very nice write-up, michael. well done! 73, w5xz, dan
From: Michael Babineau mbabin...@magma.ca
To: phi...@mac.com
Cc: flexradio@flex-radio.biz
Sent: Wednesday, September 18, 2013 1:56 PM
Subject: [Flexradio] Flex-1500 on CW (was Re: Flex 3000 for DX'ing and
darryl, read richard's post 3 times...he's a 'guru'FWIW, 73, w5xz, dan
From: Richard Clafton rclaf...@riroc.com
To: 'Darryl Wagoner' dar...@wagoner.me; FlexRadio@flex-radio.biz
Sent: Sunday, September 1, 2013 3:57 PM
Subject: Re: [Flexradio] High DPC
matt, can you key the intermediate amp with a ptt line?
73, dan, w5xz
From: hmattc...@juno.com hmattc...@juno.com
To: nealk...@gmail.com
Cc: flexradio@flex-radio.biz
Sent: Sunday, August 25, 2013 5:15 PM
Subject: Re: [Flexradio] Looking for Anyone using a
. amp stop chattering...
maybe? 73, w5xz, dan
From: Douglas Hubbs k4...@mpinet.net
To: dan edwards w...@att.net
Sent: Sunday, August 25, 2013 6:20 PM
Subject: Re: [Flexradio] flex 1500 with 2 finals, cascaded
Dan,
As a AL-811H owner, I would put forth
i THINK the DXLabs launcher can do all that stuff for youck with dave aa6yq
73, w5xz, dan
--- On Fri, 6/14/13, Ronald G. Parsons w5...@w5rkn.com wrote:
From: Ronald G. Parsons w5...@w5rkn.com
Subject: [Flexradio] Creating a startup script
To: FlexRadio Reflector FlexRadio@flex-radio.biz
the software changes a LOT faster than the hardwareyou read the update
notes... it just gets better and betteri've never seen an owners manual
that was NOT 'beta'... but it doesn't matter...marvelous rigs, these
Flex's..all, IMHO.73 w5xz, dan
--- On Sat, 5/25/13, N1naz
i THINK registered owners DO get schematics, though they're not for
distribution, if you ask for them..i HAVE the schematics for my F3k...not sure
CuSDR is for a QSD / QSE rig, though..
73, w5xz, dan
--- On Fri, 5/24/13, Bradley Feldman brad...@bradleyloritheo.com wrote:
From: Bradley Feldman
i have a pair of Acer A221HGV's...a 'black friday special'... $99they seem
fine..
73, w5xz, dan
--- On Sun, 3/24/13, Michael Ruttenberg mjruttenb...@gmail.com wrote:
From: Michael Ruttenberg mjruttenb...@gmail.com
Subject: [Flexradio] Need monitor recommendation (RFI-proof)
To:
Yae-Ken-Com, i think
--- On Fri, 2/22/13, Ross Stenberg ross.stenb...@charter.net wrote:
From: Ross Stenberg ross.stenb...@charter.net
Subject: Re: [Flexradio] Video interview with Greg K5JG on SDR technology and
the new FLEX-6000
To: flexradio@flex-radio.biz
Date: Friday, February 22, 2013,
HOT DIGGETTY DAWG !!!
w5xz, dan
--- On Tue, 1/22/13, Greg Jurrens g...@flexradio.com wrote:
From: Greg Jurrens g...@flexradio.com
Subject: Re: [Flexradio] 6000 at Orlando?
To: Jerry Flanders jefland...@comcast.net
Cc: flexradio@flex-radio.biz
Date: Tuesday, January 22, 2013, 9:57 PM
Jerry:
Not
i too like DxLab VERY much, FWIW...and i probably don't use 10 percent of
it's many many features.works NICE !! 73 , w5xz, dan
--- On Sat, 12/22/12, Richard Lawn rjl...@gmail.com wrote:
From: Richard Lawn rjl...@gmail.com
Subject: [Flexradio] Dxlabs software
To: flexradio@flex-radio.biz
in the mode panel...Is this documented someplace that I have overlooked? 73,
w5xz, dan
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
of the
entire sampled bandwidth without demodulation. So if you
are sampling at 96 KHz you will see +/- 48 KHz of spectrum
Tim Ellison
On 11/6/2012 11:23 AM, dan edwards wrote:
in the mode panel...Is this documented someplace that I have
pair of rd70hhf's in push-pull, i THINK73, w5xz
--- On Wed, 10/17/12, Nige G7CNF g7cnf.n...@gmail.com wrote:
From: Nige G7CNF g7cnf.n...@gmail.com
Subject: [Flexradio] Blown finals
To: flexradio@flex-radio.biz
Date: Wednesday, October 17, 2012, 11:54 AM
Hi guys.
