For the life of me I do not know how I managed to get the VAC2 sliders to
appear in PowerSDR. I clicked on the RX2 button and that caused it to switch
back to displaying the VAC1 sliders. Just how does one toggle this display?
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://gw.k6hr.ampr.org
Thanks to Chris and all who responded. Turning down the FPS worked great. As
I turn it up, the menu items start to hesitate when scrolling.
Thanks, Paul
- Original Message -
From: "Chris Tate - N6WM" <ct...@ewnetinc.com>
To: "Paul Sokoloff WA3GFZ"
thing. No other
applications that I know of are running.
I have the latest OS installed. Maybe a problem with that?? Any help would be
appreciated.
Thank you, Paul WA3GFZ
- Original Message
My experience with N1MM+ is that you must use the SAME serial port for
both N1MM+ and fldigi. Otherwise lockup occurs. I have only used with
PowerSDR, so I have no specifics for SMARTSDR.
On 6/22/2016 20:27, Gordon P. Howell, Jr. wrote:
> I tried to make a post this evening and every time I sign
Hello Neil,
What happens when you run the original PowerSDR?
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://gw.k6hr.ampr.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Neil
Gould
Sent: Sunday, March 06, 2016 11:49 AM
Hello,
I have several devices that connect to my 6300. When the IP address changes
(DHCP) I have to go to those devices and change them. Can you tell me how to
assign a static IP address to the radio?
Thanks, Paul
___
FlexRadio Systems Mailing List
ut I digress
73 Paul G4DCV
On 18-Jan-16 3:45 PM, Alan NV8A wrote:
NewEgg still lists Firewire cards for PCIe, PCMCIA and ExpressCard.
Flex chose Firewire because it was the only technology that would do
the job. Even USB 3.0, which was still new at the time, wouldn't do
it. And at the time, Fire
Dudley,
It was DDUTL. I checked the correct box and everything is fine. Thanks for
the reply.
Paul
-Original Message-
From: Dudley Hurry [mailto:jhu...@austin.rr.com]
Sent: Wednesday, September 02, 2015 1:48 AM
To: Paul Mandel
Cc: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio
the issue. I have saved a
totally new profile and I still have the issue.
Any help is appreciated. I wanted to try the community before putting in a
trouble ticket.
Paul de W4PGM
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out
Mailing List FlexRadio@flex-radio.biz To opt out
of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
--
/*
* Amateur Radio Station AC0HY*
* W. Paul Mills SN807
AC0HY*
* W. Paul Mills SN807*
* Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
* President Kaw Valley Amateur Radio Club*
*/
___
FlexRadio Systems
If anyone is upgrading and wants to sell their 6300 I am looking for a used
one. Please reply with your asking price shipped to 90650. I can pay via
PayPal Instant Payment, or USPS MO.
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://gw.k6hr.ampr.org:8080
Also have to agree. Sometimes it seems even a simple google search was not
performed prior to asking such questions
Sent via the Samsung Galaxy S® III mini, an ATT 4G LTE smartphone
div Original message /divdivFrom: Army Curtis
a...@suddenlink.net /divdivDate:04/28/2015 7:50
Open the setup menu click on the Audio tab, then click on the VAC tab. On
the right side you will see Direct I/Q and a checkbox for Output to VAC
check this box and you should be good to go.
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dan
I have to agree. I'd also be interested in purchasing updates to PowerSDR if
they were available.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark
Lunday
Sent: Sunday, March 01, 2015 8:56
I would ever consider selling it.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Patrick Greenlee
Sent: Saturday, February 28, 2015 3:16 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio
I'm considering setting up a remote QRP station using a Flex 1500.
Is there anyone already doing this that would make recommendations for a
mini PC etc?
I'm looking at a Dell Optiplex FX160 and wondering if Power SDR will run OK
on it.
Paul Delaney - K6HR
paul.hamra...@verizon.net
http
Bill is 100% on the money. I have been in the MI retail business for over 20
years with the nation's largest music dealer. The Hercules stuff is plastic,
relatively inexpensive, and the return rate is somewhat high. As for the
different models, all you'll need to do is map all the controls
What is your Operation Mode setting in the Firewire driver menu?
I have mine set at Safe Mode Level 1 and no more freeze ups!
