[Flexradio] 5K Pwr Meter

Pwr meter does not work. I understand it is probably a diode. Is the diode on theHRFIO board? If not, which board is it on and is field fixble? Thanks, Art, K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] 5K Pwr Meter

Dave, Thanks. That is a job for flex service! Art From: Dave Beumer WØDHB d...@w0dhb.net To: w8...@yahoo.com Sent: Sat, February 27, 2010 12:24:14 PM Subject: RE: [Flexradio] 5K Pwr Meter Art It's typically D3 and D4 on the PA board.. They are very tiny

Re: [Flexradio] 5K Fan operation

Thanks for the tip. I unplugged and replugged the fan and it is now working. Art From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Fri, February 26, 2010 2:07:08 PM Subject: RE:

[Flexradio] 5K Fan operation

At what temperature is the 5k fan supposed to come on ? Is it supposed to run in receive? Thanks,Art, K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

Re: [Flexradio] 5K Fan operation

Thanks, Tim Mine is never on. Guess that means a trip to Austin. Art From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Fri, February 26, 2010 1:59:47 PM Subject: RE: [Flexradio]

Re: [Flexradio] 5K Fan operation

Thanks, I will check that. From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Fri, February 26, 2010 2:07:08 PM Subject: RE: [Flexradio] 5K Fan operation Maybe.  It is fairly

[Flexradio] Remote 5000a

Hello all, Am trying to get skype and the 5K interfaced. Skype is up and runni ng. VAC is up and working Have virtual cables 1 and 2 setup per the article in theKC. The article in KC does not show the current versions of skype or PSDR. So far haven't been able to get the 5K audio in or out of

Re: [Flexradio] [FlexEdge] Remote 5000a

Thanks Dudley, That is the way I have them. From: Dudley Hurry dud...@flex-radio.com To: w8...@yahoo.com Cc: flexradio@flex-radio.biz; Flex Edge flexe...@flex-radio.biz Sent: Thu, January 28, 2010 1:51:55 PM Subject: Re: [FlexEdge] Remote 5000a Art, You

[Flexradio] Fw: [FlexEdge] Remote 5000a

Any other suggestions? Thanks, ART  K8JK - Forwarded Message From: Dudley Hurry dud...@flex-radio.com To: w8...@yahoo.com Cc: flexradio@flex-radio.biz; Flex Edge flexe...@flex-radio.biz Sent: Thu, January 28, 2010 1:51:55 PM Subject: Re: [FlexEdge] Remote 5000a Art, You need to

Re: [Flexradio] [FlexEdge] Fw: Remote 5000a

Thanks John, Appreciate your reply. I have PSDR set as you mention and the VAC cables as Dudley mentioned but does not work. Art  K8JK From: John Sweeney n...@comcast.net To: w8...@yahoo.com Sent: Thu, January 28, 2010 10:16:53 PM Subject: RE: [FlexEdge] Fw:

[Flexradio] 5K new drivers

Have been using PB_PAL svn3459 successfully with firmware 2.0.0.3 and firewire drivers 3.4.2.6300. Uploaded 3.5.0.7171 and now get message Radio not found Drivers appear to be  ok per the Flex Radio program, but the OHCI controller info says: Warning*Sidspeed registry entry is missing or

Re: [Flexradio] 5K new drivers

From: w8...@yahoo.com w8...@yahoo.com To: flexradio@flex-radio.biz Sent: Sat, December 12, 2009 10:25:00 PM Subject: 5K new drivers Have been using PB_PAL svn3459 successfully with firmware 2.0.0.3 and firewire drivers 3.4.2.6300. Uploaded 3.5.0.7171 and

Re: [Flexradio] 5K new drivers

Just downloaded and reinstalled the DLL. Nothing changed. From: Tim (W4TME) t...@flex-radio.com To: flexradio@flex-radio.biz Sent: Sat, December 12, 2009 10:35:33 PM Subject: Re: [Flexradio] 5K new drivers Art, You need to be subscribed to the FlexEdge

[Flexradio] Pwr SDR transmit meter

My psdr meter indicates nothing in:fwrd pwr, ref pwr, or swr. Can anyone help? Thanks, Art   K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives:

Re: [Flexradio] Pwr SDR transmit meter

Thanks Dudley, but that is not what I wanted to hear. 73, Art  K8JK From: Dudley Hurry jhu...@austin.rr.com To: w8...@yahoo.com Cc: flexradio@flex-radio.biz Sent: Thu, December 3, 2009 2:36:17 PM Subject: Re: [Flexradio] Pwr SDR transmit meter Art, If the

Re: [Flexradio] Pwr SDR transmit meter

5000A. From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; FlexRadio@flex-radio.biz FlexRadio@flex-radio.biz Sent: Thu, December 3, 2009 2:56:40 PM Subject: RE: [Flexradio] Pwr SDR transmit meter What radio hardware are you using?