Following an unexpected
i find a second rx with very wide rx filter and headphones is useful, while
tx'ing into a dummy load,. FWIWmy equalizer settings are for a
cheap Ripoff Shack dynamic mike, and would be useless to almost everybody..
73, w5xz, dan
--- On Fri, 10/5/12, Gary Robertson
hey, I that that was another of Murphy's Laws, selective gravitation..
any part dropped will land where it can do the most damage...something like
that...
73, w5xz, dan
--- On Fri, 9/7/12, Ralph W5JGV w5...@w5jgv.com wrote:
From: Ralph W5JGV w5...@w5jgv.com
Subject: Re: [Flexradio] Fwd: (No)
sorry, i keep forgetting; there ARE guys who hate cw...my mistake..73, w5xz
--- On Thu, 8/23/12, Richard Clafton rclaf...@riroc.com wrote:
From: Richard Clafton rclaf...@riroc.com
Subject: RE: [Flexradio] Pecker anyone ?
To: 'dan edwards' w...@att.net, flexradio@flex-radio.biz, 'W1JCW'
w1
well, my 30+ yr old Osborne I was still working when i tossed
itfinally...73, w5xz, dan
cp/m, man that was 'fun'...
--- On Wed, 8/22/12, Mickey Baker fishflor...@gmail.com wrote:
From: Mickey Baker fishflor...@gmail.com
Subject: Re: [Flexradio] Lots of lightly used Flex Radios for sale.
To:
mine does that too. i think it's your 'punishment' for trying to transmit
outside the band( ?? )
73, w5xz, dan
--- On Wed, 7/4/12, Robert Costa, KB6QXM kb6...@yahoo.com wrote:
From: Robert Costa, KB6QXM kb6...@yahoo.com
Subject: [Flexradio] Out of band crash
To: FlexRadio@flex-radio.biz
or, something as simple as an active vertical...e.g. a hi-Z plus 6 with 10 to
20' vertical against a single short ground rod...several other small active
antennas have very wide bandwidth also..73, w5xz, dan
--- On Mon, 6/4/12, John Swink jms...@wowway.com wrote:
From: John Swink
don't we still look for and un-shared interrupt in device manager? 73, w5xz,
dan
--- On Fri, 6/1/12, Neal Campbell nealk...@me.com wrote:
From: Neal Campbell nealk...@me.com
Subject: Re: [Flexradio] FIRE WIRE CARD
To: y...@aol.com
Cc: flexradio@flex-radio.biz
Date: Friday, June 1, 2012, 7:53
if i try a pci firewire card in different slots, i can usually find one...have
to play 'musical chairs' though...
--- On Fri, 6/1/12, Neal Campbell nealk...@me.com wrote:
From: Neal Campbell nealk...@me.com
Subject: Re: [Flexradio] FIRE WIRE CARD
To: dan edwards w...@att.net
Cc: y...@aol.com
what, no 'speech recognition' for an ssb skimmer ? man, i feel cheated...ha
w5xz, dan
--- On Thu, 5/17/12, Greg a...@cablespeed.com wrote:
From: Greg a...@cablespeed.com
Subject: Re: [Flexradio] Game changer - my wish
To: Gerald Youngblood ger...@flex-radio.com
Cc: vtnn...@comcast.net
now THAT would be interesting, single op, multi-multi ?? 73, w5xz, dan
--- On Tue, 5/15/12, Jim Fuller (N7VR) n...@fuller.net wrote:
From: Jim Fuller (N7VR) n...@fuller.net
Subject: Re: [Flexradio] Imagine digital starting at the antenna connector...
To: 'Brian Lloyd' brian-wb6...@lloyd.com
IMHO, there may be something to this idea. when making decent rate on cw
from W5WMU with a solid Eu run, i'm pretty sure my typing errors hurt my
scorelogging with N1MM...then again, a round or 2 with 'mavis beacon
teaches typing' would prob do the trick
still, interesting idea...my
and speech recognition might give us an 'ssb skimmer' ?? THAT would be
sumthin...
