A while back I mentioned that I was going to try an experiment to remote the
Flex 5000 A. I have been delayed due to weather as in UPS wouldn’t deliver
needed cables. I have the cables now and the experiment is underway.
Problem: I would like to remote a F5K a couple hundred feet from the
Update: if you coil up the 50 ft Cat5e cable into a small tight coil and
squeeze it into close proximity thus maximizing the inductance it crashes
PSDR. This is the only thing I have tried so far that causes a problem. In
actual use I suspect this is not a problem.
Patrick NJ5G
Here is my COTS hardware source:
http://www.usbfirewire.com/Parts/rr-firenex-s800.html In my experience
these are good reliable folks to deal with.
-Original Message-
From: Patrick Greenlee
Sent: Tuesday, December 10, 2013 8:50 AM
To: flexradio@flex-radio.biz
Subject: Re:
I would be interested in how susceptible this configuration is to high
levels of RF such asthe radio being in the near field of a 1500W
transmission.
Tim Ellison
On 12/10/2013 9:50 AM, Patrick Greenlee wrote:
Update: if you coil up the 50 ft Cat5e cable into a small tight coil
and squeeze it
With the results of very close physical cable bunching, you are getting
cross talk between the two cable ends and the problems that you noticed.
Like Tim, I might expect problems at some power level. I looked and
shielded Cat5 is available. I have no experience with it. When I was
working as a
I'll throw this one in:
In one of my previous lives, the team that developed the IEEE-1394A and B
OHCI controllers and Physical Layer chips worked in my department. They
were seriously smart people so I mostly left them alone... but some of it
did rub off. What we learned early in the B
I don't claim that this is a totally perfect solution unharmed by any and
all possible situations. Due to the number of irons I have in the fire: I
am also a cowboy running a Black Angus cattle ranch, have a big honey-do
list, have many other hobbies including but not limited to
What about using a fiber solution?
On Tue, Dec 10, 2013 at 9:42 AM, Patrick Greenlee
patric...@windstream.netwrote:
A while back I mentioned that I was going to try an experiment to remote
the Flex 5000 A. I have been delayed due to weather as in UPS wouldn’t
deliver needed cables. I have
8 matches
Mail list logo