Re: [Flexradio] 5K transmit band edge

Ray, Thanks for your interest and help. My problem was solved with SVN 3437! Thanks again, Art  K8JK From: K9DUR k9...@rnacs.com To: w8...@yahoo.com Cc: Tim (W4TME) t...@flex-radio.com Sent: Wed, November 11, 2009 11:22:00 PM Subject: RE: [Flexradio] 5K

[Flexradio] 5K Transmit Band Edge

Have updated to SVN 3433 v1.19.3. I wonder why I don't get the Out of band warning? 73, Art K8JK PS Of course IU still can't transmit within 3 khz of band adge. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] 5K transmit band edge

5000A PB-PAL v1.19.3, SVN 3429 Firmware 2.0.0.3 Drivers    3.4.2.6300 5K will not transmit within 3 khz of upper band edge, ie: 14347, 3997, etc. All is well at 14346.5 etc. What have I done ? Thanks, Art K8JK ___ FlexRadio Systems Mailing

Re: [Flexradio] 5K transmit band edge

Thanks Tim, I apologize, I guess this should be on the FlexEdge ref. I understand the effort to prevent OOB transmit.If I understand correctly this is a permanent feature of PSDR 2.0 ? Art From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com

Re: [Flexradio] 5K transmit band edge

Ray, That had occured to me but still doesn't transmit. I have the upper filter set at 2.8hz. Art From: K9DUR k9...@rnacs.com To: w8...@yahoo.com; Tim Ellison telli...@itsco.com; flexradio@flex-radio.biz Sent: Tue, November 10, 2009 11:39:18 AM Subject: RE:

Re: [Flexradio] 5K transmit band edge

It will transmit on AM mode but not usb,lsb, or cw. Art From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Tue, November 10, 2009 11:32:56 AM Subject: RE: [Flexradio] 5K transmit

Re: [Flexradio] 5K transmit band edge

Nothing happens when attempting to transmit within 3 khz of the top of any band, on any mode except AM. AM works normally. Selecting TUNE produces no output either. Panadapter shows modulation but no output. 73, Art, K8JK From: K9DUR k9...@rnacs.com To:

Re: [Flexradio] 5K transmit band edge

200 and 2700 From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; K9DUR k9...@rnacs.com Cc: flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Tue, November 10, 2009 7:02:36 PM Subject: RE: [Flexradio] 5K transmit band edge What is

Re: [Flexradio] 5K transmit band edge

Ok Tim. Tnx. 73, Art From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; K9DUR k9...@rnacs.com Cc: flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Tue, November 10, 2009 7:23:46 PM Subject: RE: [Flexradio] 5K transmit band edge

[Flexradio] Steppir Control

After using steppir for 4 years  manually, I am trying to get everything to follow the 5K. Have been successful withthe 87A and Palstar AT/Auto but can't get steppir to follow. Am using DDutil. RS232 cable according to Steve's specs.Correct port, baud rate etc.With the enable button checked,

Re: [Flexradio] Steppir Control

Hi Steve, Yes, I want to use the interactive mode. It looks like my problem is the Steppir Firmware. I have vs6504. Thanks,Art From: Steve Nance sna...@charter.net To: w8...@yahoo.com Cc: flexradio@flex-radio.biz Sent: Tue, November 3, 2009 12:56:15 PM

Re: [Flexradio] Is it worth the trouble??