--- On Thu, 4/19/12, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: Re: [Flexradio] Off Flex Topic- Voice Recognition for Logging
and/orControl
To: [FlexRadio] FlexRadio@flex-radio.biz
maintenance program switches in checks
the confirmed LOTW contacts
and when appropriate fills out the application and sends it to ARRL via e-mal
for my award...
all while I’m at the beach – is that about right?
don, kd6hq
From: dan edwards
Sent: Thursday, April 19, 2012 2:28 PM
my $0.02 worth
I WAS apprehensive about facebook...but cratered since my high school class
reunion was going therewasted a ridiculous amount of time trying to make an
interesting pagenoboby looked at it, outside of immediately family...took
the good stuff off...
overall, it's pretty
welcome to Flex world Brian! 73 OT, w5xz, dan...
--- On Tue, 2/14/12, Brian Miller brianmil...@xtra.co.nz wrote:
From: Brian Miller brianmil...@xtra.co.nz
Subject: Re: [Flexradio] FLEX-3000 FLUCTUATING CW OUTPUT POWER
To: t...@flexradio.com, Jim Jannuzzo jsqu...@msn.com
Cc:
stereo with BIN enabled is NICE !! i THINK it helped me work YB1CCF on 160
cw this morning for the first time !!. :-D
creative T-20 powered speakers here. I can take out the TV out here in the
garage, ha.
73, w5xz, dan
--- On Sat, 1/21/12, ik4...@iperspazio.com ik4...@iperspazio.com
awww shucks, i was sending in the swedish bikini team !!! ha ha ha...73, w5xz,
dan
--- On Fri, 1/13/12, Bob McGwier n...@flex-radio.com wrote:
From: Bob McGwier n...@flex-radio.com
Subject: Re: [Flexradio] FlexMemory v2.0.1 Released
To: kb6...@yahoo.com, Ray, K9DUR k9...@rnacs.com,
good job !! 73, w5xz, dan
--- On Wed, 1/4/12, W2BLC w2...@necoastal.net wrote:
From: W2BLC w2...@necoastal.net
Subject: [Flexradio] [FlexRadio] Re: Transmit spikes - continuing problem
To: flexradio@flex-radio.biz
Date: Wednesday, January 4, 2012, 1:37 PM
I have found something that stops
RATS!! i really really like Chrome!! dang...73, w5xz, dan
--- On Wed, 1/4/12, Neal Campbell abrohamn...@gmail.com wrote:
From: Neal Campbell abrohamn...@gmail.com
Subject: [Flexradio] Read This Please!
To: FlexRadio List flexradio@flex-radio.biz
Date: Wednesday, January 4, 2012, 2:20 PM
I have
are there any other 'under the hood' settings to tweak?
--- On Wed, 1/4/12, Neal Campbell abrohamn...@gmail.com wrote:
From: Neal Campbell abrohamn...@gmail.com
Subject: Re: [Flexradio] Read This Please!
To: dan edwards w...@att.net
Cc: FlexRadio List flexradio@flex-radio.biz
Date: Wednesday
ha! i am holding out for Titaniumor Kryptonite..tnx tip73,
w5xz, dan
--- On Wed, 1/4/12, Ron Kolarik rkola...@neb.rr.com wrote:
From: Ron Kolarik rkola...@neb.rr.com
Subject: Re: [Flexradio] Read This Please!
To: dan edwards w...@att.net, FlexRadio List flexradio@flex-radio.biz
i guess some of us REAL old timers will always feel that a REAL ham can copy
20 wpm CW or better, with no pencil...
but only the really crusty old farts ha ! 73, w5xz, dan
--- On Tue, 1/3/12, William H. Fite omni...@gmail.com wrote:
From: William H. Fite omni...@gmail.com
Subject: Re:
i sweated BULLETS to copy 13 wpm in Dallas in 1969
--- On Tue, 1/3/12, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: Re: [Flexradio] Flex 1500 using External Transmitter for AM
To: Steven Hess flameb...@gmail.com, William H. Fite omni...@gmail.com
Cc: FlexRadio
which ram sticks did you go with, tim? 73, w5xz, dan
--- On Mon, 12/19/11, Tim Ellison, W4TME t...@flex-radio.com wrote:
From: Tim Ellison, W4TME t...@flex-radio.com
Subject: Re: [Flexradio] AMD chip
To: flexradio@flex-radio.biz
Date: Monday, December 19, 2011, 2:48 PM
Neal just told me...
stu
I've been working on this issue for 'a while..'
see: http://thewallerflag.wikispaces.com/
currently, 'up against the wall'but i'm on to something elsewill post,
when my cold settles down and i have time to implement another idea...
