RE: Report Writer
G'day Noman, I have a similar situation occurring at one of my sites (although it occurred on demand reports as well) and raised a CAR (see #165). Apparently, if you are using a Style B control processor (I guess this would include a CP60) and an AW that is NOT a Style E there is some kind of speed mismatch that will not allow the Report Writer to extract more than 29 consecutive parameters from a CP. Has anyone else had an experience that can confirm/deny the above? I'm told that the target version for a fix for this is V6.3, but I think I'll test it first before informing the customer. Does anyone know what the official release date of V6.3 is? I hope everyone runs suitably amok on New Years Eve. Nic Glenister Foxboro Melbourne -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Noman Abu-Farha Sent: Friday, December 29, 2000 9:21 AM To: [EMAIL PROTECTED] Subject: Report Writer Hapy New Year to all . In our company we have report which is used to collect data from the object manager and scheduled daily. In each day we get dashes --- in some of the data field. Every day this happens in different data fields (not in the same one). But if we demand the report . The report will be complete and without any missing. Pleas help me in solving this problem Noman Jubail Chemical Industries Co. KSA. --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
Historizing objects other than C:B.P's
G'day guys, Has anyone out there had any experience with historizing objects that aren't simple Compound:Block.Parameters? Is it even possible? In particularly, I want to trend nodebus loading over a period of days, instead of just taking a small snapshot. Or is there an easier way to monitor loading over an extended period of time? Any help/ideas would be most appreciated. Nic Glenister Foxboro Melbourne --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
51D's external hard disks
G'day list, Has anyone had any success in using 51D's with 4.2Gb external SCSI system disks? Rumour has it, it's supposed to be possible - according to B0400PT anyway. I've Day Zeroed it, but I can't get it to boot. And yes, I have changed the altdisk (originally raid) device label. It starts going through the boot process from the external hard disk, but continually panic dumps. Cheers, Nic --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: 51D's external hard disks
Hi Warren, Thanks for your response. The release Day Zeroed onto the external hard drive is V6.2 - attempted both with and without the Pre-Install Diskette to the same end. The panic message (after boot kabd command) is as follows: Cannot mount root on /pseudo/md@0:0,0,blk fstype ufs panic[cpu0]/thread=0x10402040: vfs_mountroot: cannot mount root stopped at E_Syslimit+0x84:ta %icc,%go + 125 Feel free to decipher this at will. Cheers, Nic -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Warren Brown Sent: Monday, September 24, 2001 5:43 PM To: [EMAIL PROTECTED] Subject: Re: 51D's external hard disks Hello Nic You don't say which release you day 0'd onto the drive. What was the panic message ? Was it bad root or could not mount root ? Did you check /etc/system for rootdev etc. ? If the system reboots too fast to see the message, at the OK prompt type boot kadb and it will the system at the kadb level after the panic message so you can see what was printed. Warren Brown [Former Foxboro Development guy who worked on Solaris systems ] Now working in a non-related field. From: Nic Glenister [EMAIL PROTECTED] Reply-To: Foxboro DCS Mail List [EMAIL PROTECTED] To: Foxboro DCS Mail List [EMAIL PROTECTED] Subject: 51D's external hard disks Date: Mon, 24 Sep 2001 20:37:47 +1000 MIME-Version: 1.0 Received: from [209.145.196.197] by hotmail.com (3.2) with ESMTP id MHotMailBD78583B000D4004325AD191C4C5BBA40; Mon, 24 Sep 2001 03:38:56 -0700 Received: from foxboro.com.au by lists.CyberSpaces.net with SMTP; Mon, 24 Sep 2001 03:37:52 -0700 From [EMAIL PROTECTED] Mon, 24 Sep 2001 03:40:48 -0700 Message-ID: 005101c144e4$f3d7e850$[EMAIL PROTECTED] X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: [EMAIL PROTECTED] Precedence: Bulk List-Software: LetterRip Pro 3.0.7 by Fog City Software, Inc. List-Subscribe: mailto:[EMAIL PROTECTED] List-Unsubscribe: mailto:[EMAIL PROTECTED] G'day list, Has anyone had any success in using 51D's with 4.2Gb external SCSI system disks? Rumour has it, it's supposed to be possible - according to B0400PT anyway. I've Day Zeroed it, but I can't get it to boot. And yes, I have changed the altdisk (originally raid) device label. It starts going through the boot process from the external hard disk, but continually panic dumps. Cheers, Nic --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]