Absolutely!! and remember that what you are seeing on the reflector is a very small percentage of all the Flex Radios out there. Art,  K8JK From: Harold Rosee wa5...@hotmail.com To: flexradio@flex-radio.biz Sent: Tuesday, June 2, 2009 4:25:21 PM Subject:

[Flexradio] Pwr out (drive) 5000A

Pwr out always defaults back to 100 when changing bands. vs 1.16.2, 1.18.0, and pretty betty. What do I have set incorrectly ? Thanks, Art    K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] Pwr out (drive) 5000A

Thanks, That is how mine used to operate. Can't figure out what got changed. Perhaps my database is corected, will try a new one. 73,, Art From: FireBrick w...@billnjudy.com To: w8...@yahoo.com; flexradio@flex-radio.biz Sent: Monday, June 1, 2009 1:02:33 PM

[Flexradio] Amp keying 5000A and Alpha 87a

I have been using this combination successfully for a year and a half. Now the radio will not key the amp. Have tried changing from one port to another on the radio. Also have tried a hard reset of the radio, all to no avail. The amp will key manually by shorting the center of the port to

Re: [Flexradio] Amp keying 5000A and Alpha 87a

No, the alpha is well within the ratings of the 5K switching. Thanks, Art From: Tim Ellison telli...@itsco.com To: w8...@yahoo.com w8...@yahoo.com; flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Friday, May 22, 2009 2:47:04 PM Subject: RE:

Re: [Flexradio] Amp keying 5000A and Alpha 87a

Al,  Thanks Al ! None of them were checked. Pilot error, I'm glad I don't fly ! All is well. 73, Art  K8JK From: Al Ward w5...@sbcglobal.net To: w8...@yahoo.com; flexradio@flex-radio.biz Sent: Friday, May 22, 2009 2:48:03 PM Subject: RE: [Flexradio] Amp

[Flexradio] 5KA and Palstar AT-AUTO

SUCCESS!! Again, thanks to all who tried to help. As a last resort I tried using the Firmware upgrade cable that came with the tuner(Palstar said not to use it. It won't work!) But nothing else worked so I tried it and everything works as it should. Thanks 73, Art  K8JK

[Flexradio] Palstar AT-AUTO

Thanks to all who have responded to my plea for help. I believe I have tried all of your suggestions. Steve sent me a screen shot of  his settings. I have duplicated those, but still not working. I seem to be at wits end of all at this point. I am still open to suggestions. 73, Art K8JK

[Flexradio] Dayton

Am wondering about the Dayton dinner. Is there going to be one? Can't find anything on the Flex website. 73,Art  K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] DDUtil

DDUtil has failed. Was working fine and it shut the whole system. I rebooted and everything works except ddutil. When I try to bring it up I get the message:DDUtil has encountered a problem and needs to close Any suggestions ? Art, K8JK ___

[Flexradio] Flex 5K Palstar AT-AUTO

If anyone out there is using this combo. Please send me your setup, cabling, tuner setup,etc. I am getting nowhere fast. Am using DDUtil. Thanks, Art, K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] PWR out gone with MixW

I had same problem ith DM780 and it turned out that the output VAC cable was not checked in setup.   Art, K8JK --- On Thu, 3/19/09, RJ Harris - W3HP w...@rjharris.com wrote: From: RJ Harris - W3HP w...@rjharris.com Subject: [Flexradio] PWR out gone with MixW To: flexradio@flex-radio.biz Date:

[Flexradio] New drivers 16.2

Good morning all,   Have downloaded new drivers and PSDR and everything is fine except I have no speaker output. Headphones are fine. I do have Powr Spkr out checked in the mixer. What am I missing?   Thanks, Art, K8JK ___ FlexRadio Systems

Re: [Flexradio] New drivers 16.

Eric,   Thanks,that was it.   Art --- On Tue, 3/10/09, Eric Wachsmann e...@flex-radio.com wrote: From: Eric Wachsmann e...@flex-radio.com Subject: Re: [Flexradio] New drivers 16. To: w8...@yahoo.com Cc: flexradio@flex-radio.biz Date: Tuesday, March 10, 2009, 10:59 AM Art, Make sure that you

Re: [Flexradio] FlexRadio Digest, Vol 45, Issue 28

I am not really a contester but I do play around in them. I have found that using two monitors solves most of those issues. Art, K8JK From: Joel Harrison w...@arrl.org To: flexradio@flex-radio.biz Sent: Friday, January 30, 2009 8:40:17 AM Subject: Re:

[Flexradio] VAC

Hello All,  Have new computer and need to know how to move VAC from old box to the new. Thanks in advance. K8JK   Art ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] Com O Com

Is com o com still available FREE. All I have been able to find is a free 14 day trial. I had it on old computer. Thanks 73, Art   K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] Com O Com

Ray, Thanks. I got it. 3, Art  K8JK From: Ray Andrews k9...@rnacs.com To: w8...@yahoo.com; flexradio@flex-radio.biz Sent: Wednesday, January 7, 2009 12:56:34 PM Subject: RE: [Flexradio] Com O Com Art, Yes it is still free through SourceForge.net.  Since it