73. w5xz, dan
--- On Sun, 12/18/11, Stu
AND, K1LT, is tackling this MUCH more hi tech...several soft rock receivers,
one for each antenna, all using the same LO, and combining them in Linux, using
Jack... where he says you can control amplitude and phase 'easily' ( ?? )
73, w5xz
--- On Mon, 12/19/11, dan edwards w...@att.net wrote
i THINK the ESC stuff only allows two antennas2 element arrays are not
that interesting, to me anyway...you can get a null, but the 1/2 power
beamwidth and RDF are not that great...
just my $0.02 cents worth...73 merry christmas...w5xz, dan
--- On Mon, 12/19/11, dan edwards w...@att.net
wow, that's a heck of a deal! has Neil 'blessed' it ? 73, w5xz, dan
--- On Fri, 12/9/11, Bob McGwier n...@flex-radio.com wrote:
From: Bob McGwier n...@flex-radio.com
Subject: Re: [Flexradio] Heil Headset and FLEX-5000
To: carter...@verizon.net
Cc: flexradio@flex-radio.biz
Date: Friday,
that's an interesting final...a pair of RD-100's in push pull with 48 volts on
the drains..
73, w5xz, dan
--- On Mon, 11/28/11, Tony Estep estept...@gmail.com wrote:
From: Tony Estep estept...@gmail.com
Subject: Re: [Flexradio] Interesting 100W amp for Flex 1500
To: FlexRadio reflector
THANKS Ray, now THAT'S a 'keeper'.73, w5xz, dan
--- On Sat, 11/5/11, Ray, K9DUR k9...@rnacs.com wrote:
From: Ray, K9DUR k9...@rnacs.com
Subject: Re: [Flexradio] First time using N1MM, and I have a question
To: 'Mark Lunday' wd4...@triad.rr.com, FlexRadio@flex-radio.biz
Date: Saturday,
well, I have to 'chime in..' after hesitating...
to me, 'it depends..' on what noise you're trying to get rid ofI spend
most of my time on 160m cw, but in the suburbs with all sorts of 'mystery
signals'...using small receiving antennas, which require external
pre-amps...it's a curious
hey, wait a minuteisnt it saying 'solid state finals are for fat
cats...welcome to the club..'
a 'boob' who loves tube finals...73, w5xz, dan
--- On Sun, 10/2/11, William H. Fite omni...@gmail.com wrote:
From: William H. Fite omni...@gmail.com
Subject: Re: [FlexEdge] [Flexradio] Help, I
John
another approach might be to UN-plug as much stuff as you can from the radio,
and see if the problem goes awaymy experience with ferrites has been 'get
the big ones'.. so you can put more than one turn through them. remember ' N
squared ' ??...and, like others, have found 31 mix
Subject: Re: [Flexradio] Flex makes a great CW radio
To: dan edwards w...@att.net
Cc: FlexRadio@flex-radio.biz, W8HW w...@att.net
Date: Tuesday, September 6, 2011, 4:17 AM
On Mon, Sep 5, 2011 at 8:02 PM, dan edwards w...@att.net wrote:
BUT.the fact that custom cw filters dont't stick still
sorry, better formatting this time
--- On Tue, 9/6/11, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: Re: [Flexradio] Flex makes a great CW radio
To: Brian Lloyd brian-wb6...@lloyd.com
Cc: FlexRadio@flex-radio.biz, W8HW w...@att.net
Date: Tuesday, September 6, 2011
-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web: www.flexradio.com http://www.flexradio.com
logo
/Tune In Excitement^(TM)
PowerSDR^(TM) is a trademark of FlexRadio Systems/
On 9/5/2011 11:02 PM, dan edwards wrote:
BUT.the fact
t...@flex-radio.com
Subject: Re: [Flexradio] Flex makes a great CW radio
To: dan edwards w...@att.net
Cc: flexradio@flex-radio.biz, t...@flexradio.com
Date: Tuesday, September 6, 2011, 12:33 PM
I don't know what to tell you, but it works for
me.
