: Monday, January 06, 2014 7:00 PM
To: apbid...@mailaps.org ; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
Left hand or right hand?
Paul
-Original Message-
From: Alan
Sent: Monday, January 06, 2014 5:36 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter
To: apbid...@mailaps.org ; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
Left hand or right hand?
Paul
-Original Message-
From: Alan
Sent: Monday, January 06, 2014 5:36 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
A hydrospanner also works well
Hi Matthew and Steve,
KJ4TN’s message about the S3 noise level minimum on the Flex 3K describes my
experience as well. While it varies from band to band a bit, my S Meter never
approaches zero, including when the antennas are disconnected or when I am
connected directly to the dummy load.
There is a small plastic screw near the bottom of the meter, make sure that
it is adjusted to zero with the power off.
73 Ross K9COX
-Original Message-
From: Bill Feldkamp
Sent: Monday, January 06, 2014 10:06 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] S Meter minimum
Hi
@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
There is a small plastic screw near the bottom of the meter, make sure that it
is adjusted to zero with the power off.
73 Ross K9COX
-Original Message-
From: Bill Feldkamp
Sent: Monday, January 06, 2014 10:06 AM
To: FlexRadio
Make sure none of the tubes inside glow bluish, except for the voltage
regulators.
73 - Mike WA8BXN
---Original Message---
From: Dale Hankins
Date: 1/6/2014 1:21:53 PM
To: 'Ross Stenberg'; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
I don't see small stuff like I did when I was younger. Is the screw head
straight slot, Phillips, torx, star, or what?
Patrick NJ5G
-Original Message-
From: Ross Stenberg
Sent: Monday, January 06, 2014 12:09 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
Is it a phillips head are straight screw?
Thanks for your good humor.
Matthew-KJ4TN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
No, it's a pot that you need to adjust. BobAC8O
Do THIS before eating carbs #40;every time#41;
1 EASY tip to increase fat-burning, lower blood sugar decrease fat storage
Is that a standard or metric Phillips head?
On Jan 6, 2014 2:42 PM, hmattc...@juno.com hmattc...@juno.com wrote:
Is it a phillips head are straight screw?
Thanks for your good humor.
Matthew-KJ4TN
___
FlexRadio Systems Mailing List
Message -
From: Ross Stenberg ross.stenb...@charter.net
To: FlexRadio@flex-radio.biz
Sent: Monday, January 06, 2014 12:09 PM
Subject: Re: [Flexradio] S Meter minimum
There is a small plastic screw near the bottom of the meter, make sure
that it is adjusted to zero with the power off
] S Meter minimum
Is that a standard or metric Phillips head?
On Jan 6, 2014 2:42 PM, hmattc...@juno.com hmattc...@juno.com wrote:
Is it a phillips head are straight screw?
Thanks for your good humor.
Matthew-KJ4TN
___
FlexRadio Systems Mailing List
-Original Message- From: Bill Feldkamp
Sent: Monday, January 06, 2014 10:06 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] S Meter minimum
Hi Matthew and Steve,
KJ4TN’s message about the S3 noise level minimum on the Flex 3K
describes my experience as well. While it varies from band
it is a Whitworth style head.
Patrick NJ5G
-Original Message- From: Jerry Falletta
Sent: Monday, January 06, 2014 2:07 PM
Cc: FlexRadio Reflector
Subject: Re: [Flexradio] S Meter minimum
Is that a standard or metric Phillips head?
On Jan 6, 2014 2:42 PM, hmattc...@juno.com hmattc...@juno.com
In repairing screw driver scratches on a monitor, it is best to use a belt
sander or palm sander?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
An electric drill works best :)
de Paul, W8AEF
-Original Message-
From: Randy Hall
Sent: Monday, January 06, 2014 3:02 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
In repairing screw driver scratches on a monitor, it is best to use a belt
sander or palm
randyh...@charter.net; FlexRadio@flex-radio.biz
Sent: Monday, January 06, 2014 7:14 PM
Subject: Re: [Flexradio] S Meter minimum
An electric drill works best :)
de Paul, W8AEF
-Original Message-
From: Randy Hall
Sent: Monday, January 06, 2014 3:02 PM
To: FlexRadio@flex-radio.biz
Subject
A hydrospanner also works well.
73s,
Alan
WA4SCA
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On
Behalf Of Gedas
Sent: Monday, January 06, 2014 6:20 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
I have been able to zero my
Left hand or right hand?
Paul
-Original Message-
From: Alan
Sent: Monday, January 06, 2014 5:36 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
A hydrospanner also works well.
73s,
Alan
WA4SCA
___
FlexRadio
Andit never will.
The s-meter shows the integrated power at the antenna port within the RX
filter. Make the RX filter smaller and the s-meter reading will decrease.
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone:
20 matches
Mail list logo