[Flexradio] New Computer= noise

Help please! Santa brought me the pieces parts for a new computer and I have successfully assembled it, Flex 5000A runs great on it at 10 to 15% CPU useage @192 range But: horrific noise peaks at 100 khz intervals, This is most pronounced on the 80 meter band. There are minor peaks at 50 khz

Re: [Flexradio] New Computer= noise

Hi Neal, Thanks for the suggestions. I tried changing the refresh rate, resolution, etc but to no avail. The noise continues even after removing the monitor cable from the video board. I would guess this pretty much eliminates the video end of things. What can I do re the pwr supply other than

Re: [Flexradio] New Computer= noise

Thanks Mike, Power  supply is a no name , X-Power 585. Art From: W5CUL w5...@sbcglobal.net To: w8...@yahoo.com Cc: flexradio@flex-radio.biz Sent: Tuesday, December 30, 2008 3:20:00 PM Subject: RE: [Flexradio] New Computer= noise Art, Specifically, what

Re: [Flexradio] New Computer= noise

Jim, Thanks, am using wireless mouse and keyboard. Disconnesting them doesn't change anything. Art From: Jim Jerzycke kq...@pacbell.net To: w8...@yahoo.com Sent: Tuesday, December 30, 2008 3:23:36 PM Subject: Re: [Flexradio] New Computer= noise Try some

[Flexradio] v1.16.1

Just upgraded to 1.16.1 and 1.3.0.0 firmware and Now I have no speaker audio out. Headphones work. Using new db and I did reset the radio. What am I missing ? Art K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] 1.16.1

Dudley, The problem is in my speakers. The speaker problem happened at the same time as I upgraded the PwrSDR. What are the chances of that ? Thanks, Art ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] Fw: DDUTIL

- Forwarded Message From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: FlexRadio - Eric [EMAIL PROTECTED] Sent: Saturday, November 29, 2008 10:31:05 AM Subject: DDUTIL Just downloaded v1.6.7.15. Download install were successful, but when I open it sticks on initializing features and

[Flexradio] 5000A, rcvr sensitivity

Receiver has gone deaf all of a sudden. Noise floor is now S0and that is great but signals are all very weak. Same on all bands. Transmit is fine. I have checked everything I can think of. Suggestions will be appreciated.   Thanks and 73,   Art  K8JK

[Flexradio] EasyPal-Dig slow scan/5000A

Am up and running on receive but have not been able to figure out how PTT. Help will be appreciated. Art-K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

[Flexradio] 5000A audio out

Have lost speaker output from my 5K. Headphones output is OK. Have checked the speakers and they are ok. Any suggestions ? Thanks, Art, K8JK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

[Flexradio] F5K, ac on and off

Am planning to use the F5K remotely. I have the DLI ethernet power switch but the blue button must be pushed to turn it on and off. Is there a way around it? Thanks, Art W8IKN __ Do You Yahoo!? Tired of spam? Yahoo! Mail has

[Flexradio] F5K remote

I was not very clear in my previous post. The blue button I referred to, is the on/off switch on the 5000. Art __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- next part

[Flexradio] F5K, PW 1, and Band decoder

Thanks to all for the suggestions regarding this combo. Special thanks to Jim, K4jaf, he got me straightened out and it is now working !! Art - Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.

[Flexradio] SPE Linear

I am considering purchasing the SPE linear. Is there anyone out there who has experience with or who knows concerning using it with the F5K? I would appreciate any comments. Thanks, Art W8IKN - Fussy? Opinionated? Impossible to please? Perfect

[Flexradio] HRD

What is procedure for using HRD with the F5K ? Thanks, Art - Pinpoint customers who are looking for what you sell. -- next part -- An HTML attachment was scrubbed... URL:

[Flexradio] F5K, MicroHam Band Decoder, PW 1

Is anyone successfully using this combo ? I cannot make it work. Need help!! Art - Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. -- next part -- An HTML

[Flexradio] SPE Linear and F5K

Is anyone using the SPE with the 5000? Art - Tonight's top picks. What will you watch tonight? Preview the hottest shows on Yahoo! TV. -- next part -- An HTML attachment was scrubbed... URL:

[Flexradio] CAT

When I try to enable CAT I get following error message: Error Initializing CAT Control. Could not initialize CAT control. Exceptionwas: resource Suggestions please. Art - Need a vacation? Get great deals to amazing places on Yahoo!