I set
--- On Tue, 9/6/11, Ray, K9DUR k9...@rnacs.com wrote:
From: Ray, K9DUR k9...@rnacs.com
Subject: RE: [Flexradio] Flex makes a great CW radio
To: t...@flexradio.com, 'dan edwards' w...@att.net
Cc: flexradio@flex-radio.biz
Date: Tuesday, September 6, 2011, 12:59 PM
Dan,
Are you right-clicking
last boyfriend?
get over it
73, w5xz, dan
--- On Tue, 9/6/11, Tim Ellison, W4TME t...@flex-radio.com wrote:
From: Tim Ellison, W4TME t...@flex-radio.com
Subject: Re: [Flexradio] Flex makes a great CW radio
To: dan edwards w...@att.net
Cc: t...@flexradio.com, K9DURRay k9...@rnacs.com
from
there.
On 9/6/2011 9:16 AM, dan edwards wrote:
ah HA !!
so, if I want a 2 khz wide CWU filter for tuning dead bands for weak signals,
and set low to 100 hz and high to 2100 hz, i MUST set the cw pitch to 1100 hz
?
ok. except now i am 'married' to a pitch a bit too high for personal
setup / general / hardware config..low center of screen..
73, w5xz, dan
--- On Mon, 9/5/11, Burt k1...@yahoo.com wrote:
From: Burt k1...@yahoo.com
Subject: Re: [Flexradio] You have asked another good question
To: FlexRadio@flex-radio.biz
Date: Monday, September 5, 2011, 4:27 PM
I do not see
BUT.the fact that custom cw filters dont't stick still irritates the
heck out of me...
73, w5xz, dantuning 'dead bands'...
--- On Tue, 9/6/11, W8HW w...@att.net wrote:
From: W8HW w...@att.net
Subject: [Flexradio] Flex makes a great CW radio
To: FlexRadio@flex-radio.biz
Date:
at my house, anyway, anytime i download and want to install nearly anything
under Win7, FIRST, I have to right click on the file and look at 'properties',
and UN-block, and click on 'run as administrator'
my $0.02 worth. 73 w5xz, dan
--- On Sun, 7/24/11, Bill w...@billnjudy.com wrote:
woaaHHH...
a 'blonde woman doctor' ?
dont tell Cindy...she's a blonde female RN...
ha ha ha ha
73, w5xz, dan
--- On Sat, 7/23/11, Frank Coffey fran...@comcast.net wrote:
From: Frank Coffey fran...@comcast.net
Subject: [Flexradio] raid arrays
To: flexradio@flex-radio.biz
Date: Saturday,
or been there, done that, bought the t-shirt . as we say in Texas...
73, w5xz, dan
--- On Tue, 6/21/11, Bill w...@billnjudy.com wrote:
From: Bill w...@billnjudy.com
Subject: Re: [Flexradio] All was well Until
To: flexradio@flex-radio.biz
Date: Tuesday, June 21, 2011, 1:56 AM
The
well, the pink 'viagra for her' will definitely 'tune in some excitement'ha
ha ha
73, w5xz, dan
--- On Thu, 6/9/11, David Walker vk...@bigpond.com wrote:
From: David Walker vk...@bigpond.com
Subject: Re: [Flexradio] (no subject)
To: flexradio@flex-radio.biz
Date: Thursday, June 9, 2011,
is it just me??
i have followed the DH1TW's dj interface with interest, since my first attempt
at SS phone put me on 65 mhz way way too many times...ruinining the last
QSO.. trying to log with N1MM..Tobias' effort looks great...
BUT...my 'issue' with the flex is this: TOO MANY BOXES...and now
well, that sure makes ethernet look 'good'.plus, ethernet wires are
'twisted pairs' which 'mr.- RFI - solutions - himself' Jim, K9YC, sure
likesfor common mode rejection..