HTH
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
w...@reagan.com
Sent: Thursday, January 01, 2015 12:50 PM
To:
Don't forget to install with run as administrator
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Neal
Campbell
Sent: Friday, November 07, 2014 12:00 PM
To: Don Plunkett
Cc: flexradio@flex
From the webpage you were referred to: ==DUE TO HIGH DEMAND THIS PRODUCT IS
CURRENTLY BACKLOGGED - PLEASE CALL SALES FOR ESTIMATED DELIVERY TIME ==
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz
and the problem was completely eliminated. YMMV.
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://gw.k6hr.ampr.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Dave Gomberg
Sent: Sunday, July 20, 2014 08:47
To: flexradio@flex
Great advice!
Sent via the Samsung Galaxy S® III mini, an ATT 4G LTE smartphone
Original message
From: Nikon photos nikonpho...@hotmail.com
Date:07/16/2014 11:47 AM (GMT-08:00)
To: flexradio@flex-radio.biz
Subject: [Flexradio] PowerSDR freezing
I had this problem a
to become
more sophisticated as they mature.
So Windows is not a virus.
It's a bug.
Paul, W8AEF
-Original Message-
From: Craig Hayhow
Sent: Friday, July 11, 2014 11:00 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] PowerSDR freezing
Thanks for the replies,
NOTE:- cable and fire
You may want to try restoring Windows to an earlier date, a date before you
started having problems with PowerSDR.
Start
All Programs
Accessories
System Tools
System Restore and follow the directions
Paul, W8AEF
-Original Message-
From: Craig Hayhow
Sent: Friday, July 11, 2014 9:24
I am looking for a USB to parallel adapter that will work with my SDR-1000.
Anyone have any ideas?
Paul, W8AEF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo
I should add that I am running a Toshiba laptop, Windows 7 64 bit.
-Original Message-
From: Paul
Sent: Saturday, June 28, 2014 9:42 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] SDR-1000 to USB
I am looking for a USB to parallel adapter that will work with my SDR-1000
Try this: http://www.bwcelectronics.com
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Hanford R Wright
Sent: Friday, June 13, 2014 2:34 PM
To: alacat
Cc: flexradio@flex-radio.biz
Subject: Re
There is an over voltage protection circuit on the output circuit in the
RM-35 but it usually blows out, protecting the fuse on the input to the
supply and destroying the attached radio.
I cannot understand why Astron has such a good reputation with such a poor
design.
Paul, W8AEF
I use an Astron SS-25. I think it is a 25 anyway. I am not home at the moment
so cannot check for sure.
Ask me how I know about the crow-bar circuit in the 35 grin.
Paul, W8AEF
From: Neal Campbell
Sent: Thursday, June 12, 2014 11:02 AM
To: Paul
Cc: Ray, K9DUR ; Dudley Hurry ; Dave Movius
There is (or was) an over-voltage protection circuit in the RM-35 - it just
doesn't work.
Paul, W8AEF
-Original Message-
From: Richard Solomon
Sent: Thursday, June 12, 2014 8:38 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Power Supply Advice
That's why you should add
my waterfall display has gone blank (black)
PowerSDR v2.6.4 -- setup has worked in the past
but not run for ~ 1 month
adjusting the settings has no effect.
reset to defaults didn't help
nothing in the Flex Knowledge base
I'm sure others have seen this - anyone
remember the magic fix?
73
paul
hi Steve,
thanks, that did the trick.
must be some Windows glitch, so cross your fingers, stand on one foot, and
reboot...
73
paul
On Thu, Jun 12, 2014 at 6:53 PM, Steve Fowler killmo...@gmail.com wrote:
Have you tried rebooting the PC? Several of us including myself see that
once
- --
/*
* Amateur Radio Station AC0HY*
* W. Paul Mills SN807*
* Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
* President Kaw Valley Amateur Radio Club*
*/
-BEGIN PGP SIGNATURE-
Version: GnuPG
questions are answered in this citation.
Also, I have found that direct questions about SmartSDR when addressed directly
to FlexRadio are answered quickly and clearly.
Paul K9IRO
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of GARY
HUBER
Sent
, and
60 m about equal amoiunt of the time on CW and SSB. This radio is fully
functional and is in use on the bands.
The Asking price is $2,000 plus shipping. Please contact me by email,
pjursi...@wmcc.org.