[Flexradio] F5K

PS to previous request: F5K PwrSDR 1.10.3 - Shape Yahoo! in your own image. Join our Network Research Panel today! -- next part -- An HTML attachment was scrubbed... URL:

[Flexradio] 5K Startup

Thanks to all who have responded but nothing has helped. I have now installed the hardware and PwrSDR on a second computer and got the same results. Radio does not communicate with the computer(error opening 5K drivers). I have a call in to Dudley but in the meantime all suggestions are

[Flexradio] F5K Startup

The 5000 arived and I thought I was ready but !!Have downloaded and installed the drivers and 1:10.2. Power is on and firewire connected. I get following messages: 1. Error communicating with the F5K. 2. Error opening the F5K drivers. What have I omitted ? Art

[Flexradio] Old versions of PowerSDR

Flex 5000 will be here soon. Is there any reason to keep all of the old PWR SDR versions on my computer ? Thanks, Art - Need a vacation? Get great deals to amazing places on Yahoo! Travel. -- next part -- An HTML

Re: [Flexradio] support the FLEXRADIO COMPANY

I fail to see the purpose of this thread. Why don't we let Flex Radio worry about their business plan ? Art Lee A Crocker [EMAIL PROTECTED] wrote: I would hate to see the colaborative nature of the software destroyed with a subscritpion. One thing Flex could do is charge for service

[Flexradio] SVN

Had been using successfully but it disappeared from my system. I down loaded everything, tortise and svn. Now I have a PwrSDR folder full of the latest revisions but it is not attached(?) to SDR 1.8. I must have missed a step. Where do I go from here ? Thanks, Art, W8IKN

[Flexradio] SDR 1000, PW 1, and Microham Decoder

Is anyone using the above combination sccessfully? I can't get it to work. 73,Art - 8:00? 8:25? 8:40? Find a flick in no time with theYahoo! Search movie showtime shortcut. -- next part -- An HTML attachment was scrubbed...

[Flexradio] Amplifier keying

(I am unable to key my PW 1 amp since version 1.6.2. What changed and what must I do to get it working ? 73, Art W8IKN - Ahhh...imagining that irresistible new car smell? Check outnew cars at Yahoo! Autos. -- next part

[Flexradio] VAC and MIX W Setup

Hello All, Amtrying to setup vac and mix w. Have downloaded and installed VAC version 4.04 and the control panel much different than N4HY's setup instructions. Can someone please give me the proper settings on this version? Reqardin MixW. Do I use the single or dual channel

Re: [Flexradio] VAC and MIX W Setup

Thanks for getting me on the right track but stil having difficulty. When setting the VAC control panel, cable 1 SR is blank and I can't get it to 12000. When I attempt to set cable 2 everything is greyed out. Art Eric Wachsmann [EMAIL PROTECTED] wrote: I believe the

[Flexradio] USB adapter

Help!!! Whenever I turn Pw rSDR off and turn it back on I have to reinstall the USB Adapter. Any ideas?? Thanks, Art W8IKN __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[Flexradio] FA-66 Cables

Santa brought a FA 66 !! Are the cables the same as those used with the Delta 44 or do I need to oreder new ones ? Thanks 73, Art __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[Flexradio] SVN Updates

I have update theSVN regularly, through 689 but but Pwr SDR appears to be stuck on 683. What is my problem ? Thanks, Art - Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail. -- next part -- An HTML

[Flexradio] Sub RX

Volume of sub rx is very, very low. Is there a way to bring it up ? Thanks for all past help. 73, Art - Get your email and more, right on the new Yahoo.com -- next part -- An HTML attachment was scrubbed...

[Flexradio] SVN 680,681

Tuner is grayed out. Is this my individual problem or is it intentional ? Art - Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less. -- next part -- An HTML attachment

[Flexradio] SVN

Have SVN up and running,successfully downloaded through vs 670. Now when I attempt to update, I get an error message:desktop new folder locked. How do I unlock it? I also get a second error message saying:Please executethe The Cleanup command I assume this is the disk cleanup, which I have

Re: [Flexradio] SVN

Thanks Eric. That did it. 73, Art Eric Wachsmann [EMAIL PROTECTED] wrote: Make sure that the SVN version of the console (and any other documents in the folder) are closed. Then right click on the SVN folder and select TortoiseSVN - Cleanup. This should get you going again. Eric

