I'll continue supposing that the AKP is the Annunciator Keyboard Panel, and
the way to restore its functionality is to turn off/on the GCIO.
...I think..
Paride Bertollini
Invensys Foxboro Italia
Customer Service Dept.
mailto:[EMAIL PROTECTED]
-Original Message-
From: Johnson, Alex
my name is sven audenaert and i work as a field service engineer with
foxboro belgium since february 2000
here's some additional info
regards,
Sven Audenaert
service engineer
Foxboro Belgium N.V.
Kontichsesteenweg 54 B-2640 Aartselaar Belgium
T: +32 (0)3 205 14 30 F: +32 (0)3 232 17 09 D:+32
John,
Since 1999 we have version 6.1.1.
Hafedh Ghodhbani
Control and Instrument Engineer
British Gas Group
Hannibal Gas Plant Tunisia
ph 00 216 4 259 250
Fax 00 216 4 259 449
-Original Message-
From: John Miller [mailto:[EMAIL PROTECTED]]
Sent: 26 September 2001 12:22
To:
Hafedh:
I recommend having your system upgraded to version 6.1.2 (release update).
I have recently observed a similar issue at another site.
Installing 6.1.2 fixed the problem at that site.
After the upgrade verify that your CP40 style A processor is at EPROM ver.
1.20 (check in Sys Mgmt) and
Hi,
Is anyone of you already experienced with an upgrade of a Legacy historian?
Customer needs to make larger his historian, from 500 to 1000 points
without loosing his preexisting configuration.
Do the saveh50 and loadh50 utilities allow this?
Step by step:
-saveh50
-recommit with new
You should give consideration to moving to AIM*. It contains migration
utilities that preserve the customer's data and configuration information.
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED]
And now a customer perspective...
Pros of AIM*Historian:
1. You can modify it while it is running.
2. You can run it on the NT platform as well as AW51, and you can set
up remote collectors on both NT and Unix platforms.
3. Much better archiving and storage tools.
4.
Re: Loading
The load is proportional to the number of changes and the update rates.
What is your setting for fastest_rsr in /opt/fox/ais/bin/foxapi.cfg? This
controls how often updates are sent from the CP to the historian.
How do you change deltas now compare with the ones then?
Re:
Alex,
We have configured most flows to update at 10 seconds, and most everything
else to update at 30 seconds, with change deltas of 0.1% of engineering
units. I wish there was a way to configure deltas as percent of actual
observed range, like the Biles AIM product used to have. That would
We have migrated our legacy historian several times using saveh50 and
loadh50. It actually works pretty well.
The saveh50 utility unloads the Informix data and table structure to a
series of sql scripts and files of ascii data. There is not a lot of
interaction once the process starts. It
Re: fastest_rsr
I believe that parameter of the same name is in the AIM*API file. By
default, it forces all updates to 0.5 second scans regardless of the
recording rate set in the historian. I suspect that this is most of your
load.
Re: Obtaining the Solaris Configurator
You should contact
I am familiar with the Legacy Historian but I was recently at a plant where
they had the new AIM* Historian. It was installed on a Sun machine. I
really like the fact that you can change its configuration without shutting
it down. This allowed us to tighten many deadbands specifically for the
Sorry
AKP is for Annunciator Keyboard Panel
Johnson, Alex (Foxboro) wrote:
I'll start with the simplest question. What is AKP?
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED]
John Metsker experienced some unknown problems posting his message to the
list, so I'm trying to see if I can do it for him. Let's hope the server
doesn't pass all of his postings now, including this one. Anyway, here
goes
Duc
Re: foxpai.cfg and fastest_rsr
There is a brief description of fastest_rsr in the QF990084 and how you can change
it. I have used this variable with FoxAPI. The deafult value is 1 (means 1/2 seconds),
every steps means 1/2 sec, i.e., if fastest_rsr = 10, that means 5 seconds. I am not
sure if
15 matches
Mail list logo