Paul K9IRO
___
FlexRadio Systems Mailing
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Hunter Ellington
Sent: Sunday, May 11, 2014 13:02
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] FlexRadio Digest, Vol 109, Issue 10
Maybe it's the snow coming down hard on May 11, or
. The HDSDR software has a notch
filter that can place multiple notches in the receiver bandpass. This filter
combination compares well with the PowerSDR notch filter. So, here is an
example of software and hardware that compare well with my Flex5000 and
PowerSDR.
Paul K9IRO
-Original
This thread is hardly worth the bandwidth!
Sent via the Samsung Galaxy S® III mini, an ATT 4G LTE smartphone
Original message
From: Jim Jannuzzo jsqu...@msn.com
Date:04/22/2014 2:45 PM (GMT-08:00)
To: John Kramer jkra...@iafrica.com,flexradio@flex-radio.biz
Subject: Re:
Here you go!
http://www.lmgtfy.com/?q=ddutil
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
William and Susan
Sent: Thursday, February 27, 2014 7:53 AM
To: FlexRadio@flex-radio.biz
Subject
PowerSDR v2.6.4 FLEX 1500
PowerSDR:
Setup
DSP
Options
NR
Taps: 31
Gain: 16
Delay: 5
Leak: 10
Works for me.
Paul, W8AEF
-Original Message-
From: Phil Cragg
Sent: Monday, February 24, 2014 12:22 PM
To: 'Lyle Fisher'
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] DSP NR
I forgot that I have AGC-T set to 70 which is also important for NR
operation.
Paul
-Original Message-
From: Randy Hall
Sent: Monday, February 24, 2014 2:17 PM
To: Paul Playford
Cc: Phil Cragg ; Lyle Fisher ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] DSP NR
Paul,
Great post
We many be crazy, but it keeps us from going insane:)
de Paul, W8AEF
-Original Message-
From: Neal Campbell
Sent: Friday, February 07, 2014 12:26 PM
To: Graham Haddock
Cc: FLEXRADIO ; Michael Babineau
Subject: Re: [Flexradio] 60M channels - Canada
I think the Flex guys are a good
Right click in the panadapter, when the crosshairs disappear you can grab
the lower edge of the filter and drag it.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alan
Sent: Sunday, February
An electric drill works best :)
de Paul, W8AEF
-Original Message-
From: Randy Hall
Sent: Monday, January 06, 2014 3:02 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
In repairing screw driver scratches on a monitor, it is best to use a belt
sander or palm
Left hand or right hand?
Paul
-Original Message-
From: Alan
Sent: Monday, January 06, 2014 5:36 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
A hydrospanner also works well.
73s,
Alan
WA4SCA
___
FlexRadio
FWIW
I use an NVIDIA GTS450 and have never experienced any problem whatsoever.
Running PSDR on an intel mobo with an i7 cpugo figure.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bill
Check the Flex Knowledge Base. Everything you need to get setup again is there.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
On 01/02/14, Don Plunkett wrote:
I feel very bad about sending out this email . I have lost all of the
digital setup and user information that I used to have on my
Click on the mailman link at the bottom of this email to unsubscribe
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Ernest Garcia
Sent: Sunday, December 22, 2013 4:33 PM
To: flexradio; Tim
Think I will wait for all the bugs to get ironed out.
Rick Kd4jrx
I thought those were features :-)
Paul, W8AEF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
I use an external tuner. I had very limited success with LDG tuners (I tried
two of them) Take a look at the Palstar HF-AUTO. WOW! Talk about a tuner!
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz
comment about those frequencies.
I think the above analysis is correct and hope others will add their ideas.
Paul Jursinic K9IRO
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim
Jannuzzo
Sent: Thursday, October 17, 2013 5:51 PM
To: draxfel
=Home_Automation_Controls_Touchscreenshash=item519f6130a6
--
/*
* Amateur Radio Station AC0HY*
* W. Paul Mills SN807*
* Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
* President Kaw Valley Amateur Radio Club
.
The six pack will not allow you to select the same antenna for both radios
(safety interlock) Now I can have any combination.
Later I added a MicroHam Station Master and now have fully automated antenna
selection and can manually override if necessary using the selector switches
on the 6-Pack
Paul
It was years ago, but I do remember it was a variation on one of the
examples shown in the instruction sheet. Worked like a charm.
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: Mark Lunday [mailto:wd4...@triad.rr.com]
Sent
In that case check this out. This is what I used before I had an RX2 in my
Flex 5K
DX Engineering RTR-1A
http://www.dxengineering.com/search/brand/dx-engineering/department/antennas
/product-line/dx-engineering-rtr-1a-receive-antenna-interfaces?autoview=SKU
Paul Delaney - K6HR
http
Yes. After installing RX2 you will be able to choose the antenna on the
antenna menu.
