As far as I can tell the SFI is at it's highest point right now for this entire
solar cycle. I think that the highest point prior to this is 179 Hopefully good
DX will follow!
Zack
N8FNR
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Both Harry, VA3EC, and myself are running Flex 3000s with decent PCs (mine’s a
fairly new I7 quad core running the Flex at 2% CPU using Windows 7) and we’re
both experiencing significant and obvious lag when tuning with a mouse or
especially the FlexKnob. We are using the latest edition of
Knobs? Get over it. Knobs or no knobs is not the issue. Performance,
ergonomics (other than knobs) cost/performance, support after sales, active,
knowledgeable, and helpful user group(s), and so forth, these are criteria
by which a reasoned decision is made. Besides if you want a super
Craig, it does not take long to leave the knobs and switches behind, at
least for most of us. In my case, it was good riddance. When I use my
backup rig, an FTDX3000, I think, Sheesh, I'm glad I don't have to put up
with this every day.
That being said, there are plenty of SDR owners who will
Robert:
I know we don't have a PR40 specific but as mentioned the 781 is very close
as far as the audio is concerned.
When you do get it set up just go to the /SETUP/TRANSMIT page and SAVE a
new setting called PR40. I actually have many saved profiles: Greg-VHF,
Greg-DX, Karla-MARS, etc.
The
Hi Matthew and Steve,
KJ4TN’s message about the S3 noise level minimum on the Flex 3K describes my
experience as well. While it varies from band to band a bit, my S Meter never
approaches zero, including when the antennas are disconnected or when I am
connected directly to the dummy load.
It is also in the Release Notes too.
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web: www.flexradio.com http://www.flexradio.com
logo
On 1/4/2014
There is a small plastic screw near the bottom of the meter, make sure that
it is adjusted to zero with the power off.
73 Ross K9COX
-Original Message-
From: Bill Feldkamp
Sent: Monday, January 06, 2014 10:06 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] S Meter minimum
Hi
Ross K9COX,
I assume you are joking, on a flex there are no hard meters it is all software
and no screw to adjust.
Dale
KB5VE
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ross
Stenberg
Sent: Monday, January 06, 2014 12:10 PM
To:
Make sure none of the tubes inside glow bluish, except for the voltage
regulators.
73 - Mike WA8BXN
---Original Message---
From: Dale Hankins
Date: 1/6/2014 1:21:53 PM
To: 'Ross Stenberg'; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
I don't see small stuff like I did when I was younger. Is the screw head
straight slot, Phillips, torx, star, or what?
Patrick NJ5G
-Original Message-
From: Ross Stenberg
Sent: Monday, January 06, 2014 12:09 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
Is it a phillips head are straight screw?
Thanks for your good humor.
Matthew-KJ4TN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
No, it's a pot that you need to adjust. BobAC8O
Do THIS before eating carbs #40;every time#41;
1 EASY tip to increase fat-burning, lower blood sugar decrease fat storage
Is that a standard or metric Phillips head?
On Jan 6, 2014 2:42 PM, hmattc...@juno.com hmattc...@juno.com wrote:
Is it a phillips head are straight screw?
Thanks for your good humor.
Matthew-KJ4TN
___
FlexRadio Systems Mailing List
Ross,
The present temperature is 8 below zero and at 7 this morning it was minus
17 and in a few moments I will have to take care of outdoor chores so when I
saw your comment on adjusting the PowerSDR S meter screw I did choke a
little and then did feel warmer!
73
Lee K9WRU
- Original
According to old man Rhee, You know him right? The old guy with just one
tooth. Anyway old one tooth rhee says it is a Whitworth style head.
Patrick NJ5G
-Original Message-
From: Jerry Falletta
Sent: Monday, January 06, 2014 2:07 PM
Cc: FlexRadio Reflector
Subject: Re: [Flexradio]
Ross
I tried to follow your directions, but my S meter disappears when I turn
the power off. :-)
Terry
On 06/01/2014 13:09, Ross Stenberg wrote:
There is a small plastic screw near the bottom of the meter, make sure
that it is adjusted to zero with the power off.
73 Ross K9COX
But surely on anything as hi-tech as a FlexRadio the S-meter screw would
have at least a security Torx adjuster.
73
Alan NV8A
On 01/06/14 03:24 pm, Patrick Greenlee wrote:
According to old man Rhee, You know him right? The old guy with just one
tooth. Anyway old one tooth rhee says it is a
In repairing screw driver scratches on a monitor, it is best to use a belt
sander or palm sander?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Hi,
I have been having great success using the 3000 with pactor. And marginal
success with amtor.
Has anyone good a measure of the turnaround time of the flex on an I7 pc...
roughly.
Cheers
Dave
Sent from Samsung Mobile
___
FlexRadio Systems
An electric drill works best :)
de Paul, W8AEF
-Original Message-
From: Randy Hall
Sent: Monday, January 06, 2014 3:02 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
In repairing screw driver scratches on a monitor, it is best to use a belt
sander or palm
I have been able to zero my meter by using a metric adjustable wrench.
Gedas, W8BYA
Gallery at http://w8bya.com
Light travels faster than sound
This is why some people appear bright until you hear them speak.
- Original Message -
From: Paul Playford w8...@q.com
To: Randy Hall
A hydrospanner also works well.
73s,
Alan
WA4SCA
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On
Behalf Of Gedas
Sent: Monday, January 06, 2014 6:20 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
I have been able to zero my
Left hand or right hand?
Paul
-Original Message-
From: Alan
Sent: Monday, January 06, 2014 5:36 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
A hydrospanner also works well.
73s,
Alan
WA4SCA
___
FlexRadio
Andit never will.
The s-meter shows the integrated power at the antenna port within the RX
filter. Make the RX filter smaller and the s-meter reading will decrease.
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone:
25 matches
Mail list logo
