Sent from my Samsung Epic™ 4G
Erik Hofman e...@ehofman.com wrote:
On Wed, 2010-12-08 at 17:13 -0800, Hal V. Engel wrote:
I used 120Hz (this is the same as the freq. of the FDM) and it almost works.
But the problem is that on each run there is enough variation in the
behavior
of the
On Thursday 09 December 2010 11:08:39 Hal V. Engel wrote:
On Thursday, December 09, 2010 09:11:39 am Curtis Olson wrote:
On Thu, Dec 9, 2010 at 10:10 AM, Hal V. Engel hven...@gmail.com wrote:
I am going to try using the autopilot between spins and during climb
outs to
get things in a
It would be really, really cool if you could do this using the JSBSim
internal features so it could run in stand-alone, too. :)
Ron
This is true, because JSBSim is well-suited to various GNC systems modeling.
This has already been done to some degree, but not a lot of time has been
spent on
On Wed, 2010-12-08 at 17:13 -0800, Hal V. Engel wrote:
I used 120Hz (this is the same as the freq. of the FDM) and it almost works.
But the problem is that on each run there is enough variation in the behavior
of the model that the control inputs eventually get out of sync with the
state
On Thu, Dec 9, 2010 at 10:10 AM, Hal V. Engel hven...@gmail.com wrote:
I am going to try using the autopilot between spins and during climb outs
to
get things in a know state (wings level and so on) as things progress
through
the flight. This should allow for the state of the flight and the
On Tue, 2010-12-07 at 15:49 -0800, Hal V. Engel wrote:
I was asked to record some flight data that is to be used for an aeronautical
engineering class. I used the instructions located here
http://wiki.flightgear.org/index.php/Suggested_Prerecorded_Flights
to do the recording and to test
On Wed, Dec 8, 2010 at 8:22 PM, Hal V. Engel wrote:
Yes I want to record and playback the controls using the native FDM of the
aircraft. I do not care at all about the lat/lon/height of the plane. I want
to be able to feed my control inputs into the playback and have the FDM
process this
7 matches
Mail list logo
