Hi Gerald,
Eight USB outputs for the SDR-5000 is not enough, hint, hint, hint. I
will require at least twelve.
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
Of Ray
Andrews, K9DUR
Sent: Friday, October 12, 2007 7:11 AM
To: 'Bob Tracy'; 'Dave Blaschke'; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Band data output from SDR-5000
Bob,
You wrote, Currently there is only one way to get band data
from either Flex radio and that is via CAT
At 09:20 AM 10/13/2007, Gerald Youngblood wrote:
A few notes on the subject:
1) Phil Theis is working on a FlexWire conversion for the UCB board.
2) Eric plans to add the ability to use TX1-TX3 as a binary output to allow
up to eight antennas to be controlled using those outputs with an external
Gerald,
If TX1-TX3 can be set to become a binary output for band-decoding, how would
you key an external device such as an amp. If TX1-TX3 are sending out a
binary code for antenna switching or other band-encoded function, then they
would have to be in that state during both TX RX, and
] On Behalf Of Ray Andrews, K9DUR
Sent: Saturday, October 13, 2007 4:03 PM
To: 'Gerald Youngblood'; 'Bob Tracy'; 'Dave Blaschke';
FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Band data output from SDR-5000
Gerald,
If TX1-TX3 can be set to become a binary output for band-decoding, how would
you
At 12:42 PM 10/13/2007, Gerald Youngblood wrote:
FlexWire does have an interrupt input so we will have the option of either
interrupt or polled inputs. We use interrupts currently for the keyer input
and PTT.
Excellent.. then you'd have something like interrupt for attention,
which would kick
By chance, is there any documentation of the flex wire protocol /
commands?
I am familiar with i2c, and while my rig is the sdr1k I thought I might
create a flex wire emulation from the sdr1k to enable easier future
migrations
Jim - W4YXU
Jim Lux wrote:
At 12:42 PM 10/13/2007, Gerald
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bob Tracy
Sent: Thursday, October 11, 2007 12:40 PM
To: Dave Blaschke; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Band data output from SDR-5000
Dave,
Currently there is only one way to get band data from either Flex radio
Bob,
You wrote, Currently there is only one way to get band data from either
Flex radio and that is via CAT.
I respectfully disagree. The X2 connector on the SDR-1000 can easily be set
up to give band data. This functionality is missing on the Flex-5000,
however. The world awaits a FlexWire
I am anxiously awaiting the arrival of my SDR-5000.
As I wait, I continue studying the manual. Here is my dilemma: I
operate all HF bands as well as 6 and 2. On every radio I have owned,
I demanded an output from that which would let me get the band data.
I have always built the required
.
73,
Bob K5KDN
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dave Blaschke
Sent: Thursday, October 11, 2007 12:13 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Band data output from SDR-5000
I am anxiously awaiting the arrival of my SDR-5000.
As I
Some of what I developed to bandswitch my Quadra may be useful,
especially if you already run one of the common logging/contesting
programs when you operate, as I always do. I am now using this same
setup with my SDR-1000.
See http://www.ab4oj.com/quadra/w4uk.html
Jerry W4UK
At 01:13 PM
12 matches
Mail list logo