[Flexradio] Download and install Tortoise SVN

Am just getting around to using SVN. Am following the instructios from Flex website and all goes well until I get to SVN Checkout where I get the following mesageNo connection could be made because the target machine actively refused it. What am I doing wrong ? Thanks , Art

Re: [Flexradio] Download and install Tortoise SVN

Thanks for the quick responses. It was the Norton firewall. Turned it off and all is well !! Thanks and 73, Art FlexRadio - Eric [EMAIL PROTECTED] wrote: Make absolutely certain that you copied the url correctly as it is case-sensitive (typos are common on the IP address near the

[Flexradio] MicroHam Band decoder

Is anyone using the microHAM band decoder with the SDR1000 to control an amplifier ? In my case it would be the PW 1. 73 thanks, Art, W8IKN - Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail Beta. -- next part

[Flexradio] wa6ahl console

Where can I download this console ? = Thanks, Art = - Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates= starting at 1cent;/min. -- next part -- An HTML attachment was scrubbed... URL:

[Flexradio] Teamspeak-Skype

What must I do to use Delta 44 and mike on teamspeak and/or skype as well as the SDR ? Thanks, Art - Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, more on new and used cars. From [EMAIL PROTECTED] Wed Feb 15 21:22:30 2006

[Flexradio] CWX

When keying the SDR1K With keyboard or memories I miss the first character. What must I do? Thanks. Art, W8IKN SDR 1000, 100 watt, Delta 44, P4 2.8gig, .5 gig ram - Yahoo! Mail Use Photomail to share photos without

[Flexradio] Echo on transmit

What is the cure for echoing on transmit ?Thanks, Art Yahoo! Photos Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.

[Flexradio] Prev 8

Have downloaded and installed prev 8 but now I have no audio(transmit or receive) on any of the preview versions. Version 1.4.4 is ok. Where did I go wrong ?Thanks, Art__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection

[Flexradio] Flex auto tuner

Hello all:What is the tuning range of the ATU module for the SDR1K? Is it made by FlexRadio ? And how difficult is the instalation ? Thanks, Art Yahoo! Personals Let fate take it's course directly to your email. See who's waiting for you Yahoo! Personals

[Flexradio] HRD

I have been unable to make HRD connect with Pwr Sdr 1.4.5prev 5 or 6. Worked fine with the previous versions. Suggestions would be apreciated. Thanks, Art Yahoo! FareChase - Search multiple travel sites in one click.

[Flexradio] vs 1.4.5 prev 4

When I switch from rx to tx(OK) but when switches back to rx there is no audio. Have t x out of the software and restart it. What have I done wrong ? Thanks, Art Yahoo! FareChase - Search multiple travel sites in one click.

[Flexradio] Error reading bandinfo table

How do I solve this problem with 1.4.5 beta prev 1 ? Thanks, Art Yahoo! for Good Click here to donate to the Hurricane Katrina relief effort.

[Flexradio] SDR Power Out

Hello Again, What am I doing wrong? Maximum output on SSB is 40 to 50 watts and 80 watts on CW. Using the Delta 44 card. Have pwr set on 100 andmic on 60. Have tried mic higher with no significant change. Thanks, Art Yahoo! for Good Click here to donate to the Hurricane Katrina relief effort.

[Flexradio] Receive images

Hello all, Just got my second SDR1K up and running(first was fried by lightning) and I have severe images on receive. Can anyone help me adjust these out ? I don't have a signal generator. 73, Art SDR 1000 Delta 44__Do You Yahoo!?Tired of spam?

[Flexradio] 1.4.2

Just downloaded 1.4.2 and everything appears normal but there is no audio. What might the problem be ? 73, Art__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[Flexradio] PTT

Hello all, I just got my mike ptt wired for the SDR. When I push the footswitch, it goes to transmit but I get a red "high swr" note on the console. What am I doing wrong ? Art Sell on Yahoo! Auctions - No fees. Bid on great items.

[Flexradio] Calibrate Amp Gain by Band

Just downloaded 1.3.11 and can't calibrate. Get the message, gain cal. is invalid What am I doing wrong ? 73, Art Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football

[Flexradio] Panadapter screen

Is there a way to broaden the visible spectrom on the panadapter ? Thanks, Art Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football

[Flexradio] Icom 4kl Amp

Can anyone tell me how to use the 4kl amp with the SDR1000 ? Thanks, Art__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[Flexradio] Help

bands. Thanks in advance. Art, W8IKN Yahoo! Mail Stay connected, organized, and protected. Take the tour

  1   2   >