win7 64-bit but it sounds like some people have
got it working - must have been thinking of something else.
Good Luck.
Pete, N3EVL
On 7/19/2012 8:41 PM, ke...@3950.net wrote:
On 7/19/2012 8:23 PM, ke...@3950.net wrote:
On 7/19/2012 7:45 PM, Larry wrote:
Hi Kevin,
Your parallel port
at:
http://www.arvideonews.com/dcc2008/index.html
If this is indeed what Flex has in store, it will be interesting t
compare how they do it.
Pete, N3EVL
PS I have no financial interest in sales of this DVD.
On 5/15/2012 10:45 AM, Brian Lloyd wrote:
On Tue, May 15, 2012 at 7:07 AM
IIRC...
S9 is defined somewhere by someone as 50uV into 50 ohms (i.e the
antenna input to your rig). If you do the math to convert this to power
and express it as dBm, I believe it comes out to -73dBm.
An S-unit is equivalent to 6dBm
Pete, N3EVL
On 12/13/2010 3:33 PM, Neal Campbell wrote
file a bug report for this.
Pete N3EVL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
on the subject of SDR. The club details are:
The Westchester Emergency Communications Association (WECA).
Meet on the 2nd Monday of the month at the Westchester County Center
in White Plains, NY.
James can be reached at: kb1...@yahoo.com
Thanks,
Pete, N3EVL
and see what happens. If that doesn't help, I'll start
looking at replacement PC power supplies - I've heard people here
comment on Antec - I think they make PC Power supplies and the nice
quality cases also.
73, Pete, N3EVL
paul wrote:
Some have mentioned that the PC power supply can cause
Well, I'm not exactly sure what you're expecting when the band is as
crowded as shown in that particular example screen shot and, as is often
the case, signals from adjacent stations are so close that they
overlap. In general, I have no problem identifying the edges of a
particular signal
not be configured right or the PC/Graphics combo is not up to the
task. Even on my old Pentium 4 with poor mobo graphics I never had
resolution problems. It would be interesting if you could post a
screenshot somewhere for comparison purposes.
73, Pete, N3EVL
Brett Gazdzinski wrote:
Well, I have
is not centered within the shaded filter bandpass area on
the screen. When calibration has finished and I change frequency
slightly so that the signal peak IS within the filter bandpass, I see
the correct level of -73dBm on the s-meter.
Pete, N3EVL
Eric Wachsmann wrote:
This sounds
choices of hardware, software, and configuration, and individual
mileage will vary, but I do not accept it as a given that the PC cannot
continue to perform as a general purpose device.
73, Pete, N3EVL
___
FlexRadio Systems Mailing List
FlexRadio@flex
primary developers prove otherwise.
Pete, N3EVL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge
usb hub
device in device manager but am still noticing the problem - it just
stopped during receive after having been running for about an hour or
so; it stopped a couple of days ago in mid-transmission.
Any ideas on what I should do to prevent this happening?
Thanks,
Pete, N3EVL
Thanks for the various recomendations. I'll give the dual USB port option
as suggested by Bill a try first.
Time to get the Delta44 out of the old pc, get Mercury configured in the
HPSDR setup - so much to do, and the holidays are almost over and it's back
to work tomorrow!
Pete, N3EVL
with Mercury and revert the SDR-1000 to sound card via
the Delta 44.
My assumption is that 2 instances of powerSDR, one talking to the SDR-1000
and one talking to HPSDR cannot both use USB ports, hence the need for the
parallel port.
Pete, N3EVL
___
FlexRadio
is not
supported on Vista.
73, Pete, N3EVL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base
assuming that the ATU in the SDR-1000 and Flex-5000 are similar but in any
event, the behaviour reported sounds similar.
Pete
N3EVL
- Original Message -
From: Joel Harrison [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
Sent: Saturday, June 21, 2008 12:37 AM
Subject: [Flexradio] ATU
a particular version with changes via svn it is
generally a good idea to delete and recreate the database in case the
database structure/content was affected by the developer's changes. Having
done so, it _is_ then necessary to recalibrate the PA.
Pete, N3EVL
- Original Message -
From
a
variety of file types scroll by that may or may not include PowerSDR.exe,
associate dlls, etc. It should be pretty obvious from the list what, if
anything, was updated.