Then just choose RX1 Tap and the second receiver will be listening on the
same antenna.
You may want to also check disable RX2 on TX1 transmit so you're not TXing
into RX2
Paul Delaney - K6HR
http
I believe the discussion was this unit is capable of high duty cycle for
wireless streaming
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of paim
Sent: Friday, June 14, 2013 9:48 AM
To: Tim
I believe you need RX2 for that.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
n1...@comcast.net
Sent: Monday, June 03, 2013 1:57 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] VAC1,VAC2
I recently saw an automatic Windows update for FTDI drivers on my W7 64
machine.
If you have Windows Update running for auto updates, it may be worthwhile
to investigate.
On another note this recent FTDI update resolved a problem I was having with
the MicroHam Station Master.
Paul Delaney
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ken
Buser
Sent: Friday, April 19, 2013 15:31
To: Ray, K9DUR; py...@terra.com.br; flexradio@flex-radio.biz
Subject: Re
Hi Rich and all,
No, not the VFO display, rather the frequencies along the top edge of the
Panadapter itself.
This is what the OP was also referring to.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
_
From: Rich - W3ZJ [mailto:r...@w3zj.com]
Sent: Friday, April 19
I've never had problems with Envision monitors.
I have 4 of them in the shack.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim
Ellison
Sent: Sunday, March 24, 2013 6:37 PM
To: flexradio@flex
Check your machine name. If you have a _ or other special characters in the
name it will not start.
Paul
W4PGM
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
vtnn...@comcast.net
Sent: Monday, March 18, 2013 8:46 PM
To: Flex Radio
Subject
This thread should be a real pip on your digest feed!
Maybe you should consider dropping the digest version if you're not happy
with it.
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex
If you can find a Jupiter GPS then G4JNT's 10MHz GPSDO is very simple:
http://www.g4jnt.com/SimpleGPSDO.pdf
There's a single sided PCB for it and the associated display on my web
site at: http://www.g4dcv.co.uk/GPSDO/GPSDO.htm
73 Paul G4DCV
http://kc.flexradio.com/KnowledgebaseArticle50230.aspx?Keywords=vac
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Michael
Sent: Thursday, January 17, 2013 16:40
I don't see that here using PSDR 2.5.3 w/5000a
What version of PSDR and radio are you using?
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ray
percival
Sent
Yes. Go to MMSSTV Options Misc Tab
Tune to WWV and press the Adj button and follow the directions
You'll be straight in no time!
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz
Hello Gary,
Click on setup, then click the General menu tab, then click RX2 tab.
Here you will see a checkbox for Disconnect RX2 RF Input on TX
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex
I just got powersdr v2.5.3 working with sdr-1000 -- I haven't worked with
this in a long time. I have the flex radio usb adapter and a delta-44 card.
This kb article is very helpful:
http://kc.flexradio.com/KnowledgebaseArticle50012.aspx?Keywords=delta-44
OS: window 7 64-bit.
Delta-44 driver:
page:
- W1GHZ papers from recent MUD and EME conferences
- Flexible VCXO Locking board (GPS or other reference)
- updates to some other projects
73 Happy New Year
paul
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
There is also a VAC Setup how-to in the Flex knowledge base
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
jonwei...@aol.com
Sent: Saturday, December 15, 2012 14:10
Same here. Unable to activate VOX from GUI or Setup Menu!
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim
Streible
Sent: Tuesday, December 11, 2012 20:43
Do you have any audio output on the headphone jack?
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dan
Mees
Sent: Friday, November 30, 2012 07:34
To: flexradio
Have you seen the effect of setting the panadapter to 50 fps? Wow!
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Gedas
Sent: Thursday, November 29, 2012 5:15 PM
To: flexradio@flex-radio.biz
I have installed the Voice Keyer and have it using VAC to send audio to my
Flex 5000. I have checked the Allow PTT to Override VAC but when I press
MOX to transmit with the microphone it does not override.
I'm sure I'm doing something wrong but can't find my error.
Paul Delaney - K6HR
http
If using the Voice Keyer with PSDR it would be nice to be able to override
VAC using the MOX button. I mentioned this to Ray K9DUR and he said he would
take a look at it.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex
I'm not near the radio now, but can anyone tell me if using VOX will
override VAC? I'm trying to avoid having to use a physical PTT switch.