73, w5xz, dan
--- On Thu, 5/5/11, Brian Lloyd brian-wb6...@lloyd.com wrote:
From: Brian Lloyd
wellIMHO, i think the cited factors may slightly overstate the
case.. of course 'it depends' on
1: what kind of antenna you use...an end fed half wave longwire brought
directly into the shack is GOING to put you in the presence of strong RF
fields that usually accompany amateur
from 'the bottom'i use a radio shack $3.00 dynamic mike with 0.1 uFd in
series with the hot lead...roll off the lows like crazy with the 10 band
equalizer...use 'stomp to talk' foot switch.for a guy who spends 90% of his
time on cw, this is just right, ha !
73, w5xz, dan
--- On Tue,
nice job ken!
i was thinking about going 'the other way'...putting my flex3000 inside my pc
case, ha !
73, w5xz, dan
--- On Wed, 4/20/11, David McKenzie k1...@vhfwiki.com wrote:
From: David McKenzie k1...@vhfwiki.com
Subject: Re: [Flexradio] Flex 5000 C Home Brew Computer Upgrade
To: Ken
i thought it was AUNT nanna rosanna danna..?? 73, w5xz
--- On Sat, 4/16/11, Burt k1...@yahoo.com wrote:
From: Burt k1...@yahoo.com
Subject: [Flexradio] It's Always something
To: Reflector flexradio@flex-radio.biz, David Kennett w8...@yahoo.com
Date: Saturday, April 16, 2011, 4:30 PM
Many
your '4 lb shoulder mounted weapon' is your most powerful one...
--- On Wed, 4/6/11, Mark Lunday wd4...@triad.rr.com wrote:
From: Mark Lunday wd4...@triad.rr.com
Subject: Re: [Flexradio] Notch Filter and PB tuning?
To: 'K9DUR' k9...@rnacs.com, n...@comcast.net
Cc: flexradio@flex-radio.biz
Date:
I thought the idea was to use the lowest acceptable frame rate to minimize cpu
/ L2 cache loading ?? even on med speed cw, 15 fps seems to show everybody...
73, w5xz, dan
--- On Tue, 4/5/11, Brian Lloyd brian-wb6...@lloyd.com wrote:
From: Brian Lloyd brian-wb6...@lloyd.com
Subject:
no sleep? wait till you get it !! 73, w5xz, dan
--- On Wed, 4/6/11, Gedas w8...@mchsi.com wrote:
From: Gedas w8...@mchsi.com
Subject: [Flexradio] Yippy !
To: FlexRadio@flex-radio.biz
Date: Wednesday, April 6, 2011, 1:58 AM
Hot digiti-dog, I got notice that my F5K has shipped today !
I found the mods in 'ch 1' worked VERY well in my dad's old sb-200
http://www.xs4all.nl/~pa0fri/Lineairs/SB200/sb200eng.htm
worked very well...now I think the HV tranny is under-sized !!
FWIW, w5xz, dan
--- On Sat, 3/19/11, Brian Lloyd brian-wb6...@lloyd.com wrote:
From: Brian Lloyd
i agree! they'll have to pry my F3k from my cold, dead hands...73, W5XZ, dan
--- On Fri, 3/4/11, Mickey Baker fishflor...@gmail.com wrote:
From: Mickey Baker fishflor...@gmail.com
Subject: Re: [Flexradio] PowerSDR 2.0 Release Candidate 1 status
To: Gerald Youngblood ger...@flexradio.com
Cc:
i cant seem to stop droolingw5xz, dan
--- On Thu, 2/10/11, Bob McGwier n...@flex-radio.com wrote:
From: Bob McGwier n...@flex-radio.com
Subject: Re: [Flexradio] CW Side Tone Lag
To: n...@comcast.net
Cc: FlexRadio@flex-radio.biz
Date: Thursday, February 10, 2011, 4:20 PM
I cannot wait for
does that fall in the category if i tell you, i'll have to kill you ...?
w5xz
--- On Thu, 2/10/11, Tim Ellison telli...@itsco.com wrote:
From: Tim Ellison telli...@itsco.com
Subject: Re: [Flexradio] CW Side Tone Lag
To: Jerry Gardner w6uvf...@gmail.com
Cc: FlexRadio@flex-radio.biz
AMEN brother !!
w5xz
--- On Fri, 1/21/11, W6SDM Steve dd.maricopa...@gmail.com wrote:
From: W6SDM Steve dd.maricopa...@gmail.com
Subject: [Flexradio] Now this is diplomacy...