Pete, N3EVL
- Original Message -
From: Edward J White [EMAIL PROTECTED]
To: SDR-5000 FlexRadio@flex-radio.biz
Sent: Friday
- Original Message -
From: n3evl [EMAIL PROTECTED]
To: Edward J White [EMAIL PROTECTED]; SDR-5000
FlexRadio@flex-radio.biz
Sent: Saturday, May 17, 2008 10:13 AM
Subject: Re: [Flexradio] how do I know that SVN is working
If you kick off svn via Windows Explorer by right-clicking
- Original Message -
From: n3evl [EMAIL PROTECTED]
To: Edward J White [EMAIL PROTECTED]
Sent: Saturday, May 17, 2008 12:35 PM
Subject: Re: [Flexradio] how do I know that SVN is working
Ed,
Just to clarify, SVN is simply an application for source version
maintenance: it's job
Great news and very well deserved. I especially appreciate their combined
contributions to this e-mail reflector: always a treat to read and giving
much food for thought. Their enthusiasm for this technology is infectious
and represents the best in Amateur Radio today.
Pete, N3EVL
comparing output of the SDR to another rig at the same nominal
power setting, same mic, same antenna, same reporting station and getting
audio reports consistent with much lower power when using the SDR - if this
is the case, that would certainly be curious and worth trobleshooting.
Pete, N3EVL
.
Pete, N3EVL
- Original Message -
From: Bob Cowdery [EMAIL PROTECTED]
To: Reflector Flex-Radio flexRadio@flex-radio.biz
Sent: Wednesday, January 16, 2008 5:43 PM
Subject: [Flexradio] A proposal
Hi all
If you are not in the slightest interested in delving into some of the
software
.
No doubt our resident gurus can express it more clearly.
Pete, N3EVL
- Original Message -
From: Mike Walsh [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
Sent: Monday, January 07, 2008 7:49 PM
Subject: Re: [Flexradio] Discrepancy between meters
Hi Alex,
Yes - in fact I was going
can't use the HPDSR in its place here since it's not an option in
the list. Can this be any available sound card on the system?
Pete, N3EVL
- Original Message -
From: Ray J [EMAIL PROTECTED]
To: FlexRadio@flex-radio.biz
Sent: Friday, October 26, 2007 5:30 PM
Subject: Re: [Flexradio] SDR
to reconfigure my system (but
plan to soon).
Pete, N3EVL
- Original Message -
From: Ken [EMAIL PROTECTED]
To: Flex [EMAIL PROTECTED]; FlexRadio@flex-radio.biz;
[EMAIL PROTECTED]
Sent: Tuesday, October 09, 2007 6:44 PM
Subject: [Flexradio] Speaking of High Tech
Is it possible
v1.10.4 SVN:1644
P4 2.4GHz, 1G RAM, WinXP Home SP2
Atlas/Janus/Ozy via USB Control
Wave settings: RX Post; TX Pre; 192KHz Sampling Rate
Pete, N3EVL
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
that trust and goodwill I mentioned. These guys are giving the competition
a serious run for their money and I like it!
73, Pete, N3EVL
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
- Original Message -
From: Gerald Capodieci
...otherwise unsightly real antennas...
I'm sorry, I don't understand this concept ;)
Pete,
N3EVL
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
You mean it's supposed to say usable and not unusable ???
Pete
- Original Message -
From: FlexRadio KB Admin [EMAIL PROTECTED]
To: 'n3evl' [EMAIL PROTECTED]; flexradio@flex-radio.biz
Sent: Saturday, August 25, 2007 10:53 AM
Subject: RE: [Flexradio] [KB] New article posted
development environment
to it via the above mentioned items. Of course this sounds too simple to be
all there is to it;) If this is how it's set up you may just be able to
reinstall the older sdk and point to that folder hierarchy instead.
Pete, N3EVL
- Original Message -
From: Robert
the
story?
Pete, N3EVL
- Original Message -
From: Duffy [EMAIL PROTECTED]
To: FlexRadio@flex-radio.biz
Sent: Sunday, August 12, 2007 6:37 PM
Subject: [Flexradio] SVN: 1424 performance
Hey Bob I have a little bug with 1424 that doesn't happen every time I
switch back from 192 khz to 48
Posting this again - for some reason it never made it to the list (I think)?
- Original Message -
From: n3evl [EMAIL PROTECTED]
To: Duffy [EMAIL PROTECTED]; FlexRadio@flex-radio.biz
Sent: Sunday, August 12, 2007 8:05 PM
Subject: Re: [Flexradio] SVN: 1424 performance
CPU Usage
This almost sounds like the behaviour seen when VAC is not registered and
the mystery voice message is injected every so often. Maybe the newer
version of VAC needs to be registered again/differently? Just a thought.
