This is not much to go on, but basis my experience with FoxCAE 3.X, FoxCAE
is way too complicated and non-intuitive for an occasional user. I suggest
some of the focus points to be:
1. Provide a menu interface that is intuitive for back documentation and
provide very good instructions.
:
was Neil Martin/US/PC/HUNTSMAN
received
Some things to think about. On the plus side FoxDraw has the build and
configuration functions within the same program, it is easier to edit text,
some additional file formats can sometimes be incorporated into a FoxDraw
graphic, you can create some nifty looking graphics, and there might be
Before you spend money on new AWs, I hope you have reviewed the
possibilities of adding more memory, reducing your PI data parameters to
reduce the changes per minute rate, and made sure your OM () lists are
optimized. Are you running the PI server on your AW? If so, I would
recommend
FYI,
Refurbished Sun Ultra30 boxes can be had for about $3,500 and Ultra5 for
about $1,200.
Hicks, Gaylon F.
In addition to your list, I have Seagate ST34312A (4.3GB) and ST38410A
(8.6GB) as drives than can potentially be used. You will need to check the
install script on your version of software to see which ones your software
version will recognize. We are at V6.2.1. The higher the rev, the more
We have two FT pair of CP60s installed in our operating units and in both
cases the Fieldbus has caused us numerous headaches until we figured out
the correct installation. In fact we are still having some problems. We
thought the coax ethernet cabling would be easy, but we discovered
a
download of the module from System Mgmt., they will probably find that the
module will boot.
Neil Martin
Craig
limitation or just a license limitation). Are we asking for a
bootless CP upgrade for this type of installation?
2. Do we consider the Micro I/A to be a CP? It is to me, but it can not
be made Fault Tolerant.
Neil Martin
Neil_Martin@hun
Foxboro's touchscreen CRTs have a touchscreen unit in them that is made by
MicroTouch. Foxboro has someone outfit the CRTs with the touchscreens.
Even more difficult is the thought that I believe the touchscreen
controller is not located in the CRT chassis. I believe it is located in
the GCIO.
Have you tried SAO = TRUE and SCOPT = 1 (for all transitions)?
dhawly hawpyt
The AW51B is a Sun SPARC 5. I am only aware of 32MB RAM (SIMMs or DIMMs
??) being available. You should consider 64MB to be the minimum, but 128MB
is recommended especially if you are running FoxView/FoxDraw.
:
was Neil Martin/US/PC/HUNTSMAN
received
Alex,
I think the threads concerning NT started when someone picked up on an ARC
note that seemed to be saying Foxboro was migrating towards a new
architecture - essentially Wonderware on I/A NT. I wonder if some one in
Foxboro Marketing could clarify the issue concerning the future directions
:
was Neil Martin/US/PC/HUNTSMAN
received
15 matches
Mail list logo