To: flexradio@flex-radio.biz
Date: Friday, January 21, 2011, 7:52 PM
*Both Waters and Stanton and Martin Lynch and Sons
boy thats the truth. John also fathered the 'W5GI mystery antenna', and
the W5GI D-3 plus , which lives on at W5WMU, my favorite super-station. I
spoke with him about it within the last couple years...
Its a glorious thing to behold, all 405' feet of it, all at 200'a real
killer on 75m
i wonder what the passmarks are for your other machines, neal.
73, w5xz, dan
--- On Sun, 1/9/11, Paul Delaney - K6HR paul.hamra...@verizon.net wrote:
From: Paul Delaney - K6HR paul.hamra...@verizon.net
Subject: Re: [Flexradio] [Commercial] New member in the Abroham Neal family!
To: 'Neal
--- On Wed, 1/5/11, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: Re: [Flexradio] Plasma TV RF noise
To: Gary Warner garyw...@gmail.com
Date: Wednesday, January 5, 2011, 9:52 PM
AA1K advised on the low band reflector recently that a KW on 6m pointed right
at the set
hey, wait a minute, stoich is NOT max HP...not in texas anyway..rather
off-topic, but...
73, w5xz, dan
--- On Tue, 12/14/10, Brian Lloyd brian-wb6...@lloyd.com wrote:
From: Brian Lloyd brian-wb6...@lloyd.com
Subject: Re: [Flexradio] Two simple Questions - Replies
To: Tim Ellison
isn't 'stoich' 14.7 : 1 ???
--- On Tue, 12/14/10, Brian Lloyd brian-wb6...@lloyd.com wrote:
From: Brian Lloyd brian-wb6...@lloyd.com
Subject: Re: [Flexradio] Two simple Questions - Replies
To: Tim Ellison telli...@itsco.com
Cc: Brad A. Steffler bst...@comcast.net, flexradio@flex-radio.biz
after all, we ARE in Texas, ya know...
http://www.youtube.com/watch?v=vjENhIdDsic
good luck in your new pursuits, w5xz, Dan, in Longview
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
we are BEGGING on 1.819...20 wpm...pse call
73, w5xz ( @ N8OO ) full size 4 square, long beverages..
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
( if you can copy cw, anyway )
a great opportunity to enjoy our marvelous receivers. there will be a large
number of ridiculously strong signals, with many weaker ones in between...
( shameless plug follows )
look for me, guest op at N8OO, ( I hope )..
73, w5xz, dan
peter
thanks for 'dumbing it down' for us bozo's who THINK we know what we're doing
!!
73, w5xz, dan
--- On Wed, 12/1/10, Peter G. Viscarola pete...@osr.com wrote:
From: Peter G. Viscarola pete...@osr.com
Subject: Re: [Flexradio] Maximized Window CPU Use
To: Tim Ellison telli...@itsco.com,
an old sb200, esp with pa0fri's mods, works great...except on 160m...
73, w5xz, dan
--- On Sat, 11/27/10, Mark Lunday wd4...@triad.rr.com wrote:
From: Mark Lunday wd4...@triad.rr.com
Subject: [Flexradio] Time for an amp for my F3K
To: flexradio@flex-radio.biz
Date: Saturday, November 27, 2010,
same here; happy thanksgiving to all !
and GO COWBOYS !!
73, W5XZ, dan
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
BRAVO Paul !!
--- On Mon, 11/8/10, scottw...@verizon.net scottw...@verizon.net wrote:
From: scottw...@verizon.net scottw...@verizon.net
Subject: [Flexradio] W1IMD to the rescue!
To: flexradio@flex-radio.biz
Date: Monday, November 8, 2010, 7:15 PM
A SUPER BIG thank you to Paul W1IMD, who
the 'best' deal is the 'family pack'...3 home premium installs on 3 machines,
your choice of 32 or 64 bit.. $150 stateside...( amazon )...
IMHO, 73, w5xz, dan
--- On Thu, 11/4/10, paim paimg0...@btinternet.com wrote:
From: paim paimg0...@btinternet.com
Subject: Re: [Flexradio] Fw: win 7 qustion
--- On Sun, 10/24/10, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: Re: [Flexradio] Legacy vs. Current (?) Firewire Drivers?
To: Tim Ellison telli...@itsco.com
Date: Sunday, October 24, 2010, 6:12 PM
tim
it doesnt play that way for me. win7 32 pro. using mother board
does anybody know how much bandwidth / speed it takes to get a
usable panadapter at, say, 15 FPS, over a remote ?