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steve
It would be really nifty if a future version could include discrete AF
controls for the main RX and RX2. In the current version the 'main' AF
slider affects both RX1 and RX2 would be nice to be able to listen to RX2
individually!
Paul Delaney - K6HR
paul.hamra...@verizon.net
http
Anyone else having a problem with CTCSS tones not working under 2.4.4 ?
Before I press the button, will resetting the database help correct this?
I'm no longer able to open any local repeaters since upgrading to 2.4.4.
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
Thanks Steve and Dave! That did the trick!
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: Steve Fowler [mailto:killmo...@gmail.com]
Sent: Sunday, September 23, 2012 11:04
To: Dave Beumer WØDHB
Cc: Paul Delaney - K6HR; flexradio
Interesting, none of that behavior seen here.
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-bounces@flex-
radio.biz] On Behalf Of Richard Langford KD8LCD
Sent: Sunday, September
Same here. The first time through the channels switch correctly, after
that it is General channel 4 then channel 5 and then it starts at General
again.
Paul Mandel
W4PGM
-Original Message-
From: flexedge-boun...@flex-radio.biz
[mailto:flexedge-boun...@flex-radio.biz] On Behalf
The current version is 2.3.5 so a version 4 at this time would be a real
stretch!
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-bounces@flex-
radio.biz] On Behalf Of Ronald
the preamp, would it
work with the following sequence with the SSB DCW 2004B:
PTT IN Flex 1500
PTT Out (200 msec) RF amp
PTT Out1 (250 msec) Transverter
Thanks in advance for help.
73 Paul N7QOC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
The Flex-3000 is sold
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Paul Mandel
Sent: Monday, July 23, 2012 2:27 PM
To: 'Flex Radio'
Subject: [Flexradio] For Sale - Flex 3000
It is about 1 2/3 years old. No issues
http://kc.flexradio.com/KnowledgebaseArticle50179.aspx?Keywords=firewire
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-bounces@flex-
radio.biz] On Behalf Of y...@aol.com
Sent
The FLEX 5000A that I had for sale has been sold. Thanks to all who
expressed interest.
73 Paul Urie N7QOC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
It is about 1 2/3 years old. No issues. It has a small scratch on the top
courtesy of my Grandson. $1300 - original box, cables, and spiral manual.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
For Sale a Flex 5000A with RX2 and ATU. It is in perfect condition and has
been used little. It has always been in a non-smoking environment and has
never been operated mobile. I need to reduce the number of radios that I
own. Asking $2800.00.
Paul N7QOC
Hey guys,
They already fixed it. The first edition of psdr had a hand jump out of
the box. It slapped you and said sit in the corner!
Paul w8jn
Sent from Yahoo! Mail on Android
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
no link posted!
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-bounces@flex-
radio.biz] On Behalf Of WM3M
Sent: Wednesday, June 27, 2012 08:10
To: flexradio@flex-radio.biz
Loaded. 2nd rx, vu5k, atu. $3999 or trade.
Paul w8jn
Sent from Yahoo! Mail on Android
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
Dale,
There is a box to check on moblie use. do not show this anymore. I always
get the pick your rig screen.
Paul w8jn
Sent from Yahoo! Mail on Android
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
My new VU5K is only putting out 10w on 2m.
Has full output on 70cm.
Any suggestions?
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
Hi Dan,
I have separate swr meters connected inline with each antenna.
The swr is low 1.2:1 on 2m and 1.1:1 on 70cm
Gulf Alpha EZSat antenna
I'm thinking there may be something I'm overlooking
Drive set to 100 on both bands during TX
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
FM
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
_
From: Dan Parsons [mailto:dpars...@nyip.net]
Sent: Sunday, June 10, 2012 1:46 PM
To: Paul
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] New VU5K only 10w out on 2m
What are you using for signal generation
You can't imagine the racket generated by the cheap dc lights we purchased at
IKEA. The rectifier was generating a plus 20 in the receiver of my rig!
Paul w8jn
Quantum materiae materietur marmota monax
si
the spare sensor then drill the floor and put and new one in
behind the baseboard.
Paul W4PGM
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim Jannuzzo
Sent: Thursday, June 07, 2012 12:05 PM
To: flexradio@flex-radio.biz
Subject
1 - 100 of 443 matches
Mail list logo
