no way to get rid of

Re: [Flexradio] Birdie Hunting

, 2009 9:43 PM To: Kevin Hobbs Subject: Re: [Flexradio] Birdie Hunting Did you have a large 240 core? 2.4 inches, allows a ton of turns on it, it takes a lot! Not all routers are created equal, apparently some are not as bad as others. I've got a Linksys here that we use for ARES events, I'll

[Flexradio] VOX

I am running V1.18.2 . seems my VOX doesn't work since upgrading PowerSDR? 73 de Kevin ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives:

[Flexradio] Shuttle Pro 2

Hi; I have an essentially brand new Shuttle Pro 2 that I got with my Flex-5000A and never used. If anyone wants it, you can make me offer off list. (hope this post is acceptable) TNX Kevin ___ FlexRadio Systems Mailing List

Re: [Flexradio] Speaker suggestion

Ok Neal ... I am going to take your advice on this one. I have been looking for new speakers for the flex ... not happy with the Logitech 2.1 system I have. I found these same BA MM220 speakers in Canada at Tiger Direct for CAD$35 ... we can almost never get similar deals in Canada as in the USA.

Re: [Flexradio] 6 meters recieve on 5000

What's the big deal ... Solution 1: Don't worry about, it's not all that bad, and when the band is open, its open ... you may miss a few weak ones. Solution 2: Add an external 6m Power Amp that also has a preamp. Solution 3: Add any one of the nice external preamps to the convenient RX IN/OUT

[Flexradio] Antenna Selection

I have an idea for what I consider would be an improvement in operating the Flex. I can't say that I am all that fussy about opening the Antenna form whenever I want to change antennas. I really liked the way my FTDX-9000 handled the antenna selection . it has a simple set of 5 buttons (Ant1,

[Flexradio] User Files

I am going to wipe Vista x64 from my PC today and replace with WinXP ... is there a list of user files / settings that I should backup first to make SDR re-installation / setup easier? TNX Kevin ___ FlexRadio Systems Mailing List

Re: [Flexradio] User Files

I already own XP and Vista x64 ... they already have enough of my money for all they grief they cause! KH -Original Message- From: Simon (HB9DRV) [mailto:si...@hb9drv.ch] Sent: June-09-09 7:38 AM To: Kevin Hobbs; flexradio@flex-radio.biz Subject: Re: [Flexradio] User Files Kevin, Before

Re: [Flexradio] Flex Finger

I have got to agree - at least a little bit. My mailbox runneth over with Flex every day lately. Tempted to unsubscribe, but I don't want to miss any of the really valuable information that many post - I don't have a lot of interest in the 3000 which seems to be the big focus since they started

Re: [Flexradio] 6M Preamp

FYI I just finished building a DEM 6m LAN unit for my 5000A and I found that it made way more than the advertised gain when I tuned it on my 8970A Noise Figure Test Set ... I installed all the gain reducing resistors and it was still 22dBgain as I recall (28 without any). 73 de KH -Original

Re: [Flexradio] CW Skimmer.....Again!

Hi Joel Sorry to hear about your problems ... I sold my FTDX-9000 and picked up a Flex-5000A ... I planned to do the same as you (Flex, Skimmer, WSJT, etc) ... my problem is that I have tried to install on no less than 3 computers here and I can't even get the Flex to install properly on any them

[Flexradio] help - how to temporarily stop emails

-- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070317/5ed6ebf6/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz

[Flexradio] Delta-44 Breakout - KB9YIG?

Hi; When I bought my SDR used, it came with a small PCB kit to replace the big Delta-44 box. I believe it was made by KB9YIG, but I have been unable to find a schematic / assembly instructions. I seem to recall references to a few different versions of this device. Can anyone point me to this

Re: [Flexradio] Delta-44 Breakout - KB9YIG?

Thanks to all who replied. 73 de Kevin -Original Message- From: Mike Naruta [mailto:[EMAIL PROTECTED] Sent: January 12, 2007 6:03 PM To: Kevin Hobbs; FlexRadio Subject: Re: [Flexradio] Delta-44 Breakout - KB9YIG? http://www.hamsdr.com/dnld.aspx Folder: D-44 Interface Kit Kevin

[Flexradio] SVN Upgrading - PLL options

Hi All; I installed the Tortoise SVN ... everything worked fine ... the dual RX is really neat. When the new software version ran the first time I had to tell it all about my SDR configuration again ... when it got to asking me about my PLL, it only had options for 10 and 20 MHz ... not that it

Re: [Flexradio] Help - More

Kevin -Original Message- From: Lyman H. Wolfla II [mailto:[EMAIL PROTECTED] Sent: September 19, 2006 6:20 PM To: 'Tim Ellison'; 'Dudley Hurry'; 'Kevin Hobbs'; FlexRadio@flex-radio.biz Subject: RE: [Flexradio] Help - More I agree with Tim. The quality of the speakers and headphones make

[Flexradio] Help - More

Hi All; I would like to thank everyone for their expertise and suggestions in trying to help me get my SDR running. It is great to get support! For those who care . here is where I am at now. As you may recall . I was receiving signals, just nowhere near where they should have been in

Re: [Flexradio] Help - Hardware Guys

, 2006 1:40 AM To: Kevin Hobbs Cc: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Help - Hardware Guys On 15/09/06, Kevin Hobbs [EMAIL PROTECTED] wrote: On the SDR-1000RFE v1.4 PCB, I found 2 diodes attached to a trace between K14 and C47 . the other end of both diodes go thru the PCB near T2

[Flexradio] Help - Hardware Guys

Hi All; Thanks for all the replies so far with ideas to help to get my receiver SDR running right. Tonight I had few more spare minutes, so I decided to tear it all apart and make sure all looked good after shipping. I found one curious concern. On the SDR-1000RFE v1.4 PCB, I found 2

[Flexradio] Newbie - Help

Hi All; I purchased a complete SDR-1000 package used and received it yesterday. Since then I have spent quite a bit of time trying to get this thing to go. The SDR is powered . all relays seem to work fine . rig turns on fine. I am convinced that all software and interconnects are correct.

[Flexradio] Help - Suggestions

Thanks for the quick replies and suggestions so far. Larry: The connections in the back seem good . I wiggled etc with no change. I will check the sound card output level (M44) . not exactly sure, but I did follow the setup guide pics. I am using powered speakers. Tony: I have tried