I was going to ask a question here today and was surprised to find that it
was answered (I think) before I asked it! You guys are good!
I was going to ask if I connect my Z3801's 10 MHz output to my F5K will the
Flex inherit the same accuracy as the standard?
I think the Stu might have
I've used the F5K with an external reference and can verify that it
works; you can see WWV's carrier jump when you plug and unplug the
external reference.
However, perhaps Tim could verify something for the time-nuts amongst
us: is the clock for the ADC locked to the same reference as the
I have a question concerning the frequency accuracy of my 5KA.
When I tune to WWV 10.0 MHz. the digital readout on the lower right hand
bottom of the Panadapter reads -19.1 Hz 9.999 981 MHz. My sampling rate
is 192.KHz. Does this mean I am off frequency by almost 20 Hz? If so, how
does
:26 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Frequecy Off?
I have a question concerning the frequency accuracy of my 5KA.
When I tune to WWV 10.0 MHz. the digital readout on the lower right hand bottom
of the Panadapter reads -19.1 Hz 9.999 981 MHz. My sampling rate is
192.KHz
I'd like info on this as I have the same problem 73...Jordan
- Original Message -
From: AB2CD ab...@bellsouth.net
To: FlexRadio@flex-radio.biz
Sent: Wednesday, October 28, 2009 4:26 PM
Subject: [Flexradio] Frequecy Off?
I have a question concerning the frequency accuracy
Dan,
Checkout page 69 of the Users Guide. Describes how to use the Setup =
General + Calibrate menu to auto calibrate to WWV. Should get you
within a quarter of a cycle.
Hope this helps
73,
Dudley
WA5QPZ
AB2CD wrote:
I have a question concerning the frequency accuracy of my 5KA.
...@shaw.ca
To: Dudley Hurry jhu...@austin.rr.com; AB2CD ab...@bellsouth.net
Cc: FlexRadio@flex-radio.biz
Sent: Wednesday, October 28, 2009 8:35 PM
Subject: Re: [Flexradio] Frequecy Off?
DudleyI've gone through that process and the nearest I can get is +/-
7hz using WWV @ 10MhzIf I change
/KnowledgebaseArticle50175.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jordan
Sent: Wednesday, October 28, 2009 10:46 PM
To: Dudley Hurry; AB2CD
Cc: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Frequecy Off
...@austin.rr.com
To: AB2CD ab...@bellsouth.net
Cc: FlexRadio@flex-radio.biz
Sent: Wednesday, October 28, 2009 8:13 PM
Subject: Re: [Flexradio] Frequecy Off?
Dan,
Checkout page 69 of the Users Guide. Describes how to use the Setup =
General + Calibrate menu to auto calibrate to WWV. Should get you
Yes, there's a BNC jack on the rear panel for connecting an external 10MHz
reference.
Jim KQ6EA
--- On Wed, 10/28/09, Richard W. Solomon w1...@earthlink.net wrote:
From: Richard W. Solomon w1...@earthlink.net
Subject: Re: [Flexradio] Frequecy Off?
To: FlexRadio@flex-radio.biz
Date
: [Flexradio] Frequecy Off?
Is there a way to connect an external reference standard to the F5K ??
73, Dick, W1KSZ
-Original Message-
From: Jordan outposte...@shaw.ca
Sent: Oct 28, 2009 7:35 PM
To: Dudley Hurry jhu...@austin.rr.com, AB2CD ab...@bellsouth.net
Cc: FlexRadio@flex-radio.biz
Subject
] Frequecy Off?
Yes, there's a BNC jack on the rear panel for connecting an external 10MHz
reference.
Jim KQ6EA
--- On Wed, 10/28/09, Richard W. Solomon w1...@earthlink.net wrote:
From: Richard W. Solomon w1...@earthlink.net
Subject: Re: [Flexradio] Frequecy Off?
To: FlexRadio@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Wednesday, October 28, 2009 8:15 PM
To: Richard W. Solomon; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Frequecy Off?
Yes. It is referenced in the FLEX-5000 Owner's Manual.
-Tim
-Original Message-
From
; FlexRadio@flex-radio.biz
Sent: Thursday, October 29, 2009 12:22 AM
Subject: Re: [Flexradio] Frequecy Off?
For those that are interested, the Trimble Thunderbolt is a 10 MHz GPS
disciplined oscillator with a high stability oven stabilized oscillator
- the unit is small and was originally
14 matches
Mail list logo