73, w5xz, dan
--- On Wed, 10/20/10, Tim Ellison telli...@itsco.com wrote:
From: Tim Ellison telli...@itsco.com
Subject: Re: [Flexradio] Question about remote operation
To: Mark
gary
i wind my phone line around a ferrite rod, just before it plugs into my dsl
modem.. looks like a filament choke for a g-g amp, ha ! but hey, it works...
--- On Wed, 10/20/10, Gary Strong gwstr...@verizon.net wrote:
From: Gary Strong gwstr...@verizon.net
Subject: Re: [Flexradio] Question
is there supposed to be an improvement in dpc's with faster ram? i've
tried tweaking my matched Corsair stix with factory info from both Corsair and
Asus, and my dpc's get worse
( ?? )...default slower setting seem better...Neal mentioned a little abt that
on hi blog, i think..
73, w5xz, dan
no, but your yl / xyl will want one, when she sees how much time you're on the
air !!!
73, w5xz, dan
--- On Wed, 10/6/10, ken kenw2...@comcast.net wrote:
From: ken kenw2...@comcast.net
Subject: Re: [Flexradio] Flex Forum
To: W1AEX - Rob w1aex.f...@cox.net, flexradio@flex-radio.biz
Date:
--- On Mon, 10/4/10, dan edwards w...@att.net wrote:
From: dan edwards w...@att.net
Subject: apparent knowledge base discrepancy for F3K...
To: flexradio-boun...@flex-radio.biz flexradio-boun...@flex-radio.biz
Cc: flex edge flexe...@flex-radio.biz
Date: Monday, October 4, 2010, 9:50 PM
which
door # 2...lucky guess, on my part, THIS time anyway...tnx tim...73...w5xz
--- On Tue, 10/5/10, Tim Ellison telli...@itsco.com wrote:
From: Tim Ellison telli...@itsco.com
Subject: RE: [Flexradio] Fw: apparent knowledge base discrepancy for F3K...
To: dan edwards w...@att.net, flex list flexradio
you would not believe the number of these signals a guy can hear in the
suburbs... especially on the low bands...my only relief has been to at least
limit their strength by azimuth heading with an Rx only 4 square, a la K7TJR /
HiZ antennas..
this AFTER 'cleaning house'
80m cw was
man, THATS an AMPLIFIER !!!
w5xz
--- On Fri, 8/27/10, H A Layer h...@sfsu.edu wrote:
From: H A Layer h...@sfsu.edu
Subject: [Flexradio] linear amplifiers for the FLEX-1500
To: flexradio@flex-radio.biz
Date: Friday, August 27, 2010, 6:49 PM
It would be interesting to compile a list of vintage
HEY, my 3-1000 still glows redha
w5xz, dan
--- On Fri, 8/27/10, Rob Sherwood r...@nc0b.com wrote:
From: Rob Sherwood r...@nc0b.com
Subject: Re: [Flexradio] linear amplifiers for the FLEX-1500
To: Brian Lloyd brian-wb6...@lloyd.com
Cc: flexradio@flex-radio.biz
Date: Friday, August 27, 2010,
I've had great luck with a Logitech ex100 wireless keyboard and mouse.
no rfi grief with kw on 160 to a vert thats only 80' awayAND, Target
had them on sale for 19.95 !! but, not a trackball
the center scroll wheel is a marvelous 'anywhere' VFO dial...NO more
elbow cramps tuning for
lots of people use blackviper's website...me included...seems to help
73, W5XZ, dan
--- On Mon, 8/16/10, Ray Fallen ray.fal...@gmail.com wrote:
From: Ray Fallen ray.fal...@gmail.com
Subject: [Flexradio] Windows 7 Services / Optimization
To: FlexRadio@flex-radio.biz
Date: Monday, August 16, 2010,
VERY NICE job neal...fills in several gaps in the eternal question 'how much
pc...'
hope someday you will elaborate on L-2 and L-3 cache, Passmark CPU ratings,CPU
speeds, DDR-3 RAM, and merits of multi-core CPU's...IF they make any
difference..
nice work...73, w5xz, dan
--- On Thu, 8/5/10,
1 - 100 of 166 matches
Mail list logo