Pete, N3EVL
- Original Message -
From: Al [EMAIL PROTECTED
branch
where development is ongoing so losing the code there would be bad. Just
curious what the intent was here in the case of the SDR-X - main merge.
Pete, n3evl
- Original Message -
From: Bill Tracey [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; 'Stig Rasmussen' [EMAIL PROTECTED];
flexradio
Haha!
Yes, I admit to having done this in the past.
Pete, N3EVL
- Original Message -
From: FireBrick [EMAIL PROTECTED]
To: FlexRadio List flexradio@flex-radio.biz
Sent: Saturday, June 16, 2007 7:28 AM
Subject: [Flexradio] am I the only person to do this?
I've posted
a means to an end.
--Buffering concepts: how the RX digital signal is represented as values in
data buffers and makes its way through the various DSP stages, ultimately
arriving at the speaker; equivalent analysis for TX.
Pete, N3EVL
- Original Message -
From: Lee A Crocker [EMAIL
.
These tests were performed with SDR-X SVN:1145
Pete, N3EVL
- Original Message -
From: Robert McGwier [EMAIL PROTECTED]
To: Larry Taft [EMAIL PROTECTED]
Cc: 'Flexradio' flexradio@flex-radio.biz
Sent: Tuesday, April 17, 2007 11:50 AM
Subject: Re: [Flexradio] ANF
WELL PHOOEY, that won't do
FYI, the carrier that was the subject of the previously mentioned tests
was in fact a spur that disappears when Spur Reduction is turned OFF. I
have no idea if a locally generated spur is a good approximation of an
interfering carrier!
Pete
- Original Message -
From: n3evl [EMAIL
practice to post the solution to a problem
on the reflector if that was where the question was initially asked -
otherwise it kinda leaves one hanging!
Pete, N3EVL
- Original Message -
From: Ignacio Cembreros [EMAIL PROTECTED]
To: FlexRadio@flex-radio.biz
Sent: Tuesday, April 03, 2007 4:27 PM
And for those that already have the entire svn tree checked out, you can
dirll down to the ..\branches\SDR-X folder or even continue down to the
Release\bin folder and right click from there and request an svn update.
Pete, N3EVL
- Original Message -
From: Eric Wachsmann [EMAIL
I'm in for $30.00 via PayPal.
Good job, Phil - how you find the time for this and HPSDR, I don't know, but
keep up the good work.
73, Pete, N3EVL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Sunday, June 04, 2006 4:12 PM
like
this merits a bug report to me!
Pete, N3EVL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jack Weber
Sent: Monday, May 22, 2006 6:37 PM
To: [EMAIL PROTECTED]
Cc: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Tuning Clicks
Thanks, Eric
I seem to remember mention of a solution found right there at Dayton - some
tweak to the soundcard config, perhaps, resulting in successful semi-breakin
capability at speeds around 60wpm, but not full QSK. I guess we need Bob or
Gerald to spell out the details.
Pete
-Original Message-
What's the procedure for signing up for the board? If it's simply replying
to this email, please add me to the list!
Pete, N3EVL
The group is currently taking orders for the Atlas circuit
board which should go to production within the next month.
Estimated cost of the Atlas
beyond that provided by
Windows Task Mananger.
Pete, N3EVL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Harold
Bissonnet
Sent: Sunday, April 23, 2006 12:09 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Dual Cores or How I Learned
alternatives that are potentially as appealing; for instance java offers
much here in terms of being platform neutral, free, with free or inexpensive
IDEs.
Just my ten cents worth.
Pete, N3EVL
audio
reports and even heard a recording of myself to prove it!
Many thanks to Julius, W2IHY for working with me on this. Great radio,
great support.
73, Pete, N3EVL
?
Pete, N3EVL
there is a section on tags.
Pete, N3EVL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim Lux
Sent: Friday, March 17, 2006 8:28 PM
To: [EMAIL PROTECTED]; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] PowerSDR v1.4.5 Preview 18 is Released
At 03:19
the SDR DSP and console code?
Pete, N3EVL
Tony,
Please add me to the list for SoftRock-40 (option
2)
Thanks, 73, Pete, N3EVL
Pete Thompson
12 Whitehall Circle
Shrewsbury, MA 01545-4823
PS - I previously emailed you at your raparks
email address - sorry if this is a duplicate
52 matches
Mail